skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Investigating Biomimetic Chemoresponsive Cation–π Interactions Using Raman Spectroscopy
ABSTRACT Biomimetic designs are inspired by the complex and unique behavior of naturally occurring materials, and can be applied to many systems, including polymers. ZIPer polymers (Zwitter arene‐ion like polymer) are inspired by byssal threads found on mussels, and their physical state is highly sensitive to various environmental conditions. Specifically, the ZIPer polymer undergoes chemospecific phase transitions, exhibiting potential for its use as an ionic responsive technology. Though this phenomenon has been observed with Raman spectroscopy, little is known about how salt identity or concentration affect polymer inter‐ and intra‐chain interactions. Previous studies have used Raman spectroscopy to analyze ZIPer polymer behavior in the presence of salt; however, the effect is typically only observed with sodium chloride and often only compares spectra at two concentrations. Additionally, studies have mainly focused on the spectral evidence of cation–π interactions, significantly narrowing their spectral range. In order to develop a more predictive framework for ZIPer polymer behavior, a range of salt identities and concentrations need to be tested. This study uses Raman spectroscopy to investigate ZIPer polymer behavior in the presence of a series of salts, namely NaCl, NaOTFA, NaBr, NaBF4, and NaPF6, each at 0.1 M, 0.5 M, 1.0 M, and 1.5 M concentrations. Moreover, we observe spectral changes in a range from 550 to 2000 cm−1. Spectral evidence suggests that the cation–π interactions previously hypothesized to be the driver of ZIPer polymer behavior are not the only mechanism determining the chemoresponsive phase transitions. We hypothesize that cation–π interactions and dispersion forces are competing mechanisms controlling ZIPer polymer behavior. Furthermore, we suggest that at certain concentrations the dominating mechanism transitions, and this inflection point is salt identity dependent.  more » « less
Award ID(s):
2429239
PAR ID:
10640436
Author(s) / Creator(s):
 ;  ;  ;  ;  ;  ;  ;  
Publisher / Repository:
John Wiley & Sons Ltd.
Date Published:
Journal Name:
Journal of Raman Spectroscopy
Volume:
56
Issue:
9
ISSN:
0377-0486
Page Range / eLocation ID:
808 to 816
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Macromolecules)
    Aromatic rings are a common feature of biological and synthetic polymers that form polyelectrolyte complexes and coacervates. These functional groups can engage in cation−π interactions; however, the impact of such interactions on the physical properties of polyelectrolyte complex materials is not well understood. Here, we investigate the effect of cation−π interactions on the phase behavior and viscoelasticity of polyelectrolyte complexes of poly(styrenesulfonate) (PSS) and poly(diallyldimethylammonium), which contain aromatic functional groups on every repeat unit of the PSS polyanion. We prepare samples with matched polymer and/or salt concentrations using salts with different cation−π interaction strengths. Characterization by turbidity, thermogravimetric analysis, and rheology reveals that salts that engage in stronger cation−π interactions destabilize coacervation and speed up the viscoelastic relaxation of the materials. By contrast, removing the aromatic ring by replacing PSS with poly(2-acrylamido-2-methylpropanesulfonate removes the sensitivity of the phase behavior and viscoelasticity of the complexes to the cation−π interaction strength of the salt. These results reveal that cation−π interactions play a significant role in determining the phase behavior and viscoelasticity of polyelectrolyte complexes and coacervates made from polymers with aromatic functional groups and suggest that cation−π interactions may be a useful molecular handle for tuning coacervate properties. 
    more » « less
  2. ; ; ; (, ACS Applied Polymer Materials)
    A mussel-inspired mechanism was used to solve the problem of filler aggregation in rubber composites. This research aims to improve carbon black (CB) dispersion in epoxidized natural rubber (ENR) composites through π−π stacking and cation−π interactions by adding dopamine (D). In this study, various aromatic interactions (π−π stacking and cation−π interactions) between the D-functionalized ENR molecules and the surface of the CB were observed by Fourier transform infrared (FTIR) and Raman spectroscopy. Notably, the small and wideangle X-ray scattering (SAXS/WAXS) analyses supported our inference from the rubber processing analysis (RPA) and transmission electron microscopy (TEM) results that the aromatic interactions enhanced the CB dispersion in ENR composites. This phenomenon improved the tensile strength (138%), Young’s modulus (93%), and energy-saving properties (50%). Finally, this research provided an alternative strategy using mussel-inspired material to solve the CB aggregation problem in rubber products, yielding ENR composites with superior performance properties. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Functional Materials)
    Katz, Howard (Ed.)
