An official website of the United States government
Poly(lactic acid) is the most successful biodegradable synthetic polymer. Yet, its physical properties need to be improved to replace petrochemical polymers or to serve emerging applications. Sequence-selective copolymerization of lactide with lactones can provide more versatile polyesters, but ideal alternating selectivity remains elusive. We report binucleated dizinc catalysts that show exceptional alternating selectivity in this reaction. Metalation of binucleating bis(pyrazolyl)alkanes (PDRH) gives neutral complexes PDRZn2X3 (X− = Cl−, Br−, I−) with two distinct zinc sites. Anion metathesis gives μ-phenolate cationic complexes [PDRZn2X2]+. The neutral iodide complexes PDRZn2I3 polymerize lactide with moderate dispersity (Đ = 1.18−1.38). Monozinc analogs give much lower activity, implicating a cooperative polymerization. End-group analysis and active site interrogation are consistent with coordination insertion polymerization by a dialkoxide complex. Based on model dizinc alkoxides, in situ NMR analysis, and DFT modeling, we provide a plausible active site structure and mechanistic rationale for cooperativity. We obtained copolymers of lactide and ε-caprolactone showing the highest degree of alternation obtained with a main group catalyst. Mechanistic analysis implicates transesterification with unusual alternating selectivity. We also obtained copolymers with γ-butyrolactone, δ-valerolactone, and glycolide. This report also represents a rare use of bimetallic catalysts to obtain new selectivity in lactide polymerization.
more »
« less
This content will become publicly available on November 17, 2026
Anionic Polymerization of o -Phthalaldehyde and rac -Lactide by Discrete, Binucleated Dilithium μ-Amide Catalysts
Anionic polymerization with alkali metals represents one of the most commercially significant and synthetically versatile polymerization methods. However, structural analysis of active alkali metal polymerization catalysts is complicated by aggregation and multicenter reactivity. This work describes discrete dilithium complexes for the anionic polymerization of rac-lactide and o-phthalaldehyde. The reaction of binucleating bis(pyrazolyl)alkane ligands PDRH with two equivalents of LiHMDS (HMDS− = −N(SiMe3)2) gives complexes PDRLi2(HMDS) with a symmetric μ-amide structure, analogous to simple alkali amides. These complexes polymerize rac-lactide by a mechanism analogous to LiHMDS. Notably, PD4‐MeLi2(HMDS) gives lower dispersity and better molecular weight control than LiHMDS, consistent with a more well-defined catalyst. In the polymerization of o-phthalaldehyde, PDHLi2(HMDS) and PD4‐MeLi2(HMDS) give higher activity and higher selectivity than LiHMDS or butyllithium, commonly used initiators for this reaction, and also give modest stereoselectivity. Our detailed computational analysis of o-phthalaldehyde insertion resulted in a highly cooperative mechanism, with μ-alkoxide bridging of the two metals in the resting state and with back-coordination of the furanyl oxygen. Aldehyde insertion occurs through synchronous nucleophilic addition and migration of the chain end alkoxide, not by aldehyde coordination and insertion. This detailed picture of polymerization by a lithium catalyst will inform mechanistic analysis and catalyst design in anionic polymerization.
more »
« less
- Award ID(s):
- 2337696
- PAR ID:
- 10648341
- Publisher / Repository:
- American Chemical Society
- Date Published:
- Journal Name:
- Inorganic Chemistry
- ISSN:
- 0020-1669
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Dinuclear manganese hydride complexes of the form [Mn2(CO)8(μ‐H)(μ‐PR2)] (R=Ph,1; R=iPr,2) were used inE‐selective alkyne semi‐hydrogenation (E‐SASH) catalysis. Catalyst speciation studies revealed rich coordination chemistry and the complexes thus formed were isolated and in turn tested as catalysts; the results underscore the importance of dinuclearity in engendering the observedE‐selectivity and provide insights into the nature of the active catalyst. The insertion product obtained from treating2with (cyclopropylethynyl)benzene contains acis‐alkenyl bridging ligand with the cyclopropyl ring being intact. Treatment of this complex with H2affords exclusivelytrans‐(2‐cyclopropylvinyl)benzene. These results, in addition to other control experiments, indicate a non‐radical mechanism forE‐SASH, which is highly unusual for Mn−H catalysts. The catalytically active species are virtually inactive towardscistotransalkene isomerization indicating that theE‐selective process is intrinsic and dinuclear complexes play a critical role. A reaction mechanism is proposed accounting for the observed reactivity which is fully consistent with a kinetic analysis of the rate limiting step and is further supported by DFT computations.more » « less
-
