An official website of the United States government
Significant along-strike variations of seismicity are observed at subduction zones, which are strongly influenced by physical properties of the plate interface and rheology of the crust and mantle lithosphere. However, the role of the oceanic side of the plate boundary on seismicity is poorly understood due to the lack of offshore instrumentations. Here tomographic results of the Cascadia subduction system, resolved with full-wave ambient noise simulation and inversion by integrating dense offshore and onshore seismic datasets, show significant variations of the oceanic lithosphere along strike and down dip from spreading centers to subduction. In central Cascadia, where seismicity is sparse, the slab is imaged as a large-scale low-velocity feature near the trench, which is attributed to a highly hydrated and strained oceanic lithosphere underlain by a layer of melts or fluids. The strong correlation suggests that the properties of the incoming oceanic plate play a significant role on seismicity.
more »
« less
Tectonics and Geodynamics of the Cascadia Subduction Zone
The Cascadia subduction zone, where the young and thin oceanic Juan de Fuca plate sinks beneath western North America, represents a thermally hot endmember of global subduction systems. Cascadia exhibits complex and three-dimensional heterogeneities including variable coupling between the overriding and downgoing plates, the amount of water carried within and released by the oceanic plate, flow patterns within the mantle wedge and backarc, and the continuity and depth extent of the subducting slab. While recent research has benefitted from extensive onshore and offshore deployments of geophysical instrumentation, a consensus on many important aspects of Cascadia’s magmatic, tectonic, and geodynamic setting remains elusive.
more »
« less
- Award ID(s):
- 1751974
- PAR ID:
- 10658167
- Publisher / Repository:
- Elements
- Date Published:
- Journal Name:
- Elements
- Volume:
- 18
- Issue:
- 4
- ISSN:
- 1811-5209
- Page Range / eLocation ID:
- 226 to 231
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract The details of subduction zone locking place constraints on the characteristics of megathrust events. Due to the lack of significant present‐day seismicity along the Cascadia subduction interface, geodetic data are used to assess subduction locking along the margin. We isolate the subduction signal from other tectonic signals within the Cascadia GPS field, to assess the details of plate‐interface locking. Apparent coupling determined by a simple homogenous elastic half‐space inversion cannot everywhere reproduce the subduction component of the GPS field. Consequently, we explore the relationships among upper‐plate strength, locking depth and the resulting surface velocity signal using 2D finite element models. When the upper plate is composed of a weak material, trenchward of a strong backstop, we find that the down‐dip limit of locking relative to the location of the weak‐to‐strong transition controls how upper‐plate deformation is spatially distributed. If locking extends into the stronger material, as observed in central Cascadia, the surface velocity field propagates farther inland than expected from a simple homogeneous elastic model. In contrast, in southern Cascadia, because locking terminates within the weak accretionary margin, upper‐plate shortening is localized within the weaker material, particularly in the region between the end of locking and the strong Klamath terrane. This behavior provides a possible mechanism for producing the high (geodetic and permanent) uplift rates, plate‐motion‐parallel shortening, and crustal exhumation observed in many active and fossil subduction zones.more » « less
-
SUMMARY A new amphibious seismic data set from the Cascadia subduction zone is used to characterize the lithosphere structure from the Juan de Fuca ridge to the Cascades backarc. These seismic data are allowing the imaging of an entire tectonic plate from its creation at the ridge through the onset of the subduction to beyond the volcanic arc, along the entire strike of the Cascadia subduction zone. We develop a tilt and compliance correction procedure for ocean-bottom seismometers that employs automated quality control to calculate robust station noise properties. To elucidate crust and upper-mantle structure, we present shoreline-crossing Rayleigh-wave phase-velocity maps for the Cascadia subduction zone, calculated from earthquake data from 20 to 160 s period and from ambient-noise correlations from 9 to 20 s period. We interpret the phase-velocity maps in terms of the tectonics associated with the Juan de Fuca plate history and the Cascadia subduction system. We find that thermal oceanic plate cooling models cannot explain velocity anomalies observed beneath the Juan de Fuca plate. Instead, they may be explained by a ≤1 per cent partial melt region beneath the ridge and are spatially collocated with patches of hydration and increased faulting in the crust and upper mantle near the deformation front. In the forearc, slow velocities appear to be more prevalent in areas that experienced high slip in past Cascadia megathrust earthquakes and generally occur updip of the highest-density tremor regions and locations of intraplate earthquakes. Beneath the volcanic arc, the slowest phase velocities correlate with regions of highest magma production volume.more » « less
-
The origin of rupture segmentation along subduction zone megathrusts and linkages to the structural evolution of the subduction zone are poorly understood. Here, regional-scale seismic imaging of the Cascadia margin is used to characterize the megathrust spanning ~900 km from Vancouver Island to the California border, across the seismogenic zone to a few tens of kilometers from the coast. Discrete domains in lower plate geometry and sediment underthrusting are identified, not evident in prior regional plate models, which align with changes in lithology and structure of the upper plate and interpreted paleo-rupture patches. Strike-slip faults in the lower plate associated with oblique subduction mark boundaries between regions of distinct lower plate geometry. Their formation may be linked to changes in upper plate structure across long-lived upper plate faults. The Juan de Fuca plate is fragmenting within the seismogenic zone at Cascadia as the young plate bends beneath the heterogeneous upper plate resulting in structural domains that coincide with paleo-rupture segmentation.more » « less
-
The southern Cascadia forearc undergoes a three-stage tectonic evolution, each stage involving different combinations of tectonic drivers, that produce differences in the upper-plate deformation style. These drivers include subduction, the northward migration of the Mendocino triple junction and associated thickening and thinning related to the Mendocino Crustal Conveyor (MCC) effect, and the NNW translation of the Sierra Nevada-Great Valley (SNGV) block. We combine geodetic data, plate reconstructions, seismic tomography and topographic observations to determine how the southern Cascadia upper plate is deforming in response to the combined effects of subduction and NNW-directed (MCC- and SNGV-related) tectonic processes. The location of the terrane boundaries between the relatively weak Franciscan complex and the stronger Klamath Mountain province (KMP) and SNGV block has been a key control on the style of upper-plate deformation in the southern Cascadia forearc since the mid-Miocene. At ∼15 Ma, present-day southern Cascadia was in central Cascadia and deformation there was principally controlled by subduction processes. Since ∼5 Ma, this region of the Cascadia upper plate, where the KMP lies inboard of the Franciscan complex, has been deforming in response to both subduction and MCC- and SNGV-related effects. GPS data show that the KMP is currently moving to the NNW at ∼8–12 mm/yr with little internal deformation, largely in response to the northward push of the SNGV block at its southern boundary. In contrast, the Franciscan complex is accommodating high NNW-directed and NE-directed shortening strain produced by MCC-related shortening and subduction coupling respectively. This composite tectonic regime can explain the style of faulting within and west of the KMP. Associated with this Mendocino Crustal Conveyor crustal thickening, seismic tomography imagery shows a region of low velocity material that we interpret to represent crustal flow and injection of Franciscan crust into the KMP at intracrustal levels. We suggest that this MCC-related crustal flow and injection of material into the KMP is a relatively young feature (post ∼5 Ma) and is driving a rejuvenated period of rock uplift within the KMP. This scenario provides a potential explanation for steep channels and high relief, suggestive of rapid erosion rates within the interior of the KMP.more » « less
- Free Publicly Accessible Full Text
-
Accepted Manuscript1.0
- Journal Article:
- https://doi.org/10.2138/gselements.18.4.226
