An official website of the United States government
{"Abstract":["Rock magnetic data from IODP Exp. 382 Sites U1537 and U1538 to support Reilly et al. "A geochemical mechanism for >10 m offsets of magnetic reversals inferred from the comparison of two Scotia Sea drill sites"\nExcel Files:\n\nU1537_CubeSummary_Zenodo.xlsx : Summary of NRM, ARM, IRM, and magnetic susceptibility investigations on U1537 cube samples\nU1538_CubeSummary_Zenodo.xlsx : Summary of NRM, ARM, IRM, and magnetic susceptibility investigations on U1538 cube samples\nZip Files:\n\nFORC_Data.zip : First order reversal curve data files in MicroMag format for samples discussed in paper\nDCD_Data.zip : DC Demagnetization curve data files for samples discussed in paper\nHysteresis_Data.zip : Hysteresis Loops for samples discussed in paper\nMPMS_Data.zip : Data collected on Magnetics Property Measurement System 3, including Field Cooled/Zero Field Cooled Curves, Low Temperature Cycling of Room Temperature IRM, and AC Susceptibility\n \nNRM = Natural Remanent Magnetization; ARM = Anhysteretic Remanent Magnetization; IRM = Isothermal Remanent Magnetization"]}
more »
« less
IODP Site U1537 1.7-3.3 Ma Rock Magnetic Data (FC, ZFC, LTC-RTSIRM, Hysteresis, DCD, FORCs)
Data files for rock magnetic data collected on discrete samples at the Institute for Rock Magnetism, University of Minnesota on a Quantum Designs Magnetic Properties System 3 (MPMS3) and Lakeshore Model 8600 Vibrating Sample Magnetometer (VSM). Data include Field Cooled (FC), Zero Field Cooled (ZFC), and Low Temperature Cycling of Room Temperature Saturation Isothermal Remanent Magnetization (LTC-RTSIRM) curves measured on the MPMS and Hysteresis Loops, Direct Current Demagnetization Curves, and Hysteresis Loops collected on the VSM.
more »
« less
- PAR ID:
- 10651245
- Publisher / Repository:
- Zenodo
- Date Published:
- Subject(s) / Keyword(s):
- IODP International Ocean Discovery Program Expedition 382 Site U1537 Scotia Sea Dove Basin Marine Sediments Southern Ocean Antarctica Rock Magnetism First Order Reversal Curves (FORCs) Hysteresis Loop DC Demagnetization Curve Zero Field Cooled Curve Field Cooled Curve Low Temperature Cycling of Room Temperature Saturation Isothermal Remanent Magnetization (LTC-RTSIRM) FC-ZFC
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
We measured the natural remanent magnetization (NRM) and rock magnetic properties of 57 sediment samples and 38 basalt samples from Tūranganui Knoll on the Hikurangi Plateau collected at Site U1526 during International Ocean Discovery Program Expedition 375. NRM was measured on all samples before and after either progressive alternating field or thermal demagnetization. Principal component analysis was conducted to provide estimates of the characteristic remanent magnetization direction. Rock magnetic observations include measurements on select samples of the bulk magnetic susceptibility, susceptibility versus heating for Curie temperature assessment, magnetic hysteresis, backfield for coercivity of remanence determinations, isothermal remanent magnetization, and first-order reversal curves.more » « less
-
SUMMARY Anisotropy of remanent magnetization and magnetic susceptibility are highly sensitive and important indicators of geological processes which are largely controlled by mineralogical parameters of the ferrimagnetic fraction in rocks. To provide new physical insight into the complex interaction between magnetization structure, shape, and crystallographic relations, we here analyse ‘slice-and-view’ focused-ion-beam (FIB) nano-tomography data with micromagnetic modelling and single crystal hysteresis measurements. The data sets consist of 68 magnetite inclusions in orthopyroxene (Mg60) and 234 magnetite inclusions in plagioclase (An63) were obtained on mineral separates from the Rustenburg Layered Suite of the Bushveld Intrusive Complex, South Africa. Electron backscatter diffraction was used to determine the orientation of the magnetite inclusions relative to the crystallographic directions of their silicate hosts. Hysteresis loops were calculated using the finite-element micromagnetics code MERRILL for each particle in 20 equidistributed field directions and compared with corresponding hysteresis loops measured using a vibrating sample magnetometer (VSM) on silicate mineral separates from the same samples. In plagioclase the ratio of remanent magnetization to saturation magnetization (Mrs/Ms) for both model and measurement agree within 1.0 per cent, whereas the coercivity (Hc) of the average modelled curve is 20 mT lower than the measured value of 60 mT indicating the presence of additional sources of high coercivity in the bulk sample. The VSM hysteresis measurements of the orthopyroxene were dominated by multidomain (MD) magnetite, whereas the FIB location was chosen to avoid MD particles and thus contains only particles with diameters <500 nm that are considered to be the most important carriers of palaeomagnetic remanence. To correct for this sampling bias, measured MD hysteresis loops from synthetic and natural magnetites were combined with the average hysteresis loop from the MERRILL models of the FIB region. The