Abstract Levees are built to safeguard human lives, essential infrastructure, and farmland. However, failure of levees can have catastrophic impacts due to a fast rate of inundation in areas protected by levees. Earthen levees are prone to failure due to excessive moisture content that reduces the shear strength of the soil. The use of levee monitoring systems has demonstrated the ability to reduce the likelihood of failure by creating maps that depict the saturation levels of the surface of the levee, both in terms of space and time. By utilizing extensive sensor networks to continuously monitor these geo-infrastructure systems, the structural deterioration attributed to changing climate can be studied. Measuring environmental parameters surrounding such structures provides insight into the potential stressors that cause structural failure. Steps can then be taken to mitigate those effects on the levees and maintain structural integrity. However, the massive scale of levees makes it difficult to monitor with conventional wired sensors. This paper presents a preliminary investigation into the development and validation of UAV-deployable smart sensing spikes for soil conductivity levels in levees, which is a measurement modality for determining soil saturation levels. For this work, Gaussian process regression (also known as kriging) is used to model the soil saturation levels between sensing spikes obtaining a continuous moisture map of the levees. The expanded data is then categorized using a clustering-based machine learning approach with conductivity data from sensing spikes as model inputs. The machine learning model output is sorted into three categories: dry, partially saturated, and saturated soil. The findings of a laboratory study are presented, and the implications of the raw and expanded data are discussed. This work will aid in predicting potential levee failure risks and maintenance requirements based on the analysis of the soil conditions using a network of smart sensing spikes.
more »
« less
Self-Contained Electrical Conductivity Sensing Spikes for Monitoring of Levee Wetting and Drying Cycles
Abstract Levees are earthen structures built parallel to water bodies, such as rivers, to protect important infrastructure, assets, and people from flooding. They play a critical role in protecting lives, but their structural integrity is frequently threatened by lack of maintenance leading to moisture-induced degradation. Traditional levee monitoring systems can be expensive due to the need for extensive sensor networks across vast areas. To address this, there is a growing need for low-cost sensing solutions that can provide data without requiring dense sensor coverage. Direct measurements of subsurface parameters, such as soil saturation levels, are helpful for accurately assessing the structural health of levees, as these measurements provide real-time insights into the moisture conditions that can weaken soil strength and lead to potential failures. This study investigates the application of newly developed self-contained sensing spikes, equipped with electrical conductivity sensors that embed themselves 13 cm below the surface, designed to monitor wetting and drying cycles within levee soils. In a controlled and monitored 144-hour flume test, six spikes were strategically placed on a 0.45-meter-high sand embankment as water levels were raised and lowered to capture conductivity changes over time. Using the B-spline method, a map of conductivity was constructed, providing a graphical representation of moisture distribution across the levee. This non-linear mapping technique allows for accurate detection of moisture-driven faults with significantly fewer sensors, demonstrating that under-sampling can achieve reliable monitoring results. The embedded conductivity sensors enable continuous, low-cost monitoring of moisture dynamics directly at critical depths, offering a novel approach to detecting levee faults and predicting potential bank erosion. By linking conductivity data to fragility assessments, this method enhances the ability to forecast structural vulnerabilities, contributing to improved levee resilience and maintenance strategies under changing environmental conditions.
more »
« less
- PAR ID:
- 10669705
- Publisher / Repository:
- American Society of Mechanical Engineers
- Date Published:
- Subject(s) / Keyword(s):
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Levees play a critical role in safeguarding communities and assets from flooding, acting as essential defenses against the devastating impacts of inundation. Yet, earthen levees are prone to breaches, especially in the face of swift floodwaters. Distributed low-cost sensor networks offer the potential to generate spatial maps illustrating soil moisture levels. Long-term monitoring of these spatial maps could identify vulnerable zones in the levee while providing an understanding of how climate change affects levee stability. This study presents an investigation into spatial monitoring of soil saturation in levees using a wireless network of UAV-deployable sensing spike packages. The goal of this paper is to demonstrate the use of these sensors for assessing soil conductivity levels in sand-filled embankments. The obtained soil conductivity levels are crucial for determining soil saturation. The developed sensing spikes consist of a spike that penetrates the ground and measures conductivity between two electrically conductive contacts. The sensing spike consists of microprocessors for edge computing, and wireless data communication systems that report data to a way station in real-time. To validate the efficacy of the developed sensors, a flume test is developed as a replica of a levee and monitored under controlled water flow conditions. The analysis of data at different times revealed the progression of moisture throughout the earthen embankment. Initially, the soil is almost dry. As the controlled water flow proceeds, the soil becomes partially saturated, with the final stage showing a dominant presence of saturated soil. The collected data sampled at the measurement points is expanded to a continuous moisture profile using kriging. Gaussian kriging, also known as ordinary kriging, is one of the commonly used variants of the kriging method. In Gaussian kriging, the estimation of values at unsampled locations is based on a linear combination of nearby data points, with weights determined by their spatial relationships. The Gaussian assumption implies that the errors in the estimation process follow a normal distribution. The extended knowledge about saturation levels obtained through kriging can lead to insights for predicting vulnerable areas and preempting potential failures. Overall, this study paves the way for further development of a wireless network of sensing spike packages as a UAV-deployable system for levee health assessment and improved infrastructure management.more » « less
