An official website of the United States government
SUMMARY Understanding the temporal changes of the Earth’s magnetic field intensity is one of the main goals of modern palaeomagnetism. For most palaeointensity methods to yield reliable results, the magnetic minerals must obey a set of rules. One of these rules is the additivity of partial thermal (TRM) or anhysteretic remanent magnetizations (ARM). Additivity was previously shown for partial TRM in single-domain particles and more generally for ARMs. Additivity between these two low-field remanences, however, has not been investigated, yet. This paper presents a series of rock magnetic experiments on natural low Ti titanomagnetites (Curie temperature between 534 °C and 561 °C) examining the effects of high temperatures on alternating field (AF) demagnetization and acquisition of an ARM. One of our sample sets comes from a borehole drilled through the impact melt sheet of the Manicouagan crater (Canada), the other from the Rocche Rosse lava flow on the island of Lipari (Italy). Hysteresis parameters indicate the magnetic carriers in the pseudo-single-domain range showing no evidence for oxidation. Thermal demagnetization at 300 °C and 500 °C before AF demagnetization shifts the coercivity spectra towards higher fields. AF demagnetization experiments at 500 °C show a significant (by a factor between 1.4 and >7.6) reduction in median destructive field and a shift towards lower coercivities. A linear relationship was found between the peak magnetic field required to demagnetize a fraction of a full TRM of a sample at a specific temperature and the one necessary to demagnetize the same fraction at room temperature after heating to that temperature. The comparison of full ARM and partial TRM at successively higher temperatures with a hybrid hTARM reveals that combined additivity between the two kinds of remanences is fulfilled. These results open the possibility to demagnetize highly coercive minerals, such as hematite and goethite, which is often not achievable at elevated temperatures. Furthermore, the additivity of TRM and ARM remanences may be used to develop novel hybrid TRM/ARM palaeointensity methods for samples, where heating is problematic (e.g. in meteorites).
more »
« less
This content will become publicly available on March 1, 2027
Non-Tensorial Anhysteretic Remanent Anisotropy and the Detection of Composite Fabrics
Abstract The anisotropy of anhysteretic remanent magnetization (AARM) provides a powerful, nondestructive means of assessing magnetic fabrics. It is widely applied to infer strain and emplacement conditions in sedimentary, volcanic, and intrusive rocks. AARM is generally represented by a symmetric second-rank tensor describing its orientation, strength, and shape. AARM, however, departs from a tensorial shape when the number of grains carrying each directionally imparted anhysteretic remanence (ARM) varies with ARM orientation – a condition that arises when the alternating field (AF) over which the ARM is imparted does not fully activate the sample. Experimental data from a highly anisotropic ignimbrite sample, together with multiparticle modeling, show that such partial activation produces non-tensorial AARMs. Although this behavior complicates tensor analysis, non-tensorial AARM can reveal superimposed fabrics, provided that users can apply AF and ARM in a broad range of orientations. This article presents theoretical models that demonstrate non-tensorial behavior and explains how to utilize these properties to discern superimposed fabrics in natural samples.