result shows that while the modelled small-particle fraction only explains 6 per cent of the best fit to the measured VSM hysteresis loop, it contributes 28 per cent of the remanent magnetization. The modelled direction of maximal Mrs/Ms in plagioclase is subparallel to [001]plag, whereas Hc does not show a strong orientation dependence. The easy axis of magnetic remanence is in the direction of the magnetite population normal to (150)plag and the maximum calculated susceptibility (χ*) is parallel to [010]plag. For orthopyroxene, the maximum Mrs/Ms, maximum χ* and the easy axis of remanence is strongly correlated to the elongation axes of magnetite in the [001]opx direction. The maximum Hc is oriented along [100]opx and parallel to the minimum χ*, which reflects larger vortex nucleation fields when the applied field direction approaches the short axis. The maximum Hc is therefore orthogonal to the maximum Mrs/Ms, controlled by axis-aligned metastable single-domain states at zero field. The results emphasize that the nature of anisotropy in natural magnetite does not just depend on the particle orientations, but on the presence of different stable and metastable domain states, and the mechanism of magnetic switching between them. Magnetic modelling of natural magnetic particles is therefore a vital method to extract and process anisotropic hysteresis parameters directly from the primary remanence carriers.more » « less
-
Magnetic Field Assisted Additive Manufacturing (MFAAM), 3D printing in a magnetic field, has the potential to fabricate high magnetic strength anisotropic bonded magnets. Here, 10, 35, and 54 wt% strontium ferrite bonded magnets using polyamide 12 binder were developed by twin screw compounding process and then printed via MFAAM samples in zero, and in 0.5 Tesla (H parallel to the print direction and print bed). The hysteresis curves were measured using a MicroSense EZ9 Vibrating Sample Magnetometer (VSM) for 3 different mount orientations of the sample on the sample holder to explore the magnetic anisotropy. The samples printed in zero field exhibited a weak anisotropy with an easy axis perpendicular to the print direction. This anisotropy is caused by the effect of shear flow on the orientation of the magnetic platelets in the 3D printer head. For the MFAAM samples, the S values are largest along the print bed normal. This anisotropy is caused by the field. The alignment of the magnetic particles happens when the molten suspension is in the extruder. When the material is printed, it is folded over on the print bed and its easy axis rotates 90° parallel to the print bed normally. Little realignment of the particles happens after it is printed, suggesting a sharp drop in temperature once the composite touches the print bed, indicating that field-induced effects in the nozzle dominate the anisotropy of MFAAM deposited samples.more » « less
-
SUMMARY Lamellar magnetism is a source of remanent magnetization in natural rocks different from common bulk magnetic moments in ferrimagnetic minerals. It has been found to be a source for a wide class of magnetic anomalies with extremely high Koenigsberger ratio. Its physical origin are uncompensated interface moments in contact layers of nanoscale ilmenite lamellae inside an hematite host, which also generate unusual low-temperature (low-T) magnetic properties, such as shifted low-T hysteresis loops due to exchange bias. The atomic-magnetic basis for the exchange bias discovered in the hematite-ilmenite system is explored in a series of papers. In this third article of the series, simple models are developed for lamellae interactions of different structures when samples are either cooled in zero-field, or field-cooled in 5 T to temperatures below the ordering temperature of ilmenite. These models are built on the low-temperature measurements described earlier in Paper II. The important observations include: (i) the effects of lamellar shapes on magnetic coupling, (ii) the high-T acquisition of lamellar magnetism and low-T acquisition of magnetization of ilmenite lamellae, (iii) the intensity of lamellar magnetism and the consequent ilmenite magnetism in populations of randomly oriented crystals, (iv) lattice-preferred orientation of the titanohematite host crystal populations and (v) the effects of magnetic domain walls in the host on hysteresis properties. Based on exemplary growth models of lamellae with different geometries and surface couplings we here provide simple models to assess and explain the different observations listed above. Already the simplified models show that the shapes of the edges of ilmenite lamellae against their hematite hosts can control the degree of low-T coupling between ilmenite, and the lamellar magnetic moments. The models also explain certain features of the low-T exchange bias in the natural samples and emphasize the role of lattice-preferred orientation upon the intensity of remanent magnetization. The inverse link between ilmenite remanence and exchange-bias shift in bimodal low-T ilmenite lamellae is related to different densities of hematite domain walls induced by the clusters of ilmenite lamellae.more » « less