Although N-heterocyclic carbenes (NHCs) have been known as ligands for organometallic complexes since the 1960s, these carbenes did not attract considerable attention until Arduengo et al. reported the isolation of a metal-free imidazol-2-ylidene in 1991. In 2001 Crabtree et al. reported a few complexes featuring an NHC isomer, namely an imidazol-5-ylidene, also termed abnormal NHC (aNHCs). In 2009, it was shown that providing to protect the C-2 position of an imidazolium salt, the deprotonation occurred at the C-5 position, affording imidazol-5-ylidenes that could be isolated. Over the last ten years, stable aNHCs have been used for designing a range of catalysts employing Pd( ii ), Cu( i ), Ni( ii ), Fe(0), Zn( ii ), Ag( i ), and Au( i / iii ) metal based precursors. These catalysts were utilized for different organic transformations such as the Suzuki–Miyaura cross-coupling reaction, C–H bond activation, dehydrogenative coupling, Huisgen 1,3-dipolar cycloaddition (click reaction), hydroheteroarylation, hydrosilylation reaction and migratory insertion of carbenes. Main-group metal complexes were also synthesized, including K( i ), Al( iii ), Zn( ii ), Sn( ii ), Ge( ii ), and Si( ii / iv ). Among them, K( i ), Al( iii ), and Zn( ii ) complexes were used for the polymerization of caprolactone and rac -lactide at room temperature. In addition, based on the superior nucleophilicity of aNHCs, relative to that of their nNHCs isomers, they were used for small molecules activation, such as carbon dioxide (CO 2 ), nitrous oxide (N 2 O), tetrahydrofuran (THF), tetrahydrothiophene and 9-borabicyclo[3.3.1]nonane (9BBN). aNHCs have also been shown to be efficient metal-free catalysts for ring opening polymerization of different cyclic esters at room temperature; they are among the most active metal-free catalysts for ε-caprolactone polymerization. Recently, aNHCs successfully accomplished the metal-free catalytic formylation of amides using CO 2 and the catalytic reduction of carbon dioxide, including atmospheric CO 2 , into methanol, under ambient conditions. Although other transition metal complexes featuring aNHCs as ligand have been prepared and used in catalysis, this review article summarize the results obtained with the isolated aNHCs.more » « less
-
Synthesis of a new mononuclear magnesium complex with a bulky bis(alkoxide) ligand environment and its reactivity in ring-opening polymerization (ROP) and ring-opening copolymerization (ROCOP) are reported. Reaction of n -butyl- sec -butylmagnesium with two equivalents of HOR (HOR = di- tert -butylphenylmethanol, HOC t Bu 2 Ph) formed Mg(OR) 2 (THF) 2 . The reaction proceeded via the Mg(OR)( sec -Bu)(THF) 2 intermediate that was independently synthesized by treating n -butyl- sec -butylmagnesium with one equivalent of HOR. Mg(OR) 2 (THF) 2 led to active albeit not well-controlled ROP of rac -lactide. In contrast, well-controlled ROCOP of epoxides with cyclic anhydrides was observed, including efficient and alternating copolymerization of phthalic anhydride with cyclohexene oxide as well as rare copolymerization of phthalic anhydride with limonene oxide and terpolymerization of phthalic anhydride with both cyclohexene oxide and limonene oxide. In addition, novel copolymerization of dihydrocoumarin with limonene oxide is described.more » « less
-
Investigation of Cu–O 2 oxidation reactivity is important in biological and anthropogenic chemistry. Zeolites are one of the most promising Cu/O based oxidation catalysts for development of industrial-scale CH 4 to CH 3 OH conversion. Their oxidation mechanisms are not well understood, however, highlighting the importance of the investigation of molecular Cu( i )–O 2 reactivity with O-donor complexes. Herein, we give an overview of the synthesis, structural properties, and O 2 reactivity of three different series of O-donor fluorinated Cu( i ) alkoxides: K[Cu(OR) 2 ], [(Ph 3 P)Cu(μ-OR) 2 Cu(PPh 3 )], and K[(R 3 P)Cu(pin F )], in which OR = fluorinated monodentate alkoxide ligands and pin F = perfluoropinacolate. This breadth allowed for the exploration of the influence of the denticity of the ligand, coordination number, the presence of phosphine, and K⋯F/O interactions on their O 2 reactivity. K⋯F/O interactions were required to activate O 2 in the monodentate-ligand-only family, whereas these connections did not affect O 2 activation in the bidentate complexes, potentially due to the presence of phosphine. Both families formed trisanionic, trinuclear cores of the form {Cu 3 (μ 3 -O) 2 } 3− . Intramolecular and intermolecular substrate oxidation were also explored and found to be influenced by the fluorinated ligand. Namely, {Cu 3 (μ 3 -O) 2 } 3− from K[Cu(OR) 2 ] could perform both monooxygenase reactivity and oxidase catalysis, whereas those from K[(R 3 P)Cu(pin F )] could only perform oxidase catalysis.more » « less
