skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Electronic structure of YV6Sn6 probed by de Haas–van Alphen oscillations and density functional theory
This study investigates the electronic structure of the vanadium-based kagome metal YV6Sn6 using magnetoresistance (MR) and torque magnetometry. The MR exhibits a nearly linear, non-saturating behavior, increasing by up to 55% at 35 T but shows no evidence of Shubnikov–de Haas oscillations. In contrast, the torque signal, measured up to 41.5 T, reveals clear de Haas–van Alphen (dHvA) oscillations over a wide frequency range, from a low frequency of Fα ∼20 T to high frequencies between 8 and 10 kT. Angular and temperature-dependent dHvA measurements were performed to probe the Fermi surface parameters of YV6Sn6. The dHvA frequencies display weak angular dependence, and the effective mass, determined by fitting the temperature-dependent data to the Lifshitz–Kosevich formula, is 0.097 mo, where mo represents the free electron mass. To complement the experimental findings, we computed the electronic band structure and Fermi surface using density functional theory. The calculations reveal several notable features, including multiple Dirac points near the Fermi level, flatbands, and Van Hove singularities. Two bands cross the Fermi level, contributing to the Fermi surface, with theoretical frequencies matching well with the observed dHvA frequencies. These combined experimental and theoretical insights enhance our understanding of the electronic structure of YV6Sn6 and provide a valuable framework for studying other vanadium- and titanium-based kagome materials.  more » « less
Award ID(s):
2336011
PAR ID:
10658420
Author(s) / Creator(s):
; ; ; ; ; ; ;
Publisher / Repository:
AIP Publishing
Date Published:
Journal Name:
APL Quantum
Volume:
2
Issue:
1
ISSN:
2835-0103
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, Physical Review B)
    NA (Ed.)
    This study investigates the electronic structure of the kagome metal YbTi3Bi4 using high-field torque magnetometry. The torque signal measured at a maximum field of 41.5 T reveals clear de Haas–van Alphen (dHvA) oscillations with a major frequency peak at Fδ ∼ 130 T. By rotating the sample at various tilt angles θ, we observed that Fδ exhibits a nearly 1/cosθ dependence, indicating the presence of a quasi-two-dimensional (2D) Fermi surface (FS) in YbTi3Bi4. This argument is further supported by the detection of a forward-leaning, sawtoothlike waveform in the dHvA effect, a hallmark of 2D FS characteristics. Notably, we identified two high-frequency peaks near Fχ ∼ 1900 T and Fλ ∼ 5600 T; however, these peaks quickly disappear at θ greater than 21◦. To better understand experimental observations, we computed the electronic band structure and FS using ab initio density-functional theory (DFT). The electronic bands reveal the presence of several Dirac points, flat bands, and van Hove singularities near the Fermi level. Five bands cross the Fermi level and contribute to the FS of this material. The FS comprises cylindrical sheets, with theoretical frequencies from the FS pockets aligning well with the experimental dHvA frequencies. Several FS parameters characterizing Fδ were determined by analyzing the temperature and field dependence of the dHvA oscillations using the Lifshitz-Kosevich theory. The detailed electronic properties presented in this work provide critical insights into the electronic structure of YbTi3Bi4 and other titanium-based kagome compounds. 
    more » « less
  2. ; ; ; ; ; ; ; ; (, Physical Review B)
    The shape of the Fermi surface, and the cyclotron effective mass of the kagome magnet GdV6Sn6 charge carriers are investigated using de Haas van Alphen (dHvA) oscillations measurements and electronic band structure calculations. The temperature and angle-dependent torque magnetometry measurements revealed at least nine different frequencies ranging from ~10 T up to ~9000 T. These frequencies correspond to extremal areas of the Fermi surface ranging from ~0.2 % up to 50% of the first Brillouin zone, qualitatively consistent with the electronic band structure calculations. The angle dependent dHvA oscillation frequencies indicate that the smaller pockets of the Fermi surface have almost 3D character whereas the bigger pockets of the Fermi surface are mostly two-dimensional. We also find evidence of the presence of light (0.28(1) m0) as well as heavy (2.37(18) m0) charge carriers through the analysis of the temperature dependence of dominant frequencies. The comparison of the observed frequencies with the electronic band structure calculations indicates that the heavy masses correspond to saddle-point-like features of electronic band structure at the M point. The observation of the multiple low frequencies and the calculated contributions from various bands to such low frequencies prevent the estimation of topological nature of bands containing lighter fermions. In conclusion, our work reveals the features of a Fermi surface containing enhanced mass fermions originated from saddle points in the electronic band structure at the M point, which is inherent to kagome lattices. 
