skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Attention:

The NSF Public Access Repository (NSF-PAR) system and access will be unavailable from 10:00 PM ET on Thursday, March 12 until 2:00 AM ET on Friday, March 13 due to maintenance. We apologize for the inconvenience.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Data Driven Control of PMSG with an Active Rectifier for DC Microgrids
In this paper, a data-driven control strategy is proposed to regulate the dc bus voltage for permanent magnet synchronous generators (PMSGs) with an active rectifier. The proposed technique utilizes input/output data from a black-box model of the system, ensuring accuracy in predicting system behavior under the persistence of excitation of the input. A data-driven predictive control strategy is then formulated to generate the current references to an inner loop in order to accurately regulate the dc bus voltage. Control hardware-in-the-loop results of the PMSG and active rectifier for dc microgrid applications validate the effectiveness of the method and assess the feasibility of implementing the controller in hardware.  more » « less
Award ID(s):
2339434
PAR ID:
10663026
Author(s) / Creator(s):
 ;  ;  
Publisher / Repository:
IEEE
Date Published:
Page Range / eLocation ID:
1 to 7
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; (, 2020 IEEE 21st Workshop on Control and Modeling for Power Electronics (COMPEL))
    null (Ed.)
    In wireless power transfer (WPT) applications, the multi-level switched capacitor topology achieves significant advantages in terms of efficiency, system loading, THD, and output regulation. The topology requires dual-loop control in order to harness these benefits. First, a small signal discrete time model for the 7-level rectifier WPT system is developed. Then, a control loop is designed that enables the rectifier to regulate DC load voltage by varying its modulation scheme. Next, the WPT carrier frequency is sensed and a phase-locked loop is used in combination with the small signal power stage model to design a closed-loop controller that synchronizes frequency and regulates control phase through adjustments of the switching period. Finally, cross-coupling interactions between the two control loops are modeled, and stable dual-loop operation is shown. 
    more » « less
  2. ; ; (, IEEE Transactions on Power Electronics)
    In this paper, a wireless charging architecture employing a multilevel switched-capacitor (MSC) AC-DC rectifier is investigated. The proposed MSC rectifier features a multilevel design which is scalable to accommodate different power ratings and load ranges. The topology showcases advantages for wireless power transfer (WPT) systems in terms of compactness, efficiency, impedance tunability, and harmonic attenuation. The single-stage active topology is capable of varying its low-distortion staircase input voltage to tune the wireless power transfer system for high system-wide efficiency. A 7-level, 20 W prototype is used to verify the WPT loading and loss analysis. The prototype operates at 150 kHz with up to 3:1 step-down conversion ratio to an output voltage of 5.0 V. The experimental peak DC-to-DC efficiency is 93.8% and the rectifier peak efficiency is 98.3%. The rectifier demonstrates low waveform distortion and high efficiency across many WPT loading conditions, solidifying its place as a strong candidate for wireless power applications. 
    more » « less
  3. ; ; (, IEEE Transactions on Sustainable Energy)
    This paper proposes a methodology to increase the lifetime of the central battery energy storage system (CBESS) in an islanded building-level DC microgrid (MG) and enhance the voltage quality of the system by employing the supercapacitor (SC) of electric vehicles (EVs) that utilize battery-SC hybrid energy storage systems. To this end, an adaptive filtration-based (FB) current-sharing strategy is proposed in the voltage feedback control loop of the MG that smooths the CBESS current to increase its lifetime by allocating a portion of the high-frequency current variations to the EV charger. The bandwidth of this filter is adjusted using a data-driven algorithm to guarantee that only the EV's SC absorbs the high-frequency current variations, thereby enabling the EV's battery energy storage system (BESS) to follow its standard constant current-constant voltage (CC-CV) charging profile. Therefore, the EV's SC can coordinate with the CBESS without impacting the charging profile of the EV's BESS. Also, a small-signal stability analysis is provided indicating that the proposed approach improves the marginal voltage stability of the DC MG leading to better transient response and higher voltage quality. Finally, the performance of the proposed EV charging is validated using MATLAB/Simulink and hardware-in-the-loop (HIL) testing. 
    more » « less
  4. ; ; ; (, 2020 IEEE Applied Power Electronics Conference and Exposition (APEC))
    null (Ed.)
    The cascaded H-bridge multilevel active rectifier is a prominent converter configuration. It presents compelling advantages, including high adjustability for a number of applications, such as in solid-state transformers, traction applications, medium and high power motor drives and battery chargers. However, when the H-bridge is operating under an unbalanced load and asymmetrical voltage conditions, it becomes important to design advanced control strategies to maintain the stability of the system. In this study, a Lyapunov-function based control method is proposed for controlling the single-phase cascaded H-bridge active rectifier to achieve global asymptotic stability. A capacitor voltage feedback is added to the conventional Lyapunov-function based stabilizing control method to minimize the resonance of the LCL filter. Additionally, a Proportional-Resonant (PR) control approach is adopted to obtain the reference current signal. This increases the robustness of the current control scheme. A DC voltage balancing control procedure is also employed to prevent the unbalanced DC voltage conditions among the H-bridges. The DC voltage is controlled via a PI controller. The capability of the control approach is verified with simulation and experimental studies. 
    more » « less
  5. ; ; ; (, IEEE)
    This paper presents a novel direct duty-to-current control strategy to mitigate the dc bias and eliminate the need for a dc blocking capacitor in Dual Active Bridge (DAB) converters. The proposed control mechanism directly controls the duty cycle of each leg in the primary H-bridge to regulate the average (over one switching period) volt-seconds applied to the transformer primary winding to be zero without a dc blocking capacitor, under both steady-state and transient operations. This strategy is particularly relevant for electric vehicle (EV) applications, where variations in power demand and charging protocols can introduce dc bias, and the proposed control strategy work seamlessly with the output voltage control loop, during both steady-state operation and transients. The analysis, presented in detail, includes simulation results validating the effectiveness of the proposed control strategy under various steady-state and transient conditions, demonstrating its robustness and applicability in EV systems. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email