skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


  • NSF Public Access
  • Search Results
  • Identification and analysis of ground surface rupture patterns from thrust and reverse fault earthquakes using geomechanical models
Title: Identification and analysis of ground surface rupture patterns from thrust and reverse fault earthquakes using geomechanical models
We define the physical processes that control the style and distribution of ground surface ruptures on thrust and reverse faults during large magnitude earthquakes through an expansive suite of geomechanical models developed with the distinct element method (DEM). Our models are based on insights from analog sandbox fault experiments as well as coseismic ground surface ruptures in historic earthquakes. DEM effectively models the geologic processes of faulting at depth in cohesive rocks, as well as the granular mechanics of soil and sediment deformation in the shallow subsurface. We developed an initial suite of 45 2D DEM experiments on dense, 5.0 m thick sediment in a model 50 m wide with a fault positioned 20 m from the driving wall and slipped each model at a constant rate (0.3 m/s) from 0 to 5.0 m. We evaluated a range of homogeneous sediment mechanics (cohesion and tensile strength from 0.1 to 2.0 MPa) across a range of fault dip angles. In addition, we examined various depths of sediment above the fault tip. Based on these experiments, we developed a classification system of the observed fault scarp morphology including three main types (monoclinal, pressure ridge, and simple scarps), each of which can be subsequently modified by hanging wall collapse. After this initial suite of models, we generated an additional 2,981 experiments of homogeneous and heterogeneous sediment in dense, medium-dense, and loosely packed sediment across a wide range of sediment depths and mechanics, as well as a range of fault dips (20 – 70º). These models provide robust statistical relationships between model parameters such as the fault dip and sediment strength mechanics with the observed surface deformation characteristics, including scarp height, width, and dip as well as the tendency for secondary fault splays. These relationships are supported by natural rupture patterns from recent and paleo-earthquakes across a range of geologic settings. In conjunction with these natural examples, our models provide a basis to more accurately forecast ground surface deformation characteristics that will result from future earthquakes based on limited information about the earthquake source and local sediment properties.  more » « less
Award ID(s):
2207119
PAR ID:
10644516
Author(s) / Creator(s):
; ; ;
Publisher / Repository:
Japanese Geotechnical Society Special Publication
Date Published:
Journal Name:
Japanese Geotechnical Society Special Publication
Volume:
10
Issue:
26
ISSN:
2188-8027
Page Range / eLocation ID:
978 to 983
Subject(s) / Keyword(s):
distinct element method, surface fault rupture, fault scarps, tectonic geomorphology, numerical modeling
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Bulletin of the Seismological Society of America)
    ABSTRACT We seek to improve our understanding of the physical processes that control the style, distribution, and intensity of ground surface ruptures on thrust and reverse faults during large earthquakes. Our study combines insights from coseismic ground surface ruptures in historic earthquakes and patterns of deformation in analog sandbox fault experiments to inform the development of a suite of geomechanical models based on the distinct element method (DEM). We explore how model parameters related to fault geometry and sediment properties control ground deformation characteristics such as scarp height, width, dip, and patterns of secondary folding and fracturing. DEM is well suited to this investigation because it can effectively model the geologic processes of faulting at depth in cohesive rocks, as well as the granular mechanics of soil and sediment deformation in the shallow subsurface. Our results show that localized fault scarps are most prominent in cases with strong sediment on steeply dipping faults, whereas broader deformation is prominent in weaker sediment on shallowly dipping faults. Based on insights from 45 experiments, the key parameters that influence scarp morphology include the amount of accumulated slip on a fault, the fault dip, and the sediment strength. We propose a fault scarp classification system that describes the general patterns of surface deformation observed in natural settings and reproduced in our models, including monoclinal, pressure ridge, and simple scarps. Each fault scarp type is often modified by hanging-wall collapse. These results can help to guide both deterministic and probabilistic assessment in fault displacement hazard analysis. 
    more » « less
  2. ; ; (, Seismological Research Letters)
    Abstract This study examines how fault dip and sediment strength influence along-strike variability in patterns of ground surface deformation during thrust and reverse fault earthquakes. Expanding on the 2D distinct element method (DEM) analysis by Chiama et al. (2023) and Chiama, Bednarz, et al. (2025), we develop 3D DEM models to investigate the influence of along-strike variability of geological site parameters on resultant morphologies of coseismic ruptures. The main fault scarp types—monoclinal, pressure ridge, and simple—are successfully reproduced in these 3D models, aligning with surface rupture characteristics previously identified in 2D modeling. Uniform fault dips and homogeneous sediment properties produce symmetrical (or cylindrical) fault scarps with uniform scarp morphologies, whereas local variations in fault dip, sediment strengths, and sediment thickness above the fault tip form a range of scarp geometries, deformation zone widths, and patterns of secondary fracturing. These 3D DEM models reproduce patterns of surface fault ruptures observed in natural settings. Overall, the 3D models support the relationships of ground surface deformation characteristics (scarp class, width, and height) with source and sediment properties established in the 2D DEM results of Chiama, Bednarz, et al. (2025). In addition, they provide new insights into how fault dip and sediment strength govern along-strike transitions in fault scarp morphology. In combination, the results of the 2D and 3D DEM model results can be used to infer patterns of surface ruptures based on local geological site conditions and fault characteristics. 
    more » « less
  3. ; ; ; ; (, Earthquake Spectra)
    We investigate the influence of earthquake source characteristics and geological site parameters on fault scarp morphologies for thrust and reverse fault earthquakes using geomechanical models. A total of 3434 distinct element method (DEM) model experiments were performed to evaluate the impact of the sediment depth, density, homogeneous and heterogeneous sediment strengths, fault dip, and the thickness of unruptured sediment above the fault tip on the resultant coseismic ground surface deformation for a thrust or reverse fault earthquake. A machine learning model based on computer vision (CV) was applied to obtain measurements of ground surface deformation characteristics (scarp height, uplift, deformation zone width, and scarp dip) from a total of 346,834 DEM model stages taken every 0.05 m of slip. The DEM dataset exhibits a broad range of scarp behaviors, generating monoclinal, pressure ridge, and simple scarps—each of which can be modified by hanging wall collapse. The parameters that had the most influence on surface rupture patterns are fault displacement, fault dip, sediment depth, and sediment strength. The DEM results comprehensively describe the range of historic surface rupture observations in the Fault Displacement Hazards Initiative (FDHI) dataset with improved relationships obtained by incorporating additional information about the earthquake size, fault geometry, and surface deformation style. We suggest that this DEM dataset can be used to supplement field data and help forecast patterns of ground surface deformation in future earthquakes given specific anticipated source and site characteristics. 
    more » « less
  4. ; ; (, Designsafe-CI)
    These 3D DEM models of thrust and reverse fault ruptures explore the influence of a variable fault dip (20º to 70º in 1º increments along-strike) in homogeneous (weak, moderate, strong) sediment as well as heterogeneous sediment (cohesive top unit, randomized sediment strengths). 
    more » « less
  5. ; ; ; ; (, Designsafe-CI)
    Each DEM experiment is sorted into directories by model parameters: D, M, L = Dense, Medium, and Loose sediment; 3, 5, and 10 m sediment depths; cohesion and tensile strength in Pa; fault dip in degrees; FS = fault seed height as a product of the total sediment depth. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Save / Share this Record
  • Send to Email