    more » « less
  3. ; ; ; ; ; ; ; ; (, Physical Review B)
    NA (Ed.)
    This work presents the evolution of the electronic properties of kagome superconductor CsV3Sb5 under pressure. The magnetoresistance under high fields of 43 T showed clear Shubnikov–de Haas (SdH) oscillations with multiple frequencies up to 2000 T. With the application of pressure, we observed a sudden change in SdH oscillations with the disappearance of the high-frequency signal near the critical pressure Pc1 ∼ 0.7 GPa. We argue that this change could be due to a reconstruction of the Fermi surface (FS) in CsV3Sb5. To interpret our experimental data, we computed the electronic band structures and FS of CsV3Sb5 using ab initio density functional theory. Our results indicate that both the electronic bands and FS of CsV3Sb5 are highly sensitive to external pressure. The deformation of FS pockets with increasing pressure qualitatively explains our experimental observations. The pressure-driven FS instability in CsV3Sb5 may induce changes in its electronic states, such as superconductivity, charge density wave, nontrivial topology, and more. Therefore, these results are invaluable for gaining insights into these electronic states in CsV3Sb5, as well as in other kagome materials. 
    more » « less
  4. ; ; ; ; ; ; ; ; ; ; et al (, Advanced Functional Materials)
    Abstract In recent years,Tdtransition metal dichalcogenides have been heavily explored for their type‐II Weyl topology, gate‐tunable superconductivity, and nontrivial edge states in the monolayer limit. Here, the Fermi surface characteristics and fundamental transport properties of similarly structured 2M‐WSe2bulk single crystals are investigated. The measurements of the angular dependent Shubnikov–de Haas oscillations, with support from first‐principles calculations, reveal multiple three‐ and two‐dimensional Fermi pockets, one of which exhibits a nontrivial Berry's phase. In addition, it is shown that the electronic properties of 2M‐WSe2are similar to those of orthorhombic MoTe2and WTe2, having a single dominant carrier type at high temperatures that evolves into coexisting electron and hole pockets with near compensation at temperatures below 100 K, suggesting the existence of a Lifshitz transition. Altogether, the observations provide evidence towards the topologically nontrivial electronic properties of 2M‐WSe2and motivate further investigation on the topological properties of 2Mtransition metal dichalcogenides in the atomically thin limit. 
    more » « less
  5. ; ; (, Journal of Applied Physics)
    The thermal chiral anomaly is a new mechanism for thermal transport that occurs in Weyl semimetals (WSMs). It is attributed to the generation and annihilation of energy at Weyl points of opposite chirality. The effect was observed in the Bi1−xSbx alloy system, at x = 11% and 15%, which are topological insulators at zero field and driven into an ideal WSM phase by an external field. Given that the experimental uncertainty on x is of the order of 1%, any systematic study of the effect over a wider range of x requires precise knowledge of the transition composition xc at which the electronic bands at the L-point in these alloys have Dirac-like dispersions. At x > xc, the L-point bands are inverted and become topologically non-trivial. In the presence of a magnetic field along the trigonal direction, these alloys become WSMs. This paper describes how the temperature dependence of the frequency of the Shubnikov–de Haas oscillations F(x,T) at temperatures of the order of the cyclotron energy can be used to find xc and characterize the topology of the electronic Fermi surface. Semimetallic Bi1−xSbx alloys with topologically trivial bands have dF(x,T)/dT ≥ 0; those with Dirac/Weyl fermions display dF(x,T)/dT < 0. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email