more »
« less
- Award ID(s):
- 2153786
- PAR ID:
- 10671824
- Publisher / Repository:
- Springer Nature
- Date Published:
- Journal Name:
- Studia Geophysica et Geodaetica
- Volume:
- 70
- Issue:
- 1
- ISSN:
- 0039-3169
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Eddy viscosity is employed throughout the majority of numerical fluid dynamical models, and has been the subject of a vigorous body of research spanning a variety of disciplines. It has long been recognized that the proper description of eddy viscosity uses tensor mathematics, but in practice it is almost always employed as a scalar due to uncertainty about how to constrain the extra degrees of freedom and physical properties of its tensorial form. This manuscript borrows techniques from outside the realm of geophysical fluid dynamics to consider the eddy viscosity tensor using its eigenvalues and eigenvectors, establishing a new framework by which tensorial eddy viscosity can be tested. This is made possible by a careful analysis of an operation called tensor unrolling, which casts the eigenvalue problem for a fourth‐order tensor into a more familiar matrix‐vector form, whereby it becomes far easier to understand and manipulate. New constraints are established for the eddy viscosity coefficients that are guaranteed to result in energy dissipation, backscatter, or a combination of both. Finally, a testing protocol is developed by which tensorial eddy viscosity can be systematically evaluated across a wide range of fluid regimes.more » « less
-
Abstract Paleomagnetism relies4 on stable remanent magnetizations held in rocks to reconstruct the ancient geomagnetic field direction and intensity. However, rocks may carry secondary overprints that obscure or completely destroy the original signal. To study the stability of the magnetic vector(s), laboratories routinely apply static alternating field demagnetization along three orthogonal axes (AFD₃), which is fast, non-destructive, and easy to automate. Here, we present a multiparticle model that shows AFD₃ can deviate the natural remanent magnetization (NRM). Deviations can be avoided when fulfilling two conditions: (i) the NRM was acquired in a weak field where magnetization intensity varies linearly with field strength, and (ii) the sample is magnetically isotropic. The first condition is generally satisfied for rocks holding thermal or detrital remanent magnetizations, but not those affected by an isothermal remanence (e.g., lightning), even though AFD₃ is often used to remove them. In rocks with an anisotropic particle orientation distribution, stepwise AFD₃ progressively removes different coercivity subpopulations as a function of grain orientation so the effective remanence anisotropy of the surviving carriers changes during demagnetization. The anisotropy-driven deflection therefore evolves with AF step, producing curvilinear demagnetization trajectories. Our theoretical results argue for caution when applying AFD₃ to anisotropic samples or those with isothermal overprints. Undesired NRM rotation can be avoided by tumble demagnetization or mitigated by increasing the number of alternating field axis orientations.more » « less
-
A<sc>bstract</sc> We study local, higher-spin conserved currents in integrable 2dsigma models that have been deformed via coupling to auxiliary fields. These currents generate integrability-preserving flows introduced by Smirnov and Zamolodchikov. For auxiliary field (AF) deformations of a free boson, we prove that local spin-ncurrents exist for allnand give recursion relations that characterize Smirnov-Zamolodchikov (SZ) flows driven by these currents. We then show how to construct spin-2ncurrents in a unified class of auxiliary field sigma models with common structure — including AF theories based on the principal chiral model (PCM), its non-Abelian T-dual, (bi-)Yang-Baxter deformations of the PCM, and symmetric space models — for interaction functions of one variable, and describe SZ flows driven by any function of the stress tensor in these cases. Finally, we give perturbative solutions for spin-3 SZ flows in any member of our unified class of AF models with underlying$$ \mathfrak{su} $$ (3) algebra. Part of our analysis shows that the class of AF deformations can be extended by allowing the interaction function to depend on a larger set of variables than has previously been considered.more » « less
-
We consider an immersed elastic body that is actively driven through a structured fluid by a motor or an external force. The behavior of such a system generally cannot be solved analytically, necessitating the use of numerical methods. However, current numerical methods omit important details of the microscopic structure and dynamics of the fluid, which can modulate the magnitudes and directions of viscoelastic restoring forces. To address this issue, we develop a simulation platform for modeling viscoelastic media with tensorial elasticity. We build on the lattice Boltzmann algorithm and incorporate viscoelastic forces, elastic immersed objects, a microscopic orientation field, and coupling between viscoelasticity and the orientation field. We demonstrate our method by characterizing how the viscoelastic restoring force on a driven immersed object depends on various key parameters as well as the tensorial character of the elastic response. We find that the restoring force depends non-monotonically on the rate of diffusion of the stress and the size of the object. We further show how the restoring force depends on the relative orientation of the microscopic structure and the pulling direction. These results imply that accounting for previously neglected physical features, such as stress diffusion and the microscopic orientation field, can improve the realism of viscoelastic simulations. We discuss possible applications and extensions to the method.more » « less
