This paper introduces novel dynamic event-triggered control (ETC) mechanisms for 2 × 2 linear hyperbolic PDEs in three configurations: continuous-time event-triggered control (CETC), periodic event-triggered control (PETC), and self-triggered control (STC). These mechanisms ensure global exponential stability (GES) under ETC using PDE backstepping, with stability estimates provided in the spatial L2 norm of the states. The proposed CETC and PETC designs are observer-based and require continuous boundary measurements collocated with the actuation. In contrast, the STC design requires full-state measurements; however, unlike CETC and PETC, it does not require continuous measurements for the triggering mechanism—only measurements taken at event times. In the CETC design, a lower bound on the time between two consecutive events is enforced, and a dynamic variable with appropriately designed switching dynamics is introduced. By employing a novel Lyapunov functional, GES of the closed-loop system is established under zero-order hold implementation of the backstepping control between events. Events are triggered when the dynamic variable crosses zero from the positive side, after which it is immediately reset to an appropriate nonnegative value. Detecting events, therefore, necessitates continuous monitoring of this dynamic variable. To address this limitation, PETC and STC strategies are proposed. The PETC design identifies a suitable triggering condition that requires only periodic checks and derives an upper bound on the allowable sampling period. This PETC approach preserves the GES guaranteed by CETC without requiring continuous monitoring of a triggering condition, although it still relies on continuous measurements. Unlike CETC and PETC, STC requires neither continuous measurements nor monitoring of a triggering condition. Instead, at each event, STC computes the time to the next event — beyond a suitably enforced minimal dwell-time — using only measurements taken at events. Despite relying solely on event-triggered measurements, STC is capable of guaranteeing GES of the closed-loop system. The well-posedness of the closed-loop systems under all three strategies is established. A simulation study is provided to illustrate the theoretical results.
more »
« less
Sampled-data Boundary Control of a Class of Reaction-Diffusion PDEs: A Lyapunov-based Approach
This paper introduces a novel observer-based dynamic event-triggered control (ETC) approach for 2 × 2 linear hyperbolic PDEs with collocated sensing and actuation. The proposed method guarantees global exponential stability (GES) under ETC using PDE backstepping, with stability estimates provided in the spatial L2 norm of the states. The triggering mechanism explicitly enforces a lower bound on the time interval between consecutive events, ruling out the possibility of Zeno behavior, and introduces a dynamic variable with appropriate switching dynamics. Events are triggered when the dynamic variable crosses zero from positive, after which the variable is immediately reset to an appropriate nonnegative value. By employing a novel Lyapunov functional that incorporates the L2 norms of the observer and observer error target system states, the switching dynamic variable, and a state-independent dynamic reset variable modulated by the square of the control input sampling error, the GES of the closed-loop system is established under the zero-order hold application of the backstepping control between events. The well-posedness of the closed-loop system is also proven. A simulation study is conducted to illustrate the theory.
