skip to main content
US FlagAn official website of the United States government
dot gov icon
Official websites use .gov
A .gov website belongs to an official government organization in the United States.
https lock icon
Secure .gov websites use HTTPS
A lock ( lock ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


Title: Magnetically Recoverable and Adsorptive Alginate Hydrogel Composite Beads Reinforced with Cellulose Nanocrystals
The World Health Organization estimates that approximately 1.9 million deaths occur annually due to the consumption of contaminated drinking water, underscoring the urgent need for sustainable, biobased materials for water purification. This study reports the synthesis and characterization of magnetically responsive, alginate-based hydrogels designed for pollutant adsorption and magnetic recovery. Magnetic cellulose nanocrystals (mCNC) were produced by coprecipitating Fe3O4 nanoparticles onto cellulose nanocrystals (CNCs) and subsequently embedded into an alginate hydrogel matrix at two loading concentrations (0.1 and 1% w/v). The resulting mCNC–alginate hydrogels, along with CNC–alginate and pure alginate hydrogels as controls, were fabricated in both thin film and bead forms. A comprehensive characterization was performed to evaluate the structural, magnetic, and mechanical properties. Scanning electron microscopy (SEM) revealed changes in surface morphology and pore structure, while Fourier transform infrared spectroscopy (FT-IR) confirmed chemical compatibility. Vibrating sample magnetometry (VSM) demonstrated superparamagnetic behavior of mCNC-loaded hydrogels, with a saturation magnetization of 9.85 emu/g for the 1% mCNC sample. Rheological characterization showed that CNC and mCNC incorporation significantly enhanced hydrogel rigidity and storage modulus, although no significant magnetorheological response was observed. Adsorption performance was evaluated using methylene blue (MB) as a model pollutant, given its relevance to the removal of persistent contaminants, such as per- and polyfluoroalkyl substances (PFAS). While pure alginate beads achieved the highest maximum adsorption capacity (1357 mg/g), CNC- and mCNC-loaded hydrogels demonstrated improved percent removal at intermediate concentrations. Kinetic modeling indicated that adsorption followed both the pseudo-first-order (PFO) and fractal-like pseudo-first-order (FL-PFO) models, consistent with a physisorption process influenced by diffusion limitations. These results highlight the potential of mCNC–alginate hydrogels as scalable, magnetically retrievable, and environmentally benign materials for advanced water purification. Their enhanced mechanical stability, tunable magnetic properties, and biobased composition make them promising candidates for sustainable water treatment technologies.  more » « less
Award ID(s):
2216191
PAR ID:
10673037
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
ACS Publications
Date Published:
Journal Name:
ACS Applied Engineering Materials
Volume:
3
Issue:
11
ISSN:
2771-9545
Page Range / eLocation ID:
3976 to 3987
Subject(s) / Keyword(s):
Adsorption Biopolymers Hydrogels Magnetic properties Nanoparticles
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; ; ; ; ; ; et al (, Small)
    ABSTRACT Strong underwater‐setting adhesives hold transformative potential for tissue repair, yet achieving a combination of high adhesive strength, toughness, energy dissipation, and biocompatibility remains a critical challenge. To address this, we engineered a protein–cellulose composite hydrogel composed of microbially‐produced hybrid proteins that incorporate silk, amyloid, and mussel foot protein (SAM) domains with polydopamine (PDA)‐functionalized cellulose nanocrystals (CNCPDA). The PDA coating enables robust interfacial interactions between the CNC nanofillers and the SAM protein matrix, dramatically enhancing mechanical performance. Hydrogels containing 10% CNCPDAachieved a tensile strength of 4.9 ± 0.9 MPa, strain of 770% ± 33%, toughness of 17 MJ/m3, and damping energy of 202 ± 35 kJ/m3—representing 4.7‐, 2‐, 3.6‐, and ninefold increases, respectively, compared to the unreinforced SAM hydrogel. Pre‐stretching further aligned CNCPDAnanofillers within the matrix, enabling tunable enhancement in tensile modulus and ultimate strength. Critically, the composite hydrogels demonstrated strong adhesion to biological tissues, with adhesive strengths of 0.88 ± 0.25 MPa on porcine skin and 1.1 ± 0.3 MPa on bovine bone, far exceeding clinical thresholds for mechanical‐demanding tissue adhesives, while maintaining biocompatibility. This synergistic integration of programmable protein design and functionalized nanomaterials provides a versatile platform for next‐generation bioadhesives, addressing key unmet needs in bone repair and regenerative medicine. 
    more » « less
  2. ; ; ; (, Ecotoxicology and environmental safety)
    In this study, an eco-friendly and novel hydrogel based on a crosslinked polyvinyl alcohol (PVA), iota carrageenan (IC) and polyvinylpyrrolidone (PVP) scaffold, containing a large amount (10–50 wt%) of nanoscale palm fronds (NPF) as additives, for water purification was demonstrated. A life cycle assessment (LCA) findings on NPF as biomass waste incorporated into PVA_PVP_IC polymer matrix was presented, and the results highlight the necessity of focused actions to reduce environmental impact and support the palm waste utilization in a sustainable manner. The multicomponent nanocomposite hydrogels were examined as adsorbents in a system work in batches for methylene blue (MB) and paracetamol (PCT) removal. The results show that, the presence of NPF, which dispersed in the hydrogel PVA_PVP_IC scaffolds containing both covalent and non-covalent cross-linking bonds, greatly enhanced the MB and PCT adsorption efficiency. A response surface methodology (RSM) model was used to find the best operating parameters of contaminant adsorption, including time, adsorbent dose, and starting concentration of pollutants. By using this statistical model, it was found that the optimal conditions for the adsorption reaction to achieve the complete removal of MB are 66.7 h adsorption time duration, 98.5 mg/L starting concentration, and an adsorbent dose of 5.9 mg, while for the complete removal of PCT, it is 57.6 h adsorption time duration, 80 mg/L starting concentration, and an adsorbent dose of 6 mg. The reusability of the nanocomposite hydrogels were tested for 5 cycles, all showed high adsorption capacity, indicating the potential for practical application of this nanocomposite hydrogel system. This study indicates that the prepared nanocomposite hydrogel raises the standard used for treatment of wastewater and also gives a solution to protect the environment and mitigate global warming. 
