An official website of the United States government
Abstract CUORE Upgrade with Particle IDentification (CUPID) is a foreseen ton-scale array of Li 2 MoO 4 (LMO) cryogenic calorimeters with double readout of heat and light signals. Its scientific goal is to fully explore the inverted hierarchy of neutrino masses in the search for neutrinoless double beta decay of 100 Mo. Pile-up of standard double beta decay of the candidate isotope is a relevant background. We generate pile-up heat events via injection of Joule heater pulses with a programmable waveform generator in a small array of LMO crystals operated underground in the Laboratori Nazionali del Gran Sasso, Italy. This allows to label pile-up pulses and control both time difference and underlying amplitudes of individual heat pulses in the data. We present the performance of supervised learning classifiers on data and the attained pile-up rejection efficiency.
more »
« less
First demonstration of a TES based cryogenic Li₂¹⁰⁰MoO₄ detector for neutrinoless double beta decay search
Cryogenic calorimetric experiments to search for neutrinoless double-beta decay (0νββ) are highly competitive, scalable, and versatile in isotope choice. The largest planned detector array, CUPID, consists of about 1500 individual Li₂¹⁰⁰MoO₄ detector modules, with further scaling envisioned for a follow-up experiment (CUPID-1T). In this article, we present a novel detector concept targeting this second stage, using a low-impedance TES-based readout for the Li₂MoO₄ absorber. This design is easily mass-produced and supports multiplexed readout. We describe the detector design and results from a first prototype operated at the NEXUS shallow underground facility at Fermilab. The detector is a 2-cm-side cube with a mass of 21 g, strongly thermally coupled to its readout chip, allowing rise-times of approximately 0.5 ms. This is more than an order of magnitude faster than current NTD-based detectors and is expected to effectively mitigate backgrounds caused by pile-up of two independent two-neutrino decay events occurring close in time. With a baseline resolution of 1.95 keV (FWHM), these performance parameters extrapolate to a background index from pile-up as low as 5 × 10⁻⁶ counts/keV/kg/year in CUPID-sized crystals. The detector was calibrated up to the MeV region, demonstrating sufficient dynamic range for 0νββ searches. In combination with a SuperCDMS HVeV detector, this setup also enabled a precision measurement of the scintillation time constants of Li₂MoO₄, revealing a primary component with a fast ~20 μs time scale.
more »
« less
- Award ID(s):
- 2209585
- PAR ID:
- 10641727
- Author(s) / Creator(s):
- ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; ; more »
- Publisher / Repository:
- Springer Nature Link
- Date Published:
- Journal Name:
- The European Physical Journal C
- Volume:
- 85
- Issue:
- 2
- ISSN:
- 1434-6052
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract CUPID will be a next generation experiment searching for the neutrinoless double $$\beta $$ β decay, whose discovery would establish the Majorana nature of the neutrino. Based on the experience achieved with the CUORE experiment, presently taking data at LNGS, CUPID aims to reach a background free environment by means of scintillating Li $$_{2}$$ 2 $$^{100}$$ 100 MoO $$_4$$ 4 crystals coupled to light detectors. Indeed, the simultaneous heat and light detection allows us to reject the dominant background of $$\alpha $$ α particles, as proven by the CUPID-0 and CUPID-Mo demonstrators. In this work we present the results of the first test of the CUPID baseline module. In particular, we propose a new optimized detector structure and light sensors design to enhance the engineering and the light collection, respectively. We characterized the heat detectors, achieving an energy resolution of (5.9 ± 0.2) keV FWHM at the Q -value of $$^{100}$$ 100 Mo (about 3034 keV). We studied the light collection of the baseline CUPID design with respect to an alternative configuration which features gravity-assisted light detectors’ mounting. In both cases we obtained an improvement in the light collection with respect to past measures and we validated the particle identification capability of the detector, which ensures an $$\alpha $$ α particle rejection higher than 99.9%, fully satisfying the requirements for CUPID.more » « less
-
Abstract CUPID is a next-generation bolometric experiment aiming at searching for neutrinoless double-beta decay with ∼250 kg of isotopic mass of 100 Mo. It will operate at ∼10 mK in a cryostat currently hosting a similar-scale bolometric array for the CUORE experiment at the Gran Sasso National Laboratory (Italy). CUPID will be based on large-volume scintillating bolometers consisting of 100 Mo-enriched Li 2 MoO 4 crystals, facing thin Ge-wafer-based bolometric light detectors. In the CUPID design, the detector structure is novel and needs to be validated. In particular, the CUORE cryostat presents a high level of mechanical vibrations due to the use of pulse tubes and the effect of vibrations on the detector performance must be investigated. In this paper we report the first test of the CUPID-design bolometric light detectors with NTD-Ge sensors in a dilution refrigerator equipped with a pulse tube in an above-ground lab. Light detectors are characterized in terms of sensitivity, energy resolution, pulse time constants, and noise power spectrum. Despite the challenging noisy environment due to pulse-tube-induced vibrations, we demonstrate that all the four tested light detectors comply with the CUPID goal in terms of intrinsic energy resolution of 100 eV RMS baseline noise. Indeed, we have measured 70–90 eV RMS for the four devices, which show an excellent reproducibility. We have also obtained high energy resolutions at the 356 keV line from a 133 Ba source, as good as Ge semiconductor γ detectors in this energy range.more » « less
-
Abstract The EXO-200 experiment searched for neutrinoless double-beta decay of 136 Xe with a single-phase liquid xenon detector. It used an active mass of 110 kg of 80.6%-enriched liquid xenon in an ultra-low background time projection chamber with ionization and scintillation detection and readout. This paper describes the design and performance of the various support systems necessary for detector operation, including cryogenics, xenon handling, and controls. Novel features of the system were driven by the need to protect the thin-walled detector chamber containing the liquid xenon, to achieve high chemical purity of the Xe, and to maintain thermal uniformity across the detector.more » « less
-
Abstract We report on the preparation of and calibration measurements with a 83 mKr source for the CENNS-10 liquid argon detector. 83 mKr atoms generated in the decay of a 83 Rb source were introduced into the detector via injection into the Ar circulation loop. Scintillation light arising from the 9.4 keV and 32.1 keV conversion electrons in the decay of 83 mKr in the detector volume were then observed. This calibration source allows the characterization of the low-energy response of the CENNS-10 detector and is applicable to other low-energy-threshold detectors. The energy resolution of the detector was measured to be 9% at the total 83 mKr decay energy of 41.5 keV. We performed an analysis to separately calibrate the detector using the two conversion electrons at 9.4 keV and 32.1 keV.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1140/epjc/s10052-025-13844-4