more »
« less
- Award ID(s):
- 2302030
- PAR ID:
- 10665877
- Publisher / Repository:
- IEEE
- Date Published:
- Page Range / eLocation ID:
- 2426 to 2431
- Subject(s) / Keyword(s):
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract This paper presents dynamic design techniques—namely, continuous-time event-triggered control (CETC), periodic event-triggered control (PETC) and self-triggered control (STC)—for a class of unstable one-dimensional reaction-diffusion partial differential equations (PDEs) with boundary control and an anti-collocated sensing mechanism. For the first time, global exponential stability (GES) of the closed-loop system is established using a PDE backstepping control design combined with dynamic event-triggered mechanisms for parabolic PDEs—a result not previously achieved even under full-state measurement. When the emulated continuous-time backstepping controller is implemented on the plant using a zero-order hold, our design guarantees $$ L^{2} $$-GES through the integration of novel switching dynamic event triggers and a newly developed Lyapunov functional. While CETC requires the continuous monitoring of the triggering function to detect events, PETC only requires the periodic evaluation of this function. The STC design assumes full-state measurements and, unlike CETC, does not require continuous monitoring of any triggering function. Instead, it computes the next event time at the current event time using only full-state measurements available at the current event time and the immediate previous event time. Thus, STC operates entirely with event-triggered measurements, in contrast to CETC and PETC, which rely on continuous measurements. The well-posedness of the closed-loop systems under all three strategies is established, and simulation results are provided to illustrate the theoretical results.more » « less
-
This paper presents an observer-based event-triggered boundary control strategy for the one-phase Stefan problem, utilising the position and velocity measurements of the moving interface. The design of the observer and controller is founded on the infinite-dimensional backstepping approach. To implement the continuous-time observer-based controller in an event-triggered framework, we propose a dynamic event triggering condition. This condition specifies the instances when the control input must be updated. Between events, the control input is maintained constant in a Zero-Order-Hold manner. We demonstrate that the dwell-time between successive triggering moments is uniformly bounded from below, thereby precluding Zeno behaviour. The proposed event-triggered boundary control strategy ensures the wellposedness of the closed-loop system and the satisfaction of certain model validity conditions. Additionally, the global exponential convergence of the closed-loop system to the setpoint is established using Lyapunov approach. A simulation example is provided to validate the theoretical findings.more » « less
-
For stabilizing stop-and-go oscillations in traffic flow by actuating a variable speed limit (VSL) at a downstream boundary of a freeway segment, we introduce event-triggered partial differential equation (PDE) backstepping designs employing the recent concept of performance-barrier event-triggered control (P-ETC). Our design is for linearized hyperbolic Aw–Rascle–Zhang (ARZ) PDEs governing traffic velocity and density. Compared to continuous feedback, ETC provides a piecewise-constant VSL commands—more likely to be obeyed by human drivers. Unlike the existing “regular” ETC (R-ETC), which enforces conservatively a strict decrease of a Lyapunov function, our performance-barrier (P-ETC) approach permits an increase, as long as the Lyapunov function remains below a performance barrier, resulting in fewer control updates than R-ETC. To relieve VSL from continuously monitoring the triggering function, we also develop periodic event-triggered (PETC) and self-triggered (STC) versions of both R-ETC and P-ETC. These are referred to as R/P-PETC and R/P-STC, respectively, and we show that they both guarantee Zeno-free behavior and exponential convergence in the spatial L2 norm. With comparative simulations, we illustrate the benefits of the performance-barrier designs through traffic metrics (driver comfort, safety, travel time, fuel consumption). The proposed algorithms reduce discomfort nearly in half relative to driver behavior without VSL, while tripling the driver safety, measured by the average dwell time, relative to the R-ETC frequent-switching VSL schedule.more » « less
-
In this paper, we expand recently introduced observer-based periodic event-triggered control (PETC) and self-triggered control (STC) schemes for reaction–diffusion PDEs to boundary control of 2 × 2 coupled hyperbolic PDEs in canonical form and with anti-collocated measurement and actuation processes. The class of problem under study governs transport phenomena arising in water management systems, oil drilling, and traffic flow, to name a few. Relative to the state of the art of observer-based event-triggered control of hyperbolic PDEs, our contribution goes two steps further by proposing observer-based PETC and STC for the considered class of systems. These designs arise from a non-trivial redesign of an existing continuous-time event-triggered control (CETC) scheme. PETC and STC eliminate the need for constant monitoring of an event-triggering function as in CETC; PETC requires only periodic evaluations of the triggering function for event detection, whereas STC is a ‘‘predictor-feedback" that anticipates the next event time at the current event exploiting continuously accessible output measurements. The introduced resource-aware designs act as input holding mechanisms allowing for the update of the input signal only at events. Subject to the designed boundary output feedback PETC and STC control laws characterized by a set of event-trigger design parameters, the resulting closed-loop systems, which are inherently Zeno-free by design, achieve exponential convergence to zero in the spatial L2 norm. We illustrate the feasibility of the approach by applying the control laws to the linearized Saint-Venant model, which describes the dynamics of shallow water waves in a canal and is used to design flow stabilizers via gate actuation. The provided simulation results illustrate the proposed theory.more » « less
An official website of the United States government

