An official website of the United States government
Complexes that undergo ligand-to-metal charge transfer (LMCT) to d0 metals are of interest as possible photocatalysts. Cp2Ti(C2Ph)2 (where C2Ph = phenylethynyl) was reported to be weakly emissive in room temperature (RT) fluid solution from its phenylethynyl-to-Ti 3LMCT state, but readily photodecomposes. Coordination of CuX between the alkyne ligands to give Cp2Ti(C2Ph)2CuX (X = Cl or Br) has been shown to significantly increase the photostability, but such complexes are not emissive in RT solution. Herein, we investigate whether inhibition of alkyne-Ti-alkyne bond compression might be responsible for the increased photostability of the CuX complexes by investigating the decomposition of a structurally constrained analogue, Cp2Ti(OBET) (OBET = o-bis(ethynyl)tolane). To investigate the mechanism of nonradiative decay from the 3LMCT states in Cp2Ti(C2Ph)2CuX, the photophysical properties were investigated both upon deuteration and upon rigidifying in poly(methyl methacrylate) film. These investigations suggested that inhibition of structural rearrangement may play a dominant role in increasing emission lifetimes and quantum yields. The bulkier Cp*2Ti(C2Ph)2CuBr was prepared and is emissive at 693 nm in RT THF solution with a photoluminescent quantum yield of 1.3 x 10–3 ( = 0.18 s). TDDFT calculations suggest emission occurs from a 3LMCT state dominated by Cp*-to-Ti charge transfer.
more »
« less
This content will become publicly available on August 21, 2026
Luminescent Arylalkynyltitanocenes: Effect of Modifying the Electron Density at the Arylalkyne Ligand, or Adding Steric Bulk or Constraint to the Cyclopentadienyl Ligand
Photocatalysis using complexes of d0 metals with ligand-to-metal charge-transfer (LMCT) excited states is an active area of research. Because titanium is the second most abundant transition metal in the earth’s crust, d0 complexes of TiIV are an appropriate target for this research. Recently, our group has demonstrated that the arylethynyltitanocene Cp2Ti(C2Ph)2CuBr is not emissive in room-temperature fluid solution, whereas the corresponding Cp* complex, Cp*2Ti(C2Ph)2CuBr, is emissive. The Cp* ligand is hypothesized to provide steric constraint that inhibits excited-state structural rearrangement. However, modifying the structure also changes the orbital character of the excited state. To investigate the impact of the excited-state orbital character on the photophysics, herein we characterize complexes similar to Cp*2Ti(C2Ph)2CuBr—but one with a more electron-rich arylethynyl ligand, ethynyldimethylaniline (C2DMA), and one with a more electron-poor arylethynyl ligand, ethynyl-α,α,α-trifluorotoluene. We have also prepared complexes with the C2DMA ligand but with different Cp ligands that adjust the steric bulk and constraint around the Ti, by replacing the Cp* ligands with either indenyl ligands or an ansa-cyclopentadienyl ligand where the two Cp ligands are bridged by a dimethylsilylene. All four target complexes have been characterized crystallographically and structure activity relationships are highlighted.
more »
« less
- PAR ID:
- 10629655
- Publisher / Repository:
- MDPI
- Date Published:
- Journal Name:
- Crystals
- Volume:
- 15
- Issue:
- 8
- ISSN:
- 2073-4352
- Page Range / eLocation ID:
- 745
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Palladium-catalyzed fluoroalkylations of aryl halides are valuable reactions for the synthesis of fluorinated, biologically active molecules. Reductive elimination from an intermediate Pd(aryl)(fluoroalkyl) complex is the step that forms the C(aryl)–C(fluoroalkyl) bond, and this step typically requires higher temperatures and proceeds with slower rates than the reductive elimination of nonfluorinated alkylarenes from the analogous Pd(aryl)(alkyl) complexes. The experimental rates of this step correlate poorly with common parameters, such as the steric property or the electron-withdrawing ability of the fluoroalkyl ligand, making the prediction of rates and the rational design of Pd-catalyzed fluoroalkylations difficult. Therefore, a systematic study of the features of fluoroalkyl ligands that affect the barrier to this key step, including steric properties, electron-withdrawing properties, and secondary interactions, is necessary for the future development of fluoroalkylation reactions that occur under milder conditions and that tolerate additional types of fluoroalkyl reagents. We report computational studies of the effect of the fluoroalkyl (RF) ligand on the barriers to reductive elimination from Pd(aryl)(RF) complexes (RF = CF2CN, CF2C(O)Me, etc.) containing the bidentate ligand di-tert-butyl(2-methoxyphenyl)phosphine (L). The computed Gibbs free-energy barriers to reductive elimination from these complexes suggest that fluoroalkylarenes should form quickly at room temperature for the fluoroalkyl