Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


This content will become publicly available on February 27, 2027

Title: Strain mapping of three-dimensionally structured two-dimensional materials
Strain plays a crucial role in tuning materials’ properties, influencing their optical, electrical, and chemical performances. In two-dimensional (2D) materials, applied stress often induces out-of-plane deformation, resulting in a more intricate three-dimensional (3D) topography, where mapping the strain remains a challenge due to the limitations of conventional characterization techniques. In this work, we introduce BRIGHT (Bragg-Rod Informed, Gradient-based Height-mapping Technique), an integrated method for reconstructing both the topography and planar strain profile of 3D-structured 2D materials using nanobeam four-dimensional scanning transmission electron microscopy (4D-STEM). We apply BRIGHT to a MoS2-MoSe2transition metal dichalcogenide (TMD) lateral heterojunctions exhibiting built-in strain and out-of-plane ripples and show that varying heterojunction widths lead to distinct surface morphologies and corresponding changes in the planar strain distribution. These results establish a foundation for more effective strain engineering in 2D materials by accounting for out-of-plane structural features, thereby enabling more precise control of strain-dependent properties.  more » « less
Award ID(s):
2329111 2239545
PAR ID:
10675464
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ;
Publisher / Repository:
AAAS
Date Published:
Journal Name:
Science Advances
Volume:
12
Issue:
9
ISSN:
2375-2548
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; (, ACS Nano)
    null (Ed.)
    Key properties of two-dimensional (2D) layered materials are highly strain tunable, arising from bond modulation and associated reconfiguration of the energy bands around the Fermi level. Approaches to locally controlling and patterning strain have included both active and passive elastic deformation via sustained loading and templating with nanostructures. Here, by float-capturing ultrathin flakes of single-crystal 2H-MoS2 on amorphous holey silicon nitride substrates, we find that highly symmetric, high-fidelity strain patterns are formed. The hexagonally arranged holes and surface topography combine to generate highly conformal flake-substrate coverage creating patterns that match optimal centroidal Voronoi tessellation in 2D Euclidean space. Using TEM imaging and diffraction, as well as AFM topographic mapping, we determine that the substrate-driven 3D geometry of the flakes over the holes consists of symmetric, out-of-plane bowl-like deformation of up to 35 nm, with in-plane, isotropic tensile strains of up to 1.8% (measured with both selected-area diffraction and AFM). Atomistic and image simulations accurately predict spontaneous formation of the strain patterns, with van der Waals forces and substrate topography as the input parameters. These results show that predictable patterns and 3D topography can be spontaneously induced in 2D materials captured on bare, holey substrates. The method also enables electron scattering studies of precisely aligned, substrate-free strained regions in transmission mode. 
    more » « less
  2. ; ; ; ; ; (, Science Advances)
    Defects and reconstructions in two-dimensional (2D) moiré materials cause out-of-plane deformations that strongly modify their electronic properties but are difficult to experimentally access. Here, we solve the 3D atomic coordinates of twisted bilayer WSe2with picometer-scale accuracy using multislice electron ptychography (MEP) acquired from a single orientation. The resulting atomic models individually visualize each of the six atomic planes, revealing the curvature of each WSe2layer, variations in the interlayer spacing, and the 3D locations of individual vacancies, which lie exclusively in the outer Se planes. We also observe an unexpected type of structural disorder consisting of mixed bending- and breathing-type moiré-induced corrugations that should strongly affect the emergent electronic properties. Broadly, our methods generate 3D atom-by-atom models of a 2D heterointerface from data acquired in about 30 seconds, methods that should unlock routine access to 3D atomic information in 2D systems and catalyze design methods to control out-of-plane deformations. 
    more » « less
  3. ; ; ; ; ; ; ; ; ; ; et al (, Nature Communications)
    Abstract Two-dimensional (2D) semiconductors are promising candidates for optoelectronic application and quantum information processes due to their inherent out-of-plane 2D confinement. In addition, they offer the possibility of achieving low-dimensional in-plane exciton confinement, similar to zero-dimensional quantum dots, with intriguing optical and electronic properties via strain or composition engineering. However, realizing such laterally confined 2D monolayers and systematically controlling size-dependent optical properties remain significant challenges. Here, we report the observation of lateral confinement of excitons in epitaxially grown in-plane MoSe2quantum dots (~15-60 nm wide) inside a continuous matrix of WSe2monolayer film via a sequential epitaxial growth process. Various optical spectroscopy techniques reveal the size-dependent exciton confinement in the MoSe2monolayer quantum dots with exciton blue shift (12-40 meV) at a low temperature as compared to continuous monolayer MoSe2. Finally, single-photon emission (g2(0) ~ 0.4) was also observed from the smallest dots at 1.6 K. Our study opens the door to compositionally engineered, tunable, in-plane quantum light sources in 2D semiconductors. 
    more » « less
  4. ; ; ; ; (, Advanced Optical Materials)
    Abstract Two‐dimensional (2D) in‐plane heterostructures including compositionally graded alloys and lateral heterostructures with defined interfaces display rich optoelectronic properties and offer versatile platforms to explore one‐dimensional (1D) interface physics and many‐body interaction effects. Graded MoxW1 −xS2alloys show smooth spatial variations in composition and strain that continuously tune excitonic emission, while MoS2–WS2lateral heterostructures contain atomically sharp interfaces supporting 1D excitonic phenomena. These single‐layer systems combine tunable optical and electronic properties with potential for stable, high‐performance optoelectronic devices. Hyperspectral and nano‐resolved photoluminescence (PL) imaging enable spatial mapping of optical features along with local variations in composition, strain, and defects, but manual interpretation of such large datasets is slow and subjective. Here, a fast and scalable unsupervised machine‐learning (ML) framework is introduced to extract quantitative and interpretable information from hyperspectral PL datasets of graded MoxW1 −xS2alloys and MoS2–WS2heterostructures. Combining principal‐component analysis (PCA), t‐distributed stochastic neighbor embedding (t‐SNE), and density‐based spatial clustering of applications with noise (DBSCAN), spectrally distinct domains associated with composition, strain, and defect variations are uncovered. Decomposition of representative spectra reveals multiple emission species, including band‐edge excitons and defect‐related transitions, demonstrating that ML‐driven analysis provides a robust and automated route to interpret rich optical properties of 2D materials. 
    more » « less
  5. ; ; ; ; ; (, Nanotechnology)
    Abstract In-plane anisotropic two-dimensional (2D) materials exhibit in-plane orientation-dependent properties. The anisotropic unit cell causes these materials to show lower symmetry but more diverse physical properties than in-plane isotropic 2D materials. In addition, the artificial stacking of in-plane anisotropic 2D materials can generate new phenomena that cannot be achieved in in-plane isotropic 2D materials. In this perspective we provide an overview of representative in-plane anisotropic 2D materials and their properties, such as black phosphorus, group IV monochalcogenides, group VI transition metal dichalcogenides with 1T′ and Tdphases, and rhenium dichalcogenides. In addition, we discuss recent theoretical and experimental investigations of twistronics using in-plane anisotropic 2D materials. Both in-plane anisotropic 2D materials and their twistronics hold considerable potential for advancing the field of 2D materials, particularly in the context of orientation-dependent optoelectronic devices. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email