Title: Bifunctional Ruthenium Alkylidene Initiator for Outward Growth of Block Copolymers via Ring‐Opening Metathesis Polymerization
ABSTRACT Ring‐opening metathesis polymerization (ROMP) offers a rapid, mild, and controlled route to prepare block copolymers via sequential monomer addition, where the number of blocks equates to the number of additions. However, block extension is hampered once control is lost, which can occur from cross‐metathesis and polymer precipitation during growth, precluding the ability to make certain functional triblock copolymers via unidirectional chain‐growth. Middle‐out growth from a bifunctional initiator cuts the number of additions in ~half, which has been extensively leveraged for controlled radical polymerizations but remains scarce for ROMP. Herein, a novel bifunctional Hoveyda‐Grubbs type ruthenium‐alkylidene initiator is presented and systematically examined for its use in ROMP of cyclic olefin monomers. The initiator is air‐stable, provides polymers with narrow molecular weight distributions (Đ < 1.20) and enables the preparation of functional ABA triblock and ABABA pentablock copolymers. Exemplars include norbornene‐based thermoplastic elastomers that are soft yet strong, and those that contain outer blocks from low ring strain cyclic olefins, namelycis‐cyclooctene to form poly(cyclooctene) that readily undergoes cross