An official website of the United States government
Abstract Liquid crystalline elastomers (LCEs) that retain the cholesteric phase (CLCEs) are soft, polymeric materials that retain periodic structure and exhibit a selective reflection. While prior studies have examined thermochromism in CLCEs, the association of temperature change and reflection wavelength shift has been limited to 1.4 nm °C−1. Here, CLCEs with intra‐mesogenic supramolecular bonds are prepared to enhance tunability as well triple the rate (e.g., 4.8 nm °C−1). Specifically, these materials incorporate liquid crystalline monomers based on dimerized oxy‐benzoic acid (OBA) derivatives. Increasing the concentration of the OBA comonomers increases the magnitude of red‐shifting thermochromism of the selective reflection. At and above a threshold concentration, the selective reflection in the CLCEs can disappear upon heating, analogous to on‐off “switching.” Further, the introduction of the supramolecular bonds within the CLCE enable mechanical programming and enhanced one‐time tunable thermochromism via a one‐way shape memory process. Accordingly, this research could enable functional use in low temperature sensitive optical elements, fail‐safe thermal indicators for food packaging, and smart window coatings.
more »
« less
This content will become publicly available on December 27, 2025
Dynamic Infrared Reflective Filters Prepared from Cholesteric Liquid Crystalline Elastomers
Cholesteric liquid crystalline elastomers (CLCEs) exhibit selective reflection due to a periodic variation of the refractive index throughout the thickness of the material. CLCEs can be formulated and prepared to reflect light in the UV, visible, and infrared regions of the electromagnetic spectrum by simply adjusting the concentration of the chiral species. This report details the synthesis and preparation of appropriately thick CLCEs that maximize reflection in both the short-wave and mid-wave infrared (SWIR, MWIR) regions of the electromagnetic spectrum. As elastomers, fully solid CLCEs can be mechanically deformed to tune the selective reflection. This report details approaches to tune selective reflection, including mechanical deformation, incidence angle, thermochromism, and dielectric actuation. Generally, the optomechanical response of the CLCE at longer pitch lengths (e.g., infrared reflecting) is comparatively less than that of prior examinations of analogous compositions with a shorter pitch. Furthermore, the contribution of modulus and dielectric breakdown to electromechanical response is examined.
more »
« less
- Award ID(s):
- 2105369
- PAR ID:
- 10642805
- Publisher / Repository:
- American Chemical Society
- Date Published:
- Journal Name:
- ACS Applied Optical Materials
- Volume:
- 2
- Issue:
- 12
- ISSN:
- 2771-9855
- Page Range / eLocation ID:
- 2559 to 2567
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The electrically‐directed, isothermal response of liquid crystal elastomers (LCEs) to an applied electric field is a compelling approach to realize spatially tailorable, sequence‐controllable, and high‐frequency deformation. The electromechanical response is facilitated by coating aligned LCEs with compliant electrodes. Upon application of an electric field, the electrodes attract and generate Maxwell stress. The directional difference in moduli for aligned LCEs produces directional deformation of the material and does not require mechanical bias or framing. Here, LCEs prepared from a newly reported thiol‐ene reaction are explored as DEAs with improved mechanical and dielectric properties. This report details that incorporating a difunctional liquid crystalline monomer composed of allyl ether functional groups reduces Young's modulus, increases the dielectric constant, and improves cyclic recovery compared to an analogous LCE prepared by thiol‐ene polymerization. Electrically‐induced, isothermal deformation of as much as 30% strain is reported. The facile chemistry and enhanced electromechanical response reported here may enable the functional integration of LCEs in applications such as robotics.more » « less
-
Polyurea elastomers are utilized for a myriad of applications ranging from coatings and foams to dielectric materials for capacitors and actuators. However, current synthetic methods for polyureas rely on highly reactive isocyanates, solvents, and catalysts, which collectively pose serious safety considerations. This report details the synthesis and characterization of melt processible, poly(tetramethylene oxide) (PTMO)-based segmented polyurea elastomers utilizing an isocyanate-, solvent-, and catalyst-free approach. Dynamic mechanical analysis and differential scanning calorimetry suggested microphase separation between the hard and soft segments. Tensile analysis revealed high strain at break for all segmented copolymers between 340 and 770%, and tunable modulus between 0.76 and 29.5 MPa. Dielectric spectroscopy revealed that the composition containing 20 wt% hard segment offered the highest permittivity at 10.6 (1 kHz, 300 K) of the segmented copolymers, indicating potential as a dielectric elastomer.more » « less
-
Cholesteric liquid crystals (CLCs) exhibit Bragg reflection due to their spontaneous self-assembly into a one-dimensional photonic structure. Retaining this cholesteric order in a polymer network requires functionalizing liquid crystals with reactive end groups. However, conventional chemistries for synthesizing cholesteric liquid crystalline polymers often result in poor surface alignment and reduced optical quality. In this work, we investigate a thiol−ene step-growth polymerization approach to fabricate cholesteric liquid crystalline elastomers (CLCEs) with tunable mechanical properties and improved optical quality. By varying the cross-link density, we systematically study the effects on haze, cross-linking degree, and mechanical response. Compared to existing cholesteric liquid crystalline polymers, the thiol−ene-based CLCEs exhibit enhanced surface alignment, reduced haze, and greater mechanical tunability. These materials are further benchmarked against CLCEs synthesized via thiol−acrylate chain transfer polymerization, highlighting the advantages of the thiol−ene reaction for achieving precisely controlled properties in cholesteric polymer networks.more » « less
-
Abstract The far‐infrared (far‐IR) remains a relatively underexplored region of the electromagnetic spectrum extending roughly from 20 to 100 µm in free‐space wavelength. Research within this range has been restricted due to a lack of optical materials that can be optimized to reduce losses and increase sensitivity, as well as by the long free‐space wavelengths associated with this spectral region. Here the exceptionally broad Reststrahlen bands of two Hf‐based transition metal dichalcogenides (TMDs) that can support surface phonon polaritons (SPhPs) within the mid‐infrared (mid‐IR) into the terahertz (THz) are reported. In this vein, the IR transmission and reflectance spectra of hafnium disulfide (HfS2) and hafnium diselenide (HfSe2) flakes are measured and their corresponding dielectric functions are extracted. These exceptionally broad Reststrahlen bands (HfS2: 165 cm−1; HfSe2: 95 cm−1) dramatically exceed that of the more commonly explored molybdenum‐ (Mo) and tungsten‐ (W) based TMDs (≈5–10 cm−1), which results from the over sevenfold increase in the Born effective charge of the Hf‐containing compounds. This work therefore identifies a class of materials for nanophotonic and sensing applications in the mid‐ to far‐IR, such as deeply sub‐diffractional hyperbolic and polaritonic optical antennas, as is predicted via electromagnetic simulations using the extracted dielectric function.more » « less
