An official website of the United States government
Micro/nanoplastics, whether manufactured or resulting from environmental degradation, can enter the body through ingestion, inhalation, or dermal pathways. Previous research has found that nanoplastics with diameters of ≤100 nm can translocate into the circulatory system in a dose-dependent manner and potentially impact thrombosis and hemostasis. To investigate the direct effects of microplastics on fibrin clot formation, a simplified ex vivo human thrombin/fibrinogen clot model was utilized. The 100 nm polystyrene particles (non-functionalized [nPS] and aminated [aPS]) were preincubated (0–200 µg/mL) with either thrombin or fibrinogen, and fibrin clot formation was characterized via turbidity and thromboelastography (TEG). When the particles were preincubated with fibrinogen, little effect was observed for aPS or nPS on turbidity or TEG up through 100 µg/mL. TEG results demonstrated a significant impact on clot formation rate and strength, in the case of nPS preincubated with thrombin exhibiting a significant dose-dependent inhibitory effect. In conclusion, the presence of microplastics can have inhibitory effects on fibrin clot formation that are dependent upon both particle surface charge and concentration. Negatively charged nPS exhibited the most significant impacts to clot strength, turbidity, and rate of fibrin formation when first incubated with thrombin, with its impact being greatly diminished when preincubated with fibrinogen in this simplified fibrin clot model.
more »
« less
Microplastic Effects on Thrombin-Fibrinogen Clotting Dynamics Measured via Turbidity
Background/Hypothesis:Widespread use of plastic has created a world where exposure to microplastics is inevitable leading to their presence in our circulatory system. This raises questions about microplastics impact on thrombosis. Aminated polystyrene (aPS) plastics have been shown to increase platelet aggregation and thrombus formation in animal models. Given this, we hypothesized that aPS administration will increase the rate of fibrin clot formation in a simple thrombin-fibrinogen clot model. Project Methods:We evaluated how concentrations of 25-200 μg/mL of 100 nm aPS particles affect fibrin clot formation using turbidity assays. To determine the effect of surface charge, experiments were also performed with non-modified polystyrene (nPS) particles. Microplastics were pre-incubated either with physiological concentrations of fibrinogen or thrombin and the clot formation was measured using turbidity at 405 nm every 10 seconds over 45-minutes. Clotting parameters such as maximum turbidity (TurbMax), time to 90% maximum turbidity (TurbTime), and clot formation rate (Vmax) were determined and compared to controls without microplastics. Results:When increasing concentrations of aPS were preincubated with thrombin or fibrinogen, there was less than a 2-fold change in Vmax, TurbMax, and TurbTime. When increasing concentrations of nPS were preincubated with thrombin, there was up to a 27-fold decrease in Vmax, 2.4-fold decrease in TurbMax, and 4.36-fold increase in TurbTime compared to the control. Whereas preincubation of nPS with fibrinogen resulted in 1.86-fold decrease in Vmax, 1.63-fold decrease in TurbMax, and 2.30-fold increase in TurbTime. Potential Impact:In this simplified clotting model, it was surprising to find inhibitory effects on clot formation and that they were more pronounced with nPS than with aPS. However, these results align with increase prothrombin time observed in literature in presence of aPS. Therefore, future studies with more complex clotting models need to be performed before claims can be made on the impact of microplastics on thrombosis.
more »
« less
- Award ID(s):
- 1950672
- PAR ID:
- 10654621
- Publisher / Repository:
- Proceedings of IMPRS
- Date Published:
- Journal Name:
- Journal of Clinical Prosthodontics and Implantology
- Volume:
- 5
- Issue:
- 1
- ISSN:
- 2582-9904
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Vavylonis, Dimitrios (Ed.)Thrombin is an enzyme produced during blood coagulation that is crucial to the formation of a stable clot. Thrombin cleaves soluble fibrinogen into fibrin, which polymerizes and forms an insoluble, stabilizing gel around the growing clot. A small fraction of circulating fibrinogen is the variant γ A / γ ′, which has been associated with high-affinity thrombin binding and implicated as a risk factor for myocardial infarctions, deep vein thrombosis, and coronary artery disease. Thrombin is also known to be strongly sequestered by polymerized fibrin for extended periods of time in a way that is partially regulated by γ A / γ ′. However, the role of γ A / γ ′-thrombin interactions during fibrin polymerization is not fully understood. Here, we present a mathematical model of fibrin polymerization that considered the interactions between thrombin, fibrinogen, and fibrin, including those with γ A / γ ′. In our model, bivalent thrombin-fibrin binding greatly increased thrombin residency times and allowed for thrombin-trapping during fibrin polymerization. Results from the model showed that early in fibrin polymerization, γ ′ binding to thrombin served to localize the thrombin to the fibrin(ogen), which effectively enhanced the enzymatic conversion of fibrinogen to fibrin. When all the fibrin was fully generated, however, the fibrin-thrombin binding persisted but the effect of fibrin on thrombin switched quickly to serve as a sink, essentially removing all free thrombin from the system. This dual role for γ ′-thrombin binding during polymerization led to a paradoxical decrease in trapped thrombin as the amount of γ ′ was increased. The model highlighted biochemical and biophysical roles for fibrin-thrombin interactions during polymerization and agreed well with experimental observations.more » « less
