An official website of the United States government
Abstract Functioning ingestible capsules offer tremendous promise for a plethora of diagnostic and therapeutic applications. However, the absence of realistic and practical power solutions has greatly hindered the development of ingestible electronics. Microbial fuel cells (MFCs) hold great potential as power sources for such devices as the small intestinal environment maintains a steady internal temperature and a neutral pH. Those conditions and the constant supply of nutrient‐rich organics are a perfect environment to generate long‐lasting power. Although previous small‐scale MFCs have demonstrated many promising applications, little is known about the potential for generating power in the human gut environment. Here, this work reports the design and operation of a microbial biobattery capsule for ingestible applications. DormantBacillus subtilisendospores are a storable anodic biocatalyst that will provide on‐demand power when revived by nutrient‐rich intestinal fluids. A conductive, porous, poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate hydrogel anode enables superior electrical performance in what is the world's smallest MFC. Moreover, an oxygen‐rich cathode maintains its effective cathodic capability even in the oxygen‐deficit intestinal environment. As a proof‐of‐concept demonstration in stimulated intestinal fluid, the biobattery capsule produces a current density of 470 µA cm−2and a power density of 98 µW cm−2, ensuring its practical efficacy as a novel and sole power source for ingestible applications in the small intestine.
more »
« less
A Transient Spore‐Forming Microbial Fuel Cell with Extracellularly Biosynthesized Tin Oxide Nanoparticles for Powering Disposable and Green Papertronics
Abstract Transient electronics, which can operate only for short‐lived applications and then be eco‐friendly disintegrated, create opportunities in environmental sensing, healthcare, and hardware security. Paper‐based electronics, or papertronics, recently have rapidly advanced the physically transient device platform because paper as a foundation offers an environmentally sustainable and cost‐effective option for those increasingly pervasive and fast‐updated single‐use applications. Paper‐based power supplies are indispensable to realize a fully papertronic paradigm and are a critical enabler of environmentally benign power solutions. Microbial fuel cells (MFCs) hold great potential as power sources for such green papertronic applications. This work reports the design, operation, and optimization of a high‐power papertronic MFC by biosynthesizing microbe‐mediated tin oxide nanoparticles (SnO2NPs) on dormant Bacillus subtilis endospores. They form an electrical conduit that improves electron harvesting during the spore germination and power generation. The MFC is packaged in a sub‐microporous alginate to minimize the potential risk of bacteria leakage. Upon the introduction of water, the paper‐based MFC generates a significantly enhanced power density of 140 µW cm−2, which is more than two orders of magnitude greater than their previously reported counterparts. Six MFCs connected in series generate more than sufficient power to run an on‐chip, light‐emitting diode.
more »
« less
- Award ID(s):
- 2246975
- PAR ID:
- 10640755
- Publisher / Repository:
- Wiley Blackwell (John Wiley & Sons)
- Date Published:
- Journal Name:
- Advanced Sustainable Systems
- Volume:
- 8
- Issue:
- 2
- ISSN:
- 2366-7486
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Microbial fuel cells (MFCs) that generate electricity generation from a broad diversity of biomass and organic substrates through microbial metabolism have attracted considerable research interest as an alternative clean energy technology and energy‐efficient wastewater treatment method. Despite encouraging successes and auspicious pilot‐scale experiments of the MFCs, increasing doubts about their viability for practical large‐scale applications are being raised. Low performance, expensive core parts and materials, energy‐intensive operation, and scaling bottlenecks question a sustainable development. Instead, special MFCs for low‐power battery‐reliant devices might be more applicable and potentially realizable. Such bacteria‐powered biobatteries would enable i) a truly stand‐alone device platform suitable for use in resource‐limited and remote regions, ii) simple, on‐demand power generation within a programmed period of time, and iii) a tracelessly biodegradable battery due to the use of the bacteria used for power generation. The biobattery would be an excellent power solution for small‐scale, on‐demand, single‐use, and disposable electronics. Recent progress of small‐scale MFC‐based biobatteries is critically reviewed with specific attention toward various device platforms. Furthermore, comments and outlook related to the potential directions and challenges of the biobatteries are discussed to offer inspiration to the community and induce fruitful future research.more » « less
-
Abstract Thermoelectric generators are an environmentally friendly and reliable solid‐state energy conversion technology. Flexible and low‐cost thermoelectric generators are especially suited to power flexible electronics and sensors using body heat or other ambient heat sources. Bismuth telluride (Bi2Te3) based thermoelectric materials exhibit their best performance near room temperature making them an ideal candidate to power wearable electronics and sensors using body heat. In this report, Bi2Te3thin films are deposited on a flexible polyimide substrate using low‐cost and scalable manufacturing methods. The synthesized Bi2Te3nanocrystals have a thickness of 35 ± 15 nm and a lateral dimension of 692 ± 186 nm. Thin films fabricated from these nanocrystals exhibit a peak power factor of 0.35 mW m−1·K−2at 433 K, which is among the highest reported values for flexible thermoelectric films. In order to evaluate the flexibility of the thin films, static and dynamic bending tests are performed while monitoring the change in electrical resistivity. After 1000 bending cycles over a 50 mm radius of curvature, the change in electrical resistance of the film is 23%. Using Bi2Te3solutions, the ability to print thermoelectric thin films with an aerosol jet printer is demonstrated, highlighting the potential of additive manufacturing techniques for fabricating flexible thermoelectric generators.more » « less
-
We demonstrate the first example of a wearable self-charging power system that offers (i) the high-energy harvesting function of a microbial fuel cell (MFC) and (ii) the high-power operation of a supercapacitor through charging and discharging. The MFC uses human skin bacteria as a biocatalyst to transform the chemical energy of human sweat into electrical power through bacterial metabolism, while the integrated supercapacitor stores the generated electricity for constant and high-pulse power generation even with the irregular perspiration of individuals. The all-printed paper-based power system integrates the horizontally structured MFC and the planar supercapacitor, representing the most favorable platform for wearable applications because of its lightweight and easy integrability into other wearable devices. The self-charging wearable system attains higher electrical power and longer-term operational capability, demonstrating considerable potential as a power source for wearable electronics.more » « less
-
Abstract Microelectronic thermoelectric generators are one potential solution to energizing energy autonomous electronics, such as internet-of-things sensors, that must carry their own power source. However, thermoelectric generators with the mm2footprint area necessary for on-chip integration made from high thermoelectric figure-of-merit materials have been unable to produce the voltage and power levels required to run Si electronics using common temperature differences. We present microelectronic thermoelectric generators using Si0.97Ge0.03, made by standard Si processing, with high voltage and power generation densities that are comparable to or better than generators using high figure-of-merit materials. These Si-based thermoelectric generators have <1 mm2areas and can energize off-the-shelf sensor integrated circuits using temperature differences ≤25 K near room temperature. These generators can be directly integrated with Si circuits and scaled up in area to generate voltages and powers competitive with existing thermoelectric technologies, but in what should be a far more cost-effective manner.more » « less