-
Continuous monitoring of soil nitrate levels is essential for effective soil nutrient management. However, limited soil pore water at low soil water content levels hinders miniaturized soil sensor surfaces from efficiently interacting with nutrient ions. To address this, we introduce a nanofibrous mat designed to enhance nitrate detection by increasing connectivity between miniature sensors and the soil solution. Composed of polysulfone, polymethylmethacrylate, and polyvinyl alcohol, this mat is fabricated using electrospinning and electrospray methods to balance water absorbency, mechanical durability, and ease of manufacturing. When wrapped around an ion-selective electrode-based nitrate sensor, the mat improves access to soil pore water, acts as a filter, prevents direct sensor-soil particle contact, and reduces the impact of soil particle surface charges on sensor measurements. Continuous nitrate monitoring with both mat-wrapped and bare sensors was conducted in controlled and field environments. Linear regression analysis indicates that the mat-wrapped sensor has a stronger correlation with conventional salt extract methods for measuring soil nitrate levels. T-tests confirm statistically significant differences between sensor measurements and the salt extraction method. Additionally, Bland-Altman analysis reveals that mat-wrapping reduces mean bias and narrows the limits of agreement, demonstrating improved agreement with the conventional method. Notably, the mat-wrapped sensor performs consistently across varying soil moisture conditions. These findings suggest that the water-absorbing mat improves the ability of the sensor to monitor nitrate continuously by accommodating varying soil moisture levels over time, making the mat-wrapped soil nitrate sensor a viable improvement for in-field measurements of soil solution chemistry.more » « less
-
Levees and embankments are important infrastructure for protecting industrial, commercial, residential, and agricultural regions from flooding. As global temperatures increase due to climate change, flooding is expected to become more severe in the future. As flooding occurs more often with higher levels and streamflow, levee structures face a greater risk from events exceeding prior design expectations. Existing monitoring technologies either focus on discrete or continuous measurements with complicated installation, which is a challenge in large-scale implementation. Therefore, it is of interest to develop a levee monitoring system to effectively implement on a large scale for assessing and maintaining the levee condition under extreme events. This presentation includes preliminary research on a novel embeddable passive radio frequency (RF) sensing system and its applicability in levee monitoring applications. Previous studies have demonstrated the sensing system’s ability to detect changes in displacement and water content. This study focuses on implementation challenges, particularly the use of a distant exciter to power passive RF sensors. The exciter is expected to be carried by unmanned aerial vehicles (UAV), positioned a few meters from the levee surface. Controlled laboratory experiments are conducted to analyze the exciter’s effects. The main challenge of this research includes replicating the potential trajectory of the exciter and identifying the influence of the exciter’s position on the system performance. The results demonstrate the impact of the exciter’s position on the collected data. These findings demonstrate the feasibility of the RF sensing system for levee monitoring while addressing the challenges associated with UAV-mounted exciters. By further investigating and addressing these challenges, the system can be made a step closer to real-world implementations.more » « less
-
The structural capacity of pavement foundation is altered by moisture conditions. Reliable moisture monitoring of geomaterials throughout pavement service life is critical for asset management by transportation agencies. Improved moisture sensing enables transportation officials and practitioners to better understand performance of complex recycled materials under frequent extreme rain events. Although moisture sensing for geomaterials has improved significantly, there are still challenges when using sensors in recycled materials that may contain unhydrated cement, aged asphalt, or both. Challenges include the development of calibration functions that account for the presence of recycled materials and robust installation procedures, as technology was developed mostly for agricultural practices. In this study, a series of experiments were conducted to suggest improvements for installation techniques and data interpretation of soil moisture and water potential sensors. Suggested installation guidelines minimize wash-out and erosion potential at the soil–sensor interface. Experimental results indicate a strong bilinear relation between dielectric of recycled materials and water content, with a region of relatively small change governed by dielectric permittivity of air and a region of rapid change controlled by dielectric permittivity of water. Moreover, it was found that dielectric permittivity is not significantly affected by aggregate internal structure as dielectric for a specific moisture content for different compaction degrees is relatively similar. Furthermore, soil water characteristic curves obtained using the water potential sensor and improved installation technique compare reasonably well with laboratory results obtained with traditional equipment. Reliability of both moisture and water potential sensors was improved with the suggested guidelines.more » « less
An official website of the United States government

