Title: Microstructure Informed Mechanical Properties and Chemomechanical Degradation of Battery Cathode Particles
Abstract BackgroundMechanical degradation of electrodes driven by electrochemical reactions limits battery performance and longevity. While various microstructures of LiNixMnyCozO2(NMC) cathodes have been developed, their comparative mechanical properties and chemomechanical degradation are unknown. ObjectiveThis study measures the mechanical properties of NMC cathode particles of three different microstructures: gravel-type NMC of large grains, gravel NMC of small grains, and rod-shaped NMC. Damage evolution in the NMC particles is simulated using finite element modeling. MethodsWe use flat punch indentation to measure the particle strength, contact modulus, and fracture energy of NMC particles of different microstructures. We also assess the effect of voids on the mechanical properties and damage generation in NMC particles upon cycles. ResultsThe particle strength dictated by grain boundaries is measured to be ~ 200 MPa in the three NMC microstructures. The contact modulus changes nonlinearly during mechanical load. The fracture energy of gravel NMC particles is ~ 0.5 J/m2. The presence of voids compromises the mechanical properties of NMC particles, but it helps delocalize stress within the particles and reduces damage generation upon electrochemical cycles. ConclusionsThe combined experiments and modeling provide a comprehensive analysis of the mechanical behaviors and their implications on chemomechanical degradation of NMC cathode particles of various microstructures.  more » « less
Award ID(s):
2325464 2325463
PAR ID:
10666426
Author(s) / Creator(s):
; ; ;
Publisher / Repository:
Springer
Date Published:
Journal Name:
Experimental Mechanics
ISSN:
0014-4851
Subject(s) / Keyword(s):
Sponsoring Org:
National Science Foundation
More Like this
  1. A concentration-gradient composition is proposed as an effective approach to solve the mechanical degradation and improve the electrochemical cyclability for cathodes of sodium-ion batteries. Concentration-gradient shell NaxNiyMn1-yFe(CN)6·nH2O, in which the Ni content gradually increases from the interior to the particle surface, is synthesized by a facile co-precipitation process. The as-obtained cathode exhibits an improved electrochemical performance compared to homogeneous NaxMnFe(CN)6·nH2O, delivering a high reversible specific capacity of 110 mA h g-1 at 0.2 C and outstanding cycling stability (93% retention after 1000 cycles at 5 C). The improvement of electrochemical performance can be attributed to its robust microstructure that effectively alleviates the electrochemically induced stresses and accumulated damage during sodiation/desodiation and thus prevents the initiation of fracture in the particles upon long term cycling. These findings render a prospective strategy to develop high-performance electrode materials for sodium-ion batteries. 
    more » « less
  2. A concentration-gradient composition is proposed as an effective approach to solve the mechanical degradation and improve the electrochemical cyclability for cathodes of sodium-ion batteries. Concentration-gradient shell NaxNiyMn1-yFe(CN)6·nH2O, in which the Ni content gradually increases from the interior to the particle surface, is synthesized by a facile co-precipitation process. The as-obtained cathode exhibits an improved electrochemical performance compared to homogeneous NaxMnFe(CN)6·nH2O, delivering a high reversible specific capacity of 110 mA h g-1 at 0.2 C and outstanding cycling stability (93% retention after 1000 cycles at 5 C). The improvement of electrochemical performance can be attributed to its robust microstructure that effectively alleviates the electrochemically induced stresses and accumulated damage during sodiation/desodiation and thus prevents the initiation of fracture in the particles upon long term cycling. These findings render a prospective strategy to develop high-performance electrode materials for sodium-ion batteries. 
