Title: Facet-Specific Liquid-Phase Exfoliation of an Ionic 1D Crystal, (NbSe 4 ) 3 I, into Ultrathin Nanoribbons
Liquid-phase exfoliation (LPE) of emergent materials composed of weakly bound one-dimensional (1D) and quasi-1D (q-1D) building blocks presents a straightforward route not only for the discovery of confined physical states in 1D but also for the realization of scalable functional devices. However, compared to the more established routes in two-dimensional (2D) crystals, the nature of LPE in 1D and q-1D crystals presents a more random process. This distinction arises from the various available interchain directions across several crystallographic facets unique to 1D and q1D solids, from which the chains can be cleaved apart into a stochastic combination of nanowires, nanoribbons, and nanosheets. Using the 1D ionic phase comprised of ∼4.3 Å thin chains, (NbSe4)3I, we demonstrate herein the profound influence of crystal morphology, exposed facets, and their degree of wettability, passivation, and surface roughness in directing the LPE behavior of 1D crystals. Through the growth of bulk crystals as long needles with exposed (hk0) facets or as quasi-2D flakes with exposed (00l) facets susceptible to passivation, we show that these two distinct precursor morphologies display divergent behaviorboth in solvent preference and quality of resulting nanostructures. Under optimal conditions involving bulk needles and tetrahydrofuran as solvent, we show that the LPE of (NbSe4)3I results in ultrathin nanoribbons with high aspect ratios bearing lengths >5 μm, thicknesses down to 7.2 ± 2.6 nm, and widths of 26.4 ± 10.9 nm. The nanoribbons, solution processable as thin films, retain their native crystal structure and semiconducting character. Moreover, the nanoribbons also manifest pronounced degrees of bending and substrate-driven twisting at the nanoscale while maintaining long-range order. These results highlight a means to understand the fundamental chemical and physical behavior of noncovalently bound 1D solids through the realization of solution-processable 1D nanoribbons and nanowires that also have the potential as components for next-generation devices that approach the atomic scale.  more » « less
Award ID(s):
2340918 2011967
PAR ID:
10657894
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
American Chemical Society
Date Published:
Journal Name:
ACS Materials Au
ISSN:
2694-2461
Subject(s) / Keyword(s):
Sponsoring Org:
National Science Foundation
More Like this
  1. The rediscovery of one-dimensional (1D) and quasi-1D (q-1D) van der Waals (vdW) crystals ushered the realization of nascent physical properties in 1D that are suitable for applications in photonics, electronics, and sensing. However, despite renewed interest in the creation and understanding of the physical properties of 1D and q-1D vdW crystals, the lack of accessible synthetic pathways for growing well-defined nanostructures that extend across several length scales remains. Using the highly anisotropic 1D vdW NbS3–I crystal as a model phase, we present a catalyst-free and bottom-up synthetic approach to access ultralong nanowires, with lengths reaching up to 7.9 mm and with uniform thicknesses ranging from 13 to 160 nm between individual nanowires. Control over the synthetic parameters enabled the modulation of intra- and interchain growth modalities to selectively yield only 1D nanowires or quasi-2D nanoribbons. Comparative synthetic and density functional theory (DFT) studies with a closely related nondimerized phase, ZrS3, show that the unusual preferential growth along 1D can be correlated to the strongly anisotropic bonding and dimeric nature of NbS3–I. 
    more » « less
  2. Abstract Inorganic freestanding helices are rare and sought‐after for their unusual physical states endowed by chirality. To this end, III–VI–VII solids have emerged as a distinct class of ternary 1D van der Waals (vdW) crystals which bear atomically precise helical motifs. However, the physical understanding of the intrinsic and size‐dependent properties of these materials is limited by the lack of synthetic strategies to directly access freestanding nanocrystals in high volumes. Using GaSI as a representative phase, a bottom‐up strategy is presented to grow high yields of ultrathin nanostructures based on this helical materials class. With this strategy, it is possible to grow single crystals of 1D nanowires with thicknesses in the 10–100 nm range at high temperature conditions, as well as quasi‐2D nanoribbons at lower temperatures. The bandgap of the nanowires is established in the UV region and demonstrates the persistence of nonlinear optical behavior as evidence of the persistence of the noncentrosymmetric crystal structure of GaSI at the nanoscale. Inspired by these results, the effect of the helical nature of GaSI on the electronic structure of hypothetical single chains is probed from first principles and shows the pronounced handedness‐dependent and helicity‐imposed spin polarization at the single helix regime. 