-
Abstract Neonates possess a molecular variant of fibrinogen, known as fetal fibrinogen, characterized by increased sialic acid, a greater negative charge, and decreased activity compared with adults. Despite these differences, adult fibrinogen is used for the treatment of bleeding in neonates, with mixed efficacy. To determine safe and efficacious bleeding protocols for neonates, more information on neonatal fibrin clot formation and the influence of sialic acid on these processes is needed. Here, we examine the influence of sialic acid on neonatal fibrin polymerization. We hypothesized that the increased sialic acid content of neonatal fibrinogen promotes fibrin B:b knob-hole interactions and consequently influences the structure and function of the neonatal fibrin matrix. We explored this hypothesis through analysis of structural properties and knob:hole polymerization dynamics of normal and desialylated neonatal fibrin networks and compared them with those formed with adult fibrinogen. We then characterized normal neonatal fibrin knob:hole interactions by forming neonatal and adult clots with either thrombin or snake-venom thrombin-like enzymes that preferentially cleave fibrinopeptide A or B. Sialic acid content of neonatal fibrinogen was determined to be a key determinant of resulting clot properties. Experiments analyzing knob:hole dynamics indicated that typical neonatal fibrin clots are formed with the release of more fibrinopeptide B and less fibrinopeptide A than adults. After the removal of sialic acid, fibrinopeptide release was roughly equivalent between adults and neonates, indicating the influence of sialic acid on fibrin neonatal fibrin polymerization mechanisms. These results could inform future studies developing neonatal-specific treatments of bleeding.more » « less
-
ABSTRACT Musculoskeletal knee injuries are common and debilitating, with the most prevalent soft tissue injuries being anterior cruciate ligament (ACL) and meniscal tears. These tears do not heal well naturally, and biological therapies involving scaffolds are often unsuccessful, due in part to the synovial fluid environment of the joint. Viscous synovial fluid contains high concentrations of degradative enzymes, including plasmin, which prevents the stable formation of provisional fibrin scaffolds. Lack of provisional scaffold formation prevents bridging of torn tissue and subsequent remodeling for permanent tissue repair. Coagulation factors such as fibrinogen and thrombin, reinforced with synthetic platelet‐like particles (PLPs), can be introduced to synovial fluid to promote fibrin scaffold formation. PLPs bind to and retract fibrin fibers to enhance stiffness, density, and stability of fibrin scaffolds. Therefore, the objective of this work is to investigate the role of PLPs in enhancing fibrin scaffold formation and degradation capabilities within synovial fluid and to characterize the resulting scaffold structure, density, and mechanics. We investigated effects in synovial fluid with high or low viscosity, as viscosity can change with injury and can vary between individuals. Following the addition of clotting factors and PLPs to synovial fluid, we found an increase in fibrin scaffold density, structure, and maximum mechanics for low viscosity, but not high viscosity, synovial fluid groups. Furthermore, by lowering the viscosity of synovial fluid with hyaluronidase, the increase in scaffold density following PLP addition was restored, indicating the strong role of synovial fluid viscosity on stable scaffold formation. This technology contributes to the development of a more robust fibrin‐based therapy for intra‐articular musculoskeletal injuries.more » « less
-
Uncontrolled bleeding after trauma represents a substantial clinical problem. The current standard of care to treat bleeding after trauma is transfusion of blood products including platelets; however, donated platelets have a short shelf life, are in limited supply, and carry immunogenicity and contamination risks. Consequently, there is a critical need to develop hemostatic platelet alternatives. To this end, we developed synthetic platelet-like particles (PLPs), formulated by functionalizing highly deformable microgel particles composed of ultralow cross-linked poly (N-isopropylacrylamide) with fibrin-binding ligands. The fibrin-binding ligand was designed to target to wound sites, and the cross-linking of fibrin polymers was designed to enhance clot formation. The ultralow cross-linking of the microgels allows the particles to undergo large shape changes that mimic platelet shape change after activation; when coupled to fibrin-binding ligands, this shape change facilitates clot retraction, which in turn can enhance clot stability and contribute to healing. Given these features, we hypothesized that synthetic PLPs could enhance clotting in trauma models and promote healing after clotting. We first assessed PLP activity in vitro and found that PLPs selectively bound fibrin and enhanced clot formation. In murine and porcine models of traumatic injury, PLPs reduced bleeding and facilitated healing of injured tissue in both prophylactic and immediate treatment settings. We determined through biodistribution experiments that PLPs were renally cleared, possibly enabled by ultrasoft particle properties. The performance of synthetic PLPs in the preclinical studies shown here supports future translational investigation of these hemostatic therapeutics in a trauma setting.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.18060/26812