    more » « less
  3. Abstract Interphase layers that form at contact points between the solid electrolyte (SE) and cathode active material in solid‐state lithium‐ion batteries (SS‐LIBs) increase cell impedance, but the mechanisms for this interphase formation are poorly understood. Here, we demonstrate a simple workflow to study cathode–electrolyte interphase (CEI) formation using 4D‐scanning transmission electron microscopy (4D‐STEM) that does not require SS‐LIB assembly. We show benefits of MoCl5:EtOH as a chemical delithiating agent, and prepare chemically delithiated cathode LiNi0.6Co0.2Mn0.2O2(NMC) powder in contact with Li10GeP2S12(LGPS) SE powder as a SS‐LIB CEI surrogate. We map the composition and structure of the CEI layers using 4D‐STEM, energy dispersive X‐ray spectroscopy (EDS), and electron pair distribution function analysis (ePDF). EDS indicates O migration from NMC into LGPS. ePDF analysis indicates sulfate and phosphate formation localized on the surface of LGPS, as well as Li2O formation within the LGPS phase, and self‐decomposition of NMC. These results are consistent with an electrochemical self‐discharge mechanism for interphase formation arising from coupled redox reactions of sulfur oxidation in LGPS and transition metal reduction in NMC. This suggests that coatings which stop anion transport but allow Li+and e−transport may prevent interphase formation and reduce impedance in SS‐LIBs. 
    more » « less
  4. Aqueous Li-ion batteries (ALIBs) are an important class of battery chemistries owing to the intrinsic non-flammability of aqueous electrolytes. However, water is detrimental to most cathode materials and could result in rapid cell failure. Identifying the degradation mechanisms and evaluating the pros and cons of different cathode materials are crucial to guide the materials selection and maximize their electrochemical performance in ALIBs. In this study, we investigate the stability of LiFePO4(LFP), LiMn2O4(LMO) and LiNi0.8Mn0.1Co0.1O2(NMC) cathodes, without protective coating, in three different aqueous electrolytes, i.e., salt-in-water, water-in-salt, and molecular crowding electrolytes. The latter two are the widely reported “water-deficient electrolytes.” LFP cycled in the molecular crowding electrolyte exhibits the best cycle life in both symmetric and full cells owing to the stable crystal structure. Mn dissolution and surface reduction accelerate the capacity decay of LMO in water-rich electrolyte. On the other hand, the bulk structural collapse leads to the degradation of NMC cathodes. LMO demonstrates better full-cell performance than NMC in water-deficient aqueous electrolytes. LFP is shown to be more promising than LMO and NMC for long-cycle-life ALIB full cells, especially in the molecular crowding electrolyte. However, none of the aqueous electrolytes studied here provide enough battery performance that can compete with conventional non-aqueous electrolytes. This work reveals the degradation mechanisms of olivine, spinel, and layered cathodes in different aqueous electrolytes and yields insights into improving electrode materials and electrolytes for ALIBs. 
    more » « less
  5. Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) is a promising inorganic solid electrolyte due to its high Li + conductivity and electrochemical stability for all-solid-state batteries. Mechanical characterization of LLZTO is limited by the synthesis of the condensed phase. Here we systematically measure the elastic modules, hardness, and fracture toughness of LLZTO polycrystalline pellets of different densities using the customized environmental nanoindentation. The LLZTO samples are sintered using the hot-pressing method with different amounts of Li 2 CO 3 additives, resulting in the relative density of the pellets varying from 83% to 98% and the largest grain size of 13.21 ± 5.22 μm. The mechanical properties show a monotonic increase as the sintered sample densifies, elastic modulus and hardness reach 158.47 ± 10.10 GPa and 11.27 ± 1.38 GPa, respectively, for LLZTO of 98% density. Similarly, fracture toughness increases from 0.44 to 1.51 MPa⋅m 1/2 , showing a transition from the intergranular to transgranular fracture behavior as the pellet density increases. The ionic conductivity reaches 4.54 × 10 −4 S/cm in the condensed LLZTO which enables a stable Li plating/stripping in a symmetric solid-state cell for over 100 cycles. This study puts forward a quantitative study of the mechanical behavior of LLZTO of different microstructures that is relevant to the mechanical stability and electrochemical performance of all-solid-state batteries. 
    more » « less