    more » « less
  3. The recent rediscovery of 1D and quasi-1D (q-1D) van der Waals (vdW) crystals has laid foundation for the realization of emergent electronic, optical, and quantum-confined physical phenomena in both bulk and at the nanoscale. Of these, the highly anisotropic q-1D vdW crystal structure and the visible-light optical/ optoelectronic properties of antimony trisulfide (Sb2S3) have led to its widespread consideration as a promising building block for photovoltaic and non-volatile phase change devices. However, while these applications will greatly benefit from well-defined and sub-nanometer-thick q-1D structures, little has been known about feasible synthetic routes that can access single covalent chains of Sb2S3. In this work, we explore how encapsulation in single or multi-walled carbon nanotubes (SWCNTs or MWCNTs) and visible-range transparent boron nitride nanotubes (BNNTs) influences the growth and phase of Sb2S3 nanostructures. We demonstrate that nanotubes with smaller diameters had a more pronounced effect in the crystallographic growth direction and orientation of Sb2S3 nanostructures, promoting the crystallization of the guest structures along the long-axis [010]-direction. As such, we were able to reliably access wellordered few to single covalent chains of Sb2S3 when synthesized within defect-free SWCNTs with sub2 nm inner diameters. Intriguingly, we found that the degree of crystalline order of Sb2S3 nanostructures was strongly influenced by the presence of defects and discontinuities along the Sb2S3-nanotube interface. We show that amorphous nanowire domains of Sb2S3 form around defect sites in larger, multi-walled nanotubes that manifest inner wall defects and discontinuities, suggesting a means to manipulate the crystallization dynamics of confined sub-10 nm-thick Sb2S3 nanostructures within nanotubes. Lastly, we show that ultranarrow amorphous Sb2S3 can impart functionality onto isolable BNNTs with photocurrent generation in the pA range which, alongside the dispersibility of the Sb2S3@BNNTs, could be leveraged to easily fabricate photoresistors only a few nm in width. Altogether, our results serve to solidify the understanding of how q-1D vdW pnictogen chalcogenides crystallize within confined synthetic platforms and are a step towards realizing functional materials from ensembles of encapsulated heterostructures 
    more » « less
  4. Antimony selenide (Sb2Se3) has excellent directional optical and electronic behaviors due to its quasi-1D nanoribbons structure. The photovoltaic performance of Sb2Se3 solar cells largely depends on the orientation of the nanoribbons. It is desired to grow these Sb2Se3 ribbons normal to the substrate to enhance photoexcited carrier transport. Therefore, it is necessary to develop a strategy for the vertical growth of Sb2Se3 nanoribbons to achieve high-efficiency solar cells. Since antimony sulfide (Sb2S3) and Sb2Se3 are from the same space group (Pbnm) and have the same crystal structure, herein an ultrathin layer (≈20 nm) of Sb2S3 has been used to assist the vertical growth of Sb2Se3 nanoribbons to improve the overall efficiency of Sb2Se3 solar cell. The Sb2S3 thin layer deposited by the hydrothermal process helps the Sb2Se3 ribbons grow normal to the substrate and increases the efficiency from 5.65% to 7.44% through the improvement of all solar cell parameters. This work is expected to open a new direction to tailor the Sb2Se3 grain growth and further develop the Sb2Se3 solar cell in the future. 
    more » « less
  5. Abstract The ongoing reduction in transistor sizes drives advancements in information technology. However, as transistors shrink to the nanometer scale, surface and edge states begin to constrain their performance. 2D semiconductors like transition metal dichalcogenides (TMDs) have dangling‐bond‐free surfaces, hence achieving minimal surface states. Nonetheless, edge state disorder still limits the performance of width‐scaled 2D transistors. This work demonstrates a facile edge passivation method to enhance the electrical properties of monolayer WSe2nanoribbons, by combining scanning transmission electron microscopy, optical spectroscopy, and field‐effect transistor (FET) transport measurements. Monolayer WSe2nanoribbons are passivated with amorphous WOxSeyat the edges, which is achieved using nanolithography and a controlled remote O2plasma process. The same nanoribbons, with and without edge passivation are sequentially fabricated and measured. The passivated‐edge nanoribbon FETs exhibit 10 ± 6 times higher field‐effect mobility than the open‐edge nanoribbon FETs, which are characterized with dangling bonds at the edges. WOxSeyedge passivation minimizes edge disorder and enhances the material quality of WSe2nanoribbons. Owing to its simplicity and effectiveness, oxidation‐based edge passivation could become a turnkey manufacturing solution for TMD nanoribbons in beyond‐silicon electronics and optoelectronics. 
    more » « less