ligands we studied, excluding RF = CF3, CF2Me, C2F5, CF2CFMe2, CF2Et, CF2iPr, or CF2tBu. Analyses of the transition-state structures by natural bond orbital (NBO) and independent gradient model (IGMH) approaches reveal that orbital interactions between the Pd center and a hydrogen atom or π-acid bonded to the α-carbon atom of the RF ligand stabilize the lowest-energy transition states of Pd(aryl)(RF) complexes. Comparisons between conformers of transition-state structures suggest that the magnitude of such stabilizations is 4.7–9.9 kcal/mol. In the absence of these secondary orbital interactions, a more electron-withdrawing fluoroalkyl ligand leads to a higher barrier to reductive elimination than a less electron-withdrawing fluoroalkyl ligand. Computations on the reductive elimination from complexes containing para-substituted aryl groups on palladium reveal that the barriers to reductive elimination from complexes containing more electron-rich aryl ligands tend to be lower than those to reductive elimination from complexes containing less electron-rich aryl ligands when the fluoroalkyl ligands of these complexes can engage in secondary orbital interactions with the metal center. However, the computed barriers to reductive elimination do not depend on the electronic properties of the aryl ligand when the fluoroalkyl ligands do not engage in secondary orbital interactions with the metal center.more » « less
-
The excited-state dynamics of fac-Co(ppy)3, where ppy = 2-[2-(pyridyl)phenyl], are measured with femtosecond UV-Vis transient absorption spectroscopy. The initial state is confirmed with spectroelectrochemistry to have significant metal-to-ligand charge transfer (MLCT) character, unlike other Co complexes that generally have ligand-to-metal charge transfer or ligand-field transitions in this energy range. Ground-state recovery occurs in 8.65 ps in dichloromethane. Density functional theory (DFT) calculations show that the MLCT state undergoes Jahn-Teller distortion and converts to a 5-coordinate 3MC state in which one Co-N bond is broken. The results highlights a potential pitfall of heteroleptic-bidentate ligands when designing strong-field ligands for transition metal chromophores.more » « less
-
[Cp*Rh] complexes (Cp* = pentamethylcyclopentadienyl) supported by bidentate chelating ligands are a useful class of compounds for studies of redox chemistry and catalysis. Here, we show that the bis(2-pyridyl)methane ligand, also known as dipyridylmethane or dpma, can support [Cp*Rh] complexes in the formally + iii and + ii rhodium oxidation states. Specifically, two new rhodium complexes ([Cp*Rh(dpma)(L)] n+ , L = Cl − , CH 3 CN) have been isolated and structurally characterized, and the properties of the complexes have been compared with those of [Cp*Rh] complexes bearing the related dimethyldipyridylmethane (Me 2 dpma) ligand. Complex [Cp*Rh(dpma)(NCCH 3 )] 2+ displays a quasireversible rhodium( iii / ii ) reduction by cyclic voltammetry; related electron paramagnetic resonance (EPR) spectroscopic studies confirm access to the unusual rhodium( ii ) oxidation state. Further reduction to the formally rhodium( i ) oxidation state, however, is followed by deprotonation of dpma, as observed in electrochemical studies and chemical reduction experiments. This reactivity can be understood to occur as a consequence of the presence of doubly benzylic protons in the dpma ligand, since use of the analogous Me 2 dpma enables reduction to rhodium( i ) without involvement of ligand deprotonation. These findings highlight the important role of the ligand backbone substitution pattern in influencing the stability of highly-reduced complexes, a key class of metal species for study of electron and proton management in catalysis.more » « less
-
The design of deep-red to near-infrared (DR-NIR) phosphorescent compounds with high photoluminescence quantum yields ( Φ PL ) is a significant fundamental challenge that impacts applications including optoelectronic devices, imaging, and sensing. Here we show that bis-cyclometalated iridium complexes with electron-rich ancillary ligands can have exceptional quantum yields for DR-NIR phosphorescence (peak λ > 700 nm). Six bis-cyclometalated iridium( iii ) complexes with DR-NIR phosphorescence are described in this work, pairing highly conjugated cyclometalating ligands with electron-rich and sterically encumbered β-ketoiminate (acNac), β-diketiminate (NacNac), and N , N ′-diisopropylbenzamidinate (dipba) ancillary ligands. The photoluminescence spectra and quantum yields are solvent-dependent, consistent with significant charge-transfer character in the emissive excited state. The ancillary ligands perturb the excited-state kinetics relative to closely related compounds, which can lead to enhanced Φ PL values in the DR-NIR region, particularly in toluene solution and in doped polymer films.more » « less