    more » « less
  3. ; ; ; ; (, Journal of Molecular Liquids)
    Cellulose-polyethyleneimine (PEI) composite has been widely used in water remediation. However, most of these composites are synthesized using chemical cross-linkers, which usually cause secondary contamination and extra cost. To address these issues, a stable TEMPO-oxidized cellulose nanofibril (TCNF)-PEI composite hydrogel (TCNF/PEI) was synthesized through self-assembly mechanisms involving cationic chelation and physical adsorption. These hydrogels were tested for the removal of methyl blue and Cu (II) ions -used as model emerging contaminants- from aqueous solutions. Interactions of the hydrogels with methyl blue dyes and Cu (II) ions were pH dependent. Interestingly, methyl blue dye removal using these hydrogels occurred through both adsorption and precipitation phenomena. Between the pH values of 3.7 and 5.7, most of the dyes were removed by adsorption, obtaining the highest adsorption efficiency (88.3 %) at pH 4.7. At pH of 2.7, these hydrogels promoted rapid precipitation of methyl blue removing up to 91.5 % after 6 h of exposure. Importantly, the structure of precipitated methyl blue dyes remained unchanged as demonstrated by FTIR and XRD, indicating the potential use of this technology on the recovery of reusable methyl blue dyes from wastewater. However, Cu (II) can only be removed by adsorption at pH range from 4 to 8, with an efficiency up to 72.6 % at pH 8. FTIR and XPS analysis revealed that the adsorption mechanism of methyl blue is mainly driven by electrostatic attraction and hydrogen bonding, while Cu (II) removal occurs mainly through electrostatic attraction and coordination. These processes are primarily governed by interactions between the nitrogen and oxygen-containing groups in the hydrogel and the contaminants. This work sheds light on the fundamental understanding of TCNF/PEI hydrogels and their potential for removal emerging contaminants such as anionic dyes and heavy metal ions from industrial wastewater. 
    more » « less
  4. ; (, Nanomaterials)
    Ensuring clean water sources is pivotal for sustainable development and the well-being of communities worldwide. This study represents a pioneering effort in water purification, exploring an innovative approach utilizing modified reduced graphene oxide (rGO) aerogels. These advanced materials promise to revolutionize environmental remediation efforts, specifically removing organic contaminants from aqueous solutions. The study investigates the exceptional adsorption properties of rGO-aerogel, enhanced with cysteamine, to understand its efficacy in addressing water pollution challenges. The characterization methods utilized encompass various analytical techniques, including FE-SEM, BET, FTIR, TGA, DSC, XPS, NMR, and elemental analysis. These analyses provide valuable insights into the material’s structural modifications and surface chemistry. The research comprehensively explores the intricacies of adsorption kinetics, equilibrium, and isothermal study to unravel the underlying mechanisms governing contaminant removal. MO and Ni2+ exhibited adsorption of 542.6 and 150.6 mg g−1, respectively, at 25 °C. Ni2+ has unveiled the highest removal at pH 5, and MO has shown high removal in a wide pH range (pH 4–7). Both contaminants have shown fast adsorption kinetic performance on an rGO-aerogel surface. This study aims to identify the synergistic effect of cysteamine and rGO in aerogel formation to remove heavy metals and organic contaminants. These findings mark a significant stride in advancing sustainable water-treatment methods and pioneering in synthesizing innovative materials with versatile applications in environmental contexts, offering a potential solution to the global water pollution crisis. 
    more » « less
  5. ; ; (, Desalination and water treatment)
    Modern industrial waste waters often contain high concentrations of phosphate, and many methods have been explored to aid in its removal. This study investigates the use of magnetic nanoparticles as an adsorbent for phosphate removal. Aluminum-doped magnetic nanoparticles were synthesized using a co-precipitation method. Structure and composition analysis of the prepared magnetic nanoparticles indicated an inverse spinal structure with a composition of FeAl0.75Fe1.25O4. These nanoparticles were tested for their phosphate removal properties, including adsorption capacity, selectivity, and kinetic models. They showed great affinity to phosphate with a maximum adsorption capacity of 102 mg/g. Additionally, the adsorption was selective, and the presence of other common anions and organic matters did not interfere with the phosphate adsorption efficacy. The kinetic analysis of phosphate adsorption suggested a pseudo-second-order adsorption behavior, and the adsorption isotherm studies indicated a Langmuir type adsorption. The phosphate removal capabilities of the nanoparticles were also tested in poultry rinsing water, tap water, and municipal wastewaters, all with high phosphate removal efficiency. The overall results from these experiments showed promising results for the phosphate removal efficacy of these nanoparticles. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email