An official website of the United States government
Many complex wetting behaviors of fibrous materials are rooted in the behaviors of individual droplets attached to pairs of fibers. Here, we study the splitting of a droplet held between the tips of two cylindrical fibers. We discover a sharp transition between two post-rupture states, navigated by changing the angle between the rods, in agreement with our bifurcation analysis. Depinning of the bridge contact line can lead to a much larger asymmetry between the volume of liquid left on each rod. This second scenario enables the near-complete transfer of an aqueous glycerol droplet between two identical vinylpolysiloxane fibers. We leverage this response in a device that uses a ruck to pass a droplet along a train of fibers, a proof-of-concept for the geometric control of droplets on deformable, architected surfaces.
more »
« less
Dataset for "Controlling droplets at the tips of fibers"
Many complex wetting behaviors of fibrous materials are rooted in the behaviors of individual droplets attached to pairs of fibers. Here, we study the splitting of a droplet held between the tips of two cylindrical fibers. We discover a sharp transition between two post-rupture states, navigated by changing the angle between the rods, in agreement with our bifurcation analysis. Depinning of the bridge contact line can lead to a much larger asymmetry between the volume of liquid left on each rod. This second scenario enables the near-complete transfer of an aqueous glycerol droplet between two identical vinylpolysiloxane fibers. We leverage this response in a device that uses a ruck to pass a droplet along a train of fibers, a proof-of-concept for the geometric control of droplets on deformable, architected surfaces.
more »
« less
- PAR ID:
- 10675846
- Publisher / Repository:
- Zenodo
- Date Published:
- Edition / Version:
- 1
- ISSN:
- 2469-990X
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Wetting and spreading of liquids on fibers occurs in many natural and artificial processes. Unlike on a planar substrate, a droplet attached to one or more fibers can assume several different shapes depending on geometrical parameters such as liquid volume and fiber size and distance. This paper presents lattice Boltzmann simulations of the morphology of liquid droplets on two parallel cylindrical fibers. We investigate the final shapes resulting from spreading of an initially spherical droplet deposited on the fibers and from retraction of an initial liquid column deposited between the fibers. We observe three possible equilibrium configurations: barrel-shaped droplet, droplet bridges, and liquid columns. We determine the complete morphology diagram for varying inter-fiber spacing and liquid volume and find a region of bistability that spans both the column regime and the droplet regime. We further present a simulation protocol that allows to probe the hysteresis of transitions between different shapes. The results provide insights into energies and forces associated with shape transformations of droplets on fibers that can be used to develop fiber-based materials and microfluidic systems for manipulation of liquids at small scale.more » « less
-
With the developments in nanotechnology, nanofibrous materials attract great attention as possible platforms for fluidic engineering. This requires an understanding of droplet interactions with fibers when gravity plays no significant role. This work aims to classify all possible axisymmetric configurations of droplets on fibers. The contact angle that the drop makes with the fiber surface is allowed to change from 0° to 180°. Nodoidal apple-like droplets with inverted menisci cusped toward the droplet center and unduloidal droplets with menisci cusped away from the droplet center were introduced and fully analyzed. The existing theory describing axisymmetric droplets on fibers is significantly enriched introducing new morphological configurations of droplets. It is experimentally shown that the barreled droplets could be formed on non-wettable fibers offering contact angles greater than 90°. The theory was quantitatively confirmed with hemispherical droplets formed at the end of a capillary tube and satisfying all the boundary conditions of the model. It is expected that the developed theory could be used for the design of nanofiber-based fluidic devices and for drop-on-demand technologies.more » « less
-
Orb weavers produce webs that trap prey using a capture spiral formed of regularly spaced glue droplets supported by protein fibers. Each droplet consists of an outer aqueous layer and an adhesive, viscoelastic glycoprotein core. Organic and inorganic compounds in the aqueous layer make droplets hygroscopic and cause droplet features to change with environmental humidity. When droplets contact a surface, they adhere and extend as an insect struggles. Thus, a droplet’s extensibility is as important for prey capture as its adhesion. Cursory observations show that droplets can adhere, extend, and pull off from a surface several times, a process called cycling. Our study cycled individual droplets of four species—Argiope aurantia, Neoscona crucifera, Verrucosa arenata, and Larinioides cornutus. Droplets were subjected to 40 cycles at two humidities to determine how humidity affected droplet performance. We hypothesized that droplets would continue to perform, but that performance would decrease. Droplet performance was characterized by filament length and force on droplets at pull-off, aqueous volume, and glycoprotein volume. As hypothesized, cycling decreased performance, notably extensibility and aqueous volume. However, humidity did not impact the response to cycling. In a natural context, droplets are not subjected to extensive cycling, but reusability is advantageous for orb-weaving spiders. Moreover, the ability to cycle, combined with their environmental responsiveness, allows us to characterize orb weaver droplets as smart materials for the first time.more » « less
-
Abstract In order to improve the quality of products during additive manufacturing, we developed a novel freezing sublimation-based method for inkjet-based three-dimensional (3D) printing technology, which can significantly improve the uniformity of material distribution in printed products. In our previous studies, we used a laboratory prototype with single droplets of inkjet solution containing colloidal particles to prove the concept of this study. However, understanding the interaction between droplets on the printing substrate surface is also crucial for determining the printing resolution and accuracy of this method, which cannot be fully investigated through single droplet-based experimental studies. To fill this knowledge gap, we conducted a series of experiments on colloidal droplet impingement, freezing, and sublimation on substrates using dual droplets. The experimental setup allowed the release of two droplets in quick succession from a modified nozzle with two needles. These droplets coalesced on the substrate surface due to spreading during their impingement processes. Observations revealed that the coalescence pattern of these two droplets varied depending on the time interval between their release. When the second droplet was released immediately after the first, their coalescence was governed by fluid dynamics. However, when the second droplet was released after the first droplet had frozen on the substrate, it spread above the ice surface of the first droplet in a relatively slower process. This observation provides new insights for the continued study and optimization of the proposed novel freezing sublimation-based 3D printing method.more » « less
