An official website of the United States government
Abstract Force‐responsive molecules that produce fluorescent moieties under stress provide a means for stress‐sensing and material damage assessment. In this work, we report a mechanophore based on Diels‐Alder adductTAD‐Anof 4,4′‐(4,4′‐diphenylmethylene)‐bis‐(1,2,4‐triazoline‐3,5‐dione) and initiator‐substituted anthracene that can undergo retro‐Diels‐Alder (rDA) reaction by pulsed ultrasonication and compressive activation in bulk materials. The influence of having C−N versus C−C bonds at the sites of bond scission is elucidated by comparing the relative mechanical strength ofTAD‐Anto another Diels‐Alder adductMAL‐Anobtained from maleimide and anthracene. The susceptibility to undergo rDa reaction correlates well with bond energy, such that C−N bond containingTAD‐Andegrades faster C−C bond containingMAL‐Anbecause C−N bond is weaker than C−C bond. Specifically, the results from polymer degradation kinetics under pulsed ultrasonication shows that polymer containingTAD‐Anhas a rate constant of 1.59×10−5 min−1, whileMAL‐An(C−C bond) has a rate constant of 1.40×10−5 min−1. Incorporation ofTAD‐Anin a crosslinked polymer network demonstrates the feasibility to utilizeTAD‐Anas an alternative force‐responsive probe to visualize mechanical damage where fluorescence can be “turned‐on” due to force‐accelerated retro‐Diels‐Alder reaction.
more »
« less
Force‐Induced Selective Carbon‐Carbon Bond Cleavage in Mechanoresponsive Topochemical Polymers
Abstract Mechanoresponsive polymeric materials that respond to mechanical deformation are highly valued for their potential in sensors, degradation studies, and optoelectronics. However, direct visualization and detection of these responses remain significant obstacles. In this study, novel mechanoresponsive polybiidenedionediyl (PBIT) derivative topochemical polymers are developed that depolymerize under mechanical forces, exhibiting a distinct and irreversible color change in response to grinding, milling, and compression. This color change is attributed to the alteration of polymer backbone conjugation during elongated Carbon‐Carbon (C─C) single bond cleavage. Quantum chemical pulling simulations on PBIT polymers reveals a force range of 4.3–5.0 nN associated with the selective cleavage of elongated C─C single bonds. This force range is comparable to that observed for typical homolytic mechanophores, supporting the mechanistic interpretation of homolytic bond scission under mechanical stress. C─C bond cleavage kinetic studies of PBIT under compression indicates that strong interchain interactions significantly increase the pressure needed to cleave the elongated C─C bonds. Additionally, PBIT polymer thin films are composited with polydimethylsiloxane to create free‐standing and robust thin films, which can serve as ink‐free and rewritable paper for writing and stress visualization applications. This advancement opens new possibilities for utilizing crystalline and brittle topochemical polymers in practical applications.
more »
« less
- Award ID(s):
- 2045908
- PAR ID:
- 10656185
- Publisher / Repository:
- Wiley
- Date Published:
- Journal Name:
- Advanced Materials
- ISSN:
- 0935-9648
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Conjugated polymers consist of complex backbone structures and side‐chain moieties to meet various optoelectronic and processing requirements. Recent work on conjugated polymers has been devoted to studying the mechanical properties and developing new conjugated polymers with low modulus and high‐crack onset strain, while the thin film mechanical stability under long‐term external tensile strain is less investigated. Here we performed direct mechanical stress relaxation tests for both free‐standing and thin film floated on water surface on both high‐Tgand low‐Tgconjugated polymers, as well as a reference nonconjugated sample, polystyrene. We measured thin films with a range of film thickness from 38 to 179 nm to study the temperature and thickness effect on thin film relaxation, where an apparent enthalpy–entropy compensation effect for glassy polymer PS and PM6 thin films was observed. We also compared relaxation times across three different conjugated polymers and showed that both crystalline morphology and higher modulus reduce the relaxation rate besides higher glass transition temperature. Our work provides insights into the mechanical creep behavior of conjugated polymers, which will have an impact on the future design of stable functional organic electronics.more » « less
-
Abstract Mechanoresponsive color‐changing materials that can reversibly and resiliently change color in response to mechanical deformation are highly desirable for diverse modern technologies in optics, sensors, and robots; however, such materials are rarely achieved. Here, a fatigue‐resistant mechanoresponsive color‐changing hydrogel (FMCH) is reported that exhibits reversible, resilient, and predictable color changes under mechanical stress. At its undeformed state, the FMCH remains dark under a circular polariscope; upon uniaxial stretching of up to six times its initial length, it gradually shifts its color from black, to gray, yellow, and purple. Unlike traditional mechanoresponsive color‐changing materials, FMCH maintains its performance across various strain rates for up to 10 000 cycles. Moreover, FMCH demonstrates superior mechanical properties with fracture toughness of 3000 J m−2, stretchability of 6, and fatigue threshold up to 400 J m−2. These exceptional mechanical and optical features are attributed to FMCH's substantial molecular entanglements and desirable hygroscopic salts, which synergistically enhance its mechanical toughness while preserving its color‐changing performance. One application of this FMCH as a tactile sensoris then demonstrated for vision‐based tactile robots, enabling them to discern material stiffness, object shape, spatial location, and applied pressure by translating stress distribution on the contact surface into discernible images.more » « less
-
Mechanical stimuli such as strain, force, and pressure are pervasive within and beyond the human body. Mechanoresponsive hydrogels have been engineered to undergo changes in their physicochemical or mechanical properties in response to such stimuli. Relevant responses can include strain-stiffening, self-healing, strain-dependent stress relaxation, and shear rate-dependent viscosity. These features are a direct result of dynamic bonds or non- covalent/physical interactions within such hydrogels. The contributions of various types of bonds and intermolecular interactions to these behaviors are important to more fully understand the resulting materials and engineer their mechanoresponsive features. Here, strain-stiffening in carboxymethylcellulose hydrogels crosslinked with pendant dynamic-covalent boronate esters using tannic acid is studied and modulated as a function of polymer concentration, temperature, and effective crosslink density. Furthermore, these materials are found to exhibit self-healing and strain- memory, as well as strain-dependent stress relaxation and shear rate-dependent changes in gel viscosity. These features are attributed to the dynamic nature of the boronate ester crosslinks, inter-chain hydrogen bonding and bundling, or a combination of these two intermolecular interactions. This work provides insight into the interplay of such interactions in the context of mechanoresponsive behaviors, particularly informing the design of hydrogels with tunable strain- stiffening. The multi-responsive and tunable nature of this hydrogel system therefore presents a promising platform for a variety of applications.more » « less
-
null (Ed.)We report conversion of esters to thioesters via selective C–O bond cleavage/weak C–S bond formation under transition-metal-free conditions. The method is notable for a general and practical transition-metal-free system, broad substrate scope and excellent functional group tolerance. The strategy was successfully deployed in late-stage thioesterification, site-selective cross-coupling/thioesterification/decarbonylation and easy-to-handle gram scale thioesterification. Selectivity and computational studies were performed to gain insight into the formation of weak C–S bonds by C–O bond cleavage, which contrasts with the traditional trend of nucleophilic additions to carboxylic acid derivatives.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript
- Journal Article:
- https://doi.org/10.1002/adma.202510482
