Title: SOS: Snow Pit Data. Version 1.0
Snow Pit data acquired from manual snow pits following protocols and symbology from the International Classification for Snow on the Ground (see document attached titled IntClassificationSnowOnGround.pdf) collected during the Sublimation of Snow (SOS) field project. Snow pits were dug approximately every 24 to 48 hours from 6 January to 16 March 2023. The main measurements taken from each snow pit included total snow depth, surface temperature, snow temperature (every 10 cm), snow density (10 cm average), snow crystal size, snow crystal type, and layer hardness. See the readme file for more detail.  more » « less
Award ID(s):
2139836
PAR ID:
10673207
Author(s) / Creator(s):
; ; ; ;
Publisher / Repository:
NSF NCAR Earth Observing Laboratory
Date Published:
Edition / Version:
1.0
Subject(s) / Keyword(s):
Format(s):
Size: 3 data files; 2 ancillary/documentation files; 4 MiB Other: NetCDF: Network Common Data Form (application/x-netcdf); PDF: Portable Document Format (application/pdf)
Size(s):
3 data files 2 ancillary/documentation files 4 MiB
Sponsoring Org:
National Science Foundation
More Like this
  1. Soil sampling pits across three hillslope positions - toeslope, backslope, and summit - were dug in 2020 in watershed N4D (burned every 4 years) and N1D (burned annually) to characterize the impacts of woody encroachment on subsurface soil physical, chemical, and biological properties. Pits were hand-dug to 120 cm in the toeslope position and to 60 cm deep at the backslope and summit positions. Soil pits in N4D were dug directly under dogwood shrubs (Cornus drumondii) while pits in N1B were dug under grasses and forbs. Soil pit faces were photographed to determine root fractions with depth,  soil monoliths were take to charaterize soil macroporosity with depth while soil cores were taken in each horizon for water retention analysis.  Soil sensors were also installed at four soil depths at the toeslope position and 3 soil depths at the backslope and summit positions to record half hourly soil moisture, soil temperature, soil water potential, soil electrical conductivity, and soil carbon dioxide, and soil oxygen. In addition, geophysical measurements were taken in N4D using time-lapse electrical resistivity. 
    more » « less
  2. Soil sampling pits across three hillslope positions - toeslope, backslope, and summit - were dug in 2020 in watershed N4D (burned every 4 years) and N1D (burned annually) to characterize the impacts of woody encroachment on subsurface soil physical, chemical, and biological properties. Pits were hand-dug to 120 cm in the toeslope position and to 60 cm deep at the backslope and summit positions. Soil pits in N4D were dug directly under dogwood shrubs (Cornus drumondii) while pits in N1B were dug under grasses and forbs. Soil pit faces were photographed to determine root fractions with depth,  soil monoliths were take to charaterize soil macroporosity with depth while soil cores were taken in each horizon for water retention analysis.  Soil sensors were also installed at four soil depths at the toeslope position and 3 soil depths at the backslope and summit positions to record half hourly soil moisture, soil temperature, soil water potential, soil electrical conductivity, and soil carbon dioxide, and soil oxygen. In addition, geophysical measurements were taken in N4D using time-lapse electrical resistivity in 2023. 
    more » « less
  3. Abstract: Soil pits were excavated in 2023 across contrasting hillslopes in Watershed 10 at the H.J. Andrews Experimental Forest (LTER), Oregon, USA, to investigate how differences in subsurface water-storage capacity influence plant-accessible water, hydraulic redistribution, and associated soil physical, chemical, and biological properties in a second-growth Douglas-fir (Pseudotsuga menziesii)–dominated forest (~500 m elevation). The watershed receives >2000 mm annual precipitation, primarily as winter rainfall. Soil pits were hand-dug to ~100 cm, and bulk soil was sampled by horizon for physical and chemical analyses; intact cores were collected for soil water retention measurements. Pit-face photographs were used to quantify rooting distributions with depth. Each pit was instrumented with zero-tension lysimeters at two depths for bulk soil-water chemistry and with in situ sensors measuring volumetric water content, temperature, and electrical conductivity (multiple depths), soil CO2 (two depths), and soil water potential (one depth). 
    more » « less
  4. Abstract: Soil pits were excavated in 2023 across contrasting hillslopes in Watershed 10 at the H.J. Andrews Experimental Forest (LTER), Oregon, USA, to investigate how differences in subsurface water-storage capacity influence plant-accessible water, hydraulic redistribution, and associated soil physical, chemical, and biological properties in a second-growth Douglas-fir (Pseudotsuga menziesii)–dominated forest (~500 m elevation). The watershed receives >2000 mm annual precipitation, primarily as winter rainfall. Soil pits were hand-dug to ~100 cm, and bulk soil was sampled by horizon for physical and chemical analyses; intact cores were collected for soil water retention measurements. Pit-face photographs were used to quantify rooting distributions with depth. Each pit was instrumented with zero-tension lysimeters at two depths for bulk soil-water chemistry and with in situ sensors measuring volumetric water content, temperature, and electrical conductivity (multiple depths), soil CO2 (two depths), and soil water potential (one depth). 
    more » « less
  5. The stripping reaction of lithium will greatly impact the cyclability and safety of Li metal batteries. However, lithium pits' nucleation and growth, the origin of uneven stripping, are still poorly understood. In this study, we analyze the nucleation mechanism of Li pits and their morphology evolution with a large population and electrode area (>0.45 cm2). We elucidate the dependence of pit size and density on current density and overpotential, which is aligned with classical nucleation theory. With laser scanning confocal microscope, we reveal the preferential stripping on certain crystal grains and a new stripping mode between pure pitting and stripping without pitting. Descriptors like circularity and the aspect ratio (R) of pit radius to depth are used to quantify the evolution of lithium pits in three dimensions. As pits grow, growth predominates along the through-plane direction, surpassing the expanding rate at the in-plane direction. After analyzing more than 1000 pits at each condition, we validate that the overpotential is inversely related to the pit radius and exponentially related to the rate of nucleation. With this established nucleation-overpotential relationship, we can better understand and predict the evolution of surface area and roughness of lithium electrodes under different stripping conditions. The knowledge and methodology developed in this work will significantly benefit lithium metal batteries' charging/discharging profile design and the assessment of large-scale lithium metal foils. DOI of publication: 10.1021/acsami.4c01530 Acknowledgments: H.Z., M.U., and F.S. thank the support from the Assistant Secretary for Energy Efficiency and Renewable Energy, Office of Vehicle Technologies of the US Department of Energy through the Advanced Battery Materials Research Program. F.S. thanks the support from the National Science Foundation under Grant No. 2239690. 
    more » « less