Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Design Rules for 3D Printing‐Assisted Pressure Sensor Manufacturing: Achieving Broad Pressure Range Linearity
Abstract Recent advancements in 3D printing technology have expanded its application to manufacturing pressure sensors. By harnessing the cost‐effectiveness, streamlined processes, and design flexibility of 3D printing, sensor fabrication can be customized to meet specific performance needs. Thus far, 3D printing in pressure sensor development has been primarily limited to creating molds for transferring patterns onto flexible substrates, restricting both material selection and sensor performance. To fully unlock the potential of 3D printing in advanced pressure sensor fabrication, it is crucial to establish effective design rules focused on enhancing the figure of merit performance. This study introduces a universal design strategy aimed at maintaining high sensitivity across a wide pressure range—a challenging feat, as sensitivity significantly decreases at higher pressures. Our approach centers on engineering the deformability of 3D‐printed structures, achieving a linear increase in contact area between sensor patterns and electrodes without reaching saturation. Sensors designed with high elongation and low stiffness exhibit consistent sensitivity of 162.5 kPa⁻¹ across a broad pressure range (0.05–300 kPa). Mechanistic investigations through finite element analysis confirm that engineered deformability is key to achieving this enhanced linear response, offering robust sensing capabilities for demanding applications such as deep‐sea and space exploration.  more » « less
Award ID(s):
2207302
PAR ID:
10633252
Author(s) / Creator(s):
; ; ; ; ; ; ; ;
Publisher / Repository:
Wiley
Date Published:
Journal Name:
Advanced Functional Materials
Volume:
35
Issue:
4
ISSN:
1616-301X
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Nature Communications)
    Abstract Despite the extensive developments of flexible capacitive pressure sensors, it is still elusive to simultaneously achieve excellent linearity over a broad pressure range, high sensitivity, and ultrahigh pressure resolution under large pressure preloads. Here, we present a programmable fabrication method for microstructures to integrate an ultrathin ionic layer. The resulting optimized sensor exhibits a sensitivity of 33.7 kPa −1 over a linear range of 1700 kPa, a detection limit of 0.36 Pa, and a pressure resolution of 0.00725% under the pressure of 2000 kPa. Taken together with rapid response/recovery and excellent repeatability, the sensor is applied to subtle pulse detection, interactive robotic hand, and ultrahigh-resolution smart weight scale/chair. The proposed fabrication approaches and design toolkit from this work can also be leveraged to easily tune the pressure sensor performance for varying target applications and open up opportunities to create other iontronic sensors. 
    more » « less
  2. ; ; ; (, Molecules)
    Sensitive and flexible pressure sensors have invoked considerable interest for a broad range of applications in tactile sensing, physiological sensing, and flexible electronics. The barrier between high sensitivity and low fabrication cost needs to be addressed to commercialize such flexible pressure sensors. A low-cost sacrificial template-assisted method for the capacitive sensor has been reported herein, utilizing a porous Polydimethylsiloxane (PDMS) polymer and a multiwalled carbon nanotube (MWCNT) composite-based dielectric layer. The sensor shows high sensitivity of 2.42 kPa−1 along with a low limit of detection of 1.46 Pa. The high sensitivity originates from adding MWCNT to PDMS, increasing the composite polymer’s dielectric constant. Besides this, the pressure sensor shows excellent stability at a cyclic loading of 9000 cycles, proving its reliability for long-lasting application in tactile and physiological sensing. The high sensitivity of the sensor is suitable for the detection of small deformations such as pulse waveforms as well as tactile pressure sensing. In addition, the paper demonstrates a simultaneous contact and non-contact sensing capability suitable for dual sensing (pressure and proximity) with a single data readout system. The dual-mode sensing capability may open opportunities for realizing compact systems in robotics, gesture control, contactless applications, and many more. The practicality of the sensor was shown in applications such as tactile sensing, Morse code generator, proximity sensing, and pulse wave sensing. 
    more » « less
  3. ; ; ; ; ; (, Advanced Electronic Materials)
    Abstract Microfluidic‐based wearable electrochemical sensors represent a transformative approach to non‐invasive, real‐time health monitoring through continuous biochemical analysis of body fluids such as sweat, saliva, and interstitial fluid. These systems offer significant potential for personalized healthcare and disease management by enabling real‐time detection of key biomarkers. However, challenges remain in optimizing microfluidic channel design, ensuring consistent biofluid collection, balancing high‐resolution fabrication with scalability, integrating flexible biocompatible materials, and establishing standardized validation protocols. This review explores advancements in microfluidic design, fabrication techniques, and integrated electrochemical sensors that have improved sensitivity, selectivity, and durability. Conventional photolithography, 3D printing, and laser‐based fabrication methods are compared, highlighting their mechanisms, advantages, and trade‐offs in microfluidic channel production. The application section summarizes strategies to overcome variability in biofluid composition, sensor drift, and user adaptability through innovative solutions such as hybrid material integration, self‐powered systems, and AI‐assisted data analysis. By analyzing recent breakthroughs, this paper outlines critical pathways for expanding wearable sensor technologies and achieving seamless operation in diverse real‐world settings, paving the way for a new era of digital health. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Nano-Micro Letters)
    Abstract Despite extensive development of flexible pressure sensors, it is still difficult for them to simultaneously achieve high precision and a large response to subtle pressures. To address these challenges, this work demonstrates a flexible pressure sensing platform that features the reduced graphene oxide aerogel sandwiched between a polydimethylsiloxane encapsulation layer and a thin polyimide film with interdigital electrodes. The resulting pressure sensor exhibits a high sensitivity of 698.96 kPa−1and a low limit of detection (~ 1 Pa), and outstanding stability over 20,000 loading/unloading cycles. Besides monitoring various physiological signals and human motions, the flexible pressure sensors can be configured into an array layout as a smart artificial electronic skin to recognize the spatial pressure distribution. The flexible pressure sensor can also be integrated with signal processing and wireless communication modules as a teleoperation system for gesture recognition, force feedback control, and kitchen food recognition, highlighting future potential toward smart robotics and human–machine interfaces. 
    more » « less
  5. ; ; ; ; ; ; ; ; ; (, Advanced Materials)
    Abstract A new manufacturing paradigm is showcased to exclude conventional mold‐dependent manufacturing of pressure sensors, which typically requires a series of complex and expensive patterning processes. This mold‐free manufacturing leverages high‐resolution 3D‐printed multiscale microstructures as the substrate and a gas‐phase conformal polymer coating technique to complete the mold‐free sensing platform. The array of dome and spike structures with a controlled spike density of a 3D‐printed substrate ensures a large contact surface with pressures applied and extended linearity in a wider pressure range. For uniform coating of sensing elements on the microstructured surface, oxidative chemical vapor deposition is employed to deposit a highly conformal and conductive sensing element, poly(3,4‐ethylenedioxythiophene) at low temperatures (<60 °C). The fabricated pressure sensor reacts sensitively to various ranges of pressures (up to 185 kPa−1) depending on the density of the multiscale features and shows an ultrafast response time (≈36 µs). The mechanism investigations through the finite element analysis identify the effect of the multiscale structure on the figure‐of‐merit sensing performance. These unique findings are expected to be of significant relevance to technology that requires higher sensing capability, scalability, and facile adjustment of a sensor geometry in a cost‐effective manufacturing manner. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email