    Abstract The design of polymeric semiconductors exhibiting high electrical conductivity (σ) and thermoelectric power factor (PF) will be vital for flexible large‐area electronics. In this work, four polymers based on diketopyrrolopyrrole (DPP), 2,3‐dihydrothieno[3,4‐b][1,4]dioxine (EDOT), thieno[3,2‐b]thiophene (TT), and 3, 3′‐bis (2‐(2‐(2‐methoxyethoxy) ethoxy) ethoxy)‐2, 2′‐bithiophene (MEET) are investigated as side‐chains, with the MEET polymers newly synthesized for this study. These polymers are systematically doped with tetrafluorotetracyanoquinodimethane ( F4TCNQ), CF3SO3H, and the synthesized dopant Cp(CN)3‐(COOMe)3, differing in geometry and electron affinity. The DPP‐EDOT‐based polymer containing MEET as side‐chains exhibits the highest conductivity (σ) ≈700 S cm−1 in this series with the acidic dopant (CF3SO3H). This polymer also shows the lowest oxidation potential by cyclic voltammetry (CV), the strongest intermolecular interactions evidenced by differential scanning calorimetry (DSC), and has the most oxygen‐based functionality for possible hydrogen bonding and ionic screening. Other polymers exhibit high σ ≈300–500 S cm−1 and power factor up to 300 µW m−1K−2. The mechanism of conductivity is predominantly electronic, as validated by time‐dependent conductance studies and transient thermo voltage monitoring over time, including for those doped with the acid. These materials maintain significant thermal stability and air stability over ≈6 weeks. Density functional theory calculations reveal molecular geometries and inform about frontier energy levels. Raman spectroscopy, in conjunction with scanning electron microscopy (SEM‐EDS) and x‐ray diffraction, provides insight into the solid‐state microstructure and degree of phase separation of the doped polymer films. Infrared spectroscopy enables this study to further quantify the degree of charge transfer from polymer to dopant. 
    more » « less
  4. ; ; ; ; ; ; ; (, Acta Crystallographica Section E Crystallographic Communications)
    Bis(triphenylsulfonium) tetrachloridomanganate(II), (C18H15S)2[MnCl4] (I), triphenylsulfonium tetrachloridoferrate(III), (C18H15S)[FeCl4] (II), and bis(triphenylsulfonium) tetrachloridocobaltate(II), (C18H15S)2[CoCl4] (III), crystallize in the monoclinic space groupsP21/n[(I) and (III)] andP21/c[(II)]. Compounds (I) and (III) each contain two crystallographically independent triphenylsulfonium (TPS+) cations in the asymmetric unit, whereas (II) has one. In all three compounds, the sulfonium centers adopt distorted trigonal–pyramidal geometries, with S—C bond lengths falling roughly in the 1.78–1.79 Å range and C—S—C angles observed at about 101 to 106°. The [MCl4]n−anions (M= Mn2+, Fe3+, Co2+;n= 2,1,2) adopt slightly distorted tetrahedral geometries, withM—Cl bond lengths in the 2.19–2.38 Å range and Cl—M—Cl angles of approximately 104–113°. Hirshfeld surface analyses shows that H...H and H...C contacts dominate the TPS+cation environments, whereas H...Cl and shortM—S interactions link each [MCl4]n−anion to the surrounding cations. In (I) and (III), inversion-centered π–π stacking further consolidates the crystal packing, while in (II) no π–π interactions are observed. 
    more » « less
  5. ; ; ; (, IUCrData)
    The title thiazole orange derivative, bearing an alkene substituent, crystallized as a monohydrate of its iodide salt, namely, (Z)-1-(hex-5-en-1-yl)-4-{[3-methyl-2,3-dihydro-1,3-benzothiazol-2-ylidene]methyl}quinolin-1-ium iodide monohydrate, C24H25N2S+·I−·H2O. The packing features aromatic π-stacking and van der Waals interactions. The water molecule of crystallization interacts with the cation and anionviaO—H...N and O—H...I hydrogen bonds, respectively. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email