Attention:The NSF Public Access Repository (PAR) system and access will be unavailable from 11:00 PM ET on Thursday, November 12th until 12:00 AM ET on Friday, November 13th due to maintenance. We apologize for the inconvenience.


This content will become publicly available on November 21, 2026

Title: Directed self-assembly of 3D interconnected networks
Directed self-assembly (DSA) of block copolymers (BCPs) has long been included in the semiconductor roadmap as a lithographic pathway to enable continued device scaling. Tremendous progress has been made in generating two-dimensional (2D) BCP patterns with device-relevant features and low defect density and in transferring these patterns to functional materials. Extension of pattern generation into 3D could markedly enhance the utility of BCPs in nanoscale manufacturing, but methods to template and synthesize well-ordered, nontrivial 3D structures are less well developed. Here, we demonstrate a hierarchical DSA method to generate cross-point structures with connected in-plane and out-of-plane segments and controlled orientation angle between the horizontal layers. Various highly ordered, 3D interconnected networks, including ladder and cross-point structures, are produced by combinations of surface modification, BCP periodicity, and topographic templates, expanding the capabilities of BCP-derived nanofabrication.  more » « less
Award ID(s):
2411155 2118678
PAR ID:
10675628
Author(s) / Creator(s):
; ; ; ; ;
Publisher / Repository:
AAAS
Date Published:
Journal Name:
Science Advances
Volume:
11
Issue:
47
ISSN:
2375-2548
Subject(s) / Keyword(s):
Sponsoring Org:
National Science Foundation
More Like this
  1. The directed self-assembly (DSA) of block copolymers (BCPs) can be used to produce nanoscale patterns without the cost and process complexity of state-of-the-art optical lithography. Thus, DSA may be useful in a wide variety of semiconductor applications such as fin field-effect transistors and biosensors. To create technologically useful patterns with aligned BCP domains, conventional DSA mechanisms often rely on topographically complex structures or high-resolution chemical patterns to direct the self-assembly, that are difficult to fabricate. In comparison, a newly discovered mechanism for DSA, termed boundary-directed epitaxy (BDE), utilizes chemical contrast at the boundaries between a substrate and relatively wide chemical stripe. Here, we demonstrate the use of BDE to template the fabrication of sub-10 nm features for the first time. BDE is used in conjunction with selective infiltration to create ultranarrow line-space arrays of alumina. These results demonstrate a proof-of-concept for BDE as a method for ultrahigh-resolution feature formation. 
    more » « less
  2. Metal halide perovskites and their nanostructures have efficient optical absorption and emission in the visible range with high external quantum efficiency. They have been at the forefront of next-generation photovoltaics and optoelectronics applications. But several intrinsic limitations of perovskites including low stability and incompatibility with lithography-based patterning constrains their broader applications. In recent years, the integration of perovskites with polymers especially multifunctional block copolymers (BCPs) has provided a new approach to overcome those issues. The chemical composition and chain architecture of BCPs are critical for achieving synergistic effects with perovskites in their hybrid systems. In this Highlight review article, we provide an overview and critical summary of the recent progress in the creation of perovskite–BCP hybrid structures, with a focus on the different roles of BCPs. The major categories include: (i) BCPs act as the nanopattern template for the spatial control and patterning of perovskite; (ii) BCP micelles or stars act as the template for perovskite nanostructure crystallization; (iii) BCPs act as the macromolecular ligands for perovskite NCs during its solution synthesis; (iv) BCP encapsulation of perovskite NCs into hierarchical composite particles; and (v) BCP incorporation into bulk perovskite and forming bulk composite films. The applications of perovskite–BCP hybrid structures in various fields and the major current challenges are also identified and discussed. 
    more » « less
  3. Abstract Controlling the self‐assembly behaviors of block copolymers (BCPs) is a focal point of many research thrusts due to their broad use in various applications. While BCP molecular weight, volume fraction, and chemical identities are key thermodynamic parameters to determine their morphology, an emergent method in this area is through reaction‐induced changes to the characteristics of a BCPin situ, which provides access to multiple morphologies and domain sizes from a single parent polymer, as well as enabling the formation of metastable morphologies which may be difficult to attain otherwise. This work provides a focused review about the current state of reaction‐induced morphology control in BCPs in both solution and solid states. Furthermore, we provide a forward‐looking perspective on the future opportunities of understanding and employing reaction engineering to manipulate and advance BCP self‐assembly. © 2023 Society of Industrial Chemistry. 
    more » « less
  4. ABSTRACT 3D printing (3DP) is leveraged in cutting‐edge research across disparate disciplines, with block copolymers (BCPs) frequently playing key roles in state‐of‐the‐art techniques. Here we review basic block copolymer physics and properties, highlighting the applications they have enabled across many 3DP subfields. We emphasize promising areas for optical, mechanical, electronic, templating, and bioengineering advancements in applications of BCPs in 3DP. We envision these advancements will largely be enabled through using 3DP to direct self‐assembly of these nanostructured materials in 3D to enable hierarchical structural control, ultimately using BCPs either as templates for further functionalization or as inherently anisotropic materials. This review examines established and emerging applications of block copolymers in 3DP. Block copolymers are widely utilized in inks for extrusion‐based 3DP and as support matrices and sacrificial inks for embedded 3DP. New methods are being actively developed to facilitate printing of BCPs via vat photopolymerization, electric‐field‐driven deposition techniques, and other emerging techniques. We highlight the subset of BCP 3DP studies which move beyond rheological and interfacial modification to leverage the functionality of these inherently nanostructured materials. We focus on the potential to couple bottom‐up BCP self‐assembly with top‐down patterning via 3DP to achieve on‐the‐fly tunability of BCP material structure and function. 
    more » « less
  5. ABSTRACT Recent interest in manipulating the chemistry of block copolymers (BCPs) to manage the covarying properties necessary to meet manufacturing criteria in nanolithography has resulted in the development and expansion of the A‐block‐(B‐random‐C) BCP architecture, where the random block allows for the decoupling of thermodynamic and wetting properties. Previous reports of such BCPs have used click chemistry to create the desired random block, but all such instances possess additional functional groups that are susceptible to undesirable side reactions upon annealing, such as cross‐linking and surface grafting. This study reports the substitution reaction of polystyrene‐block‐poly(pentafluorophenyl methacrylate) (PS‐b‐PPFMA) with primary amines. The resulting methacrylamide structure of the functionalized random block has only an amide linkage between the attached functional group and the polymer backbone, thereby omitting any sources of side reactions within the BCP. The outcomes of this report also demonstrate the enhanced thermal stability of these materials by virtue of their stable amide bonds. A range of random copolymer compositions is assessed to develop BCPs in which the random block has approximately the same surface energy as the PS block. These BCPs can self‐assemble into perpendicular lamellae and are therefore promising candidates for directed self‐assembly. 
    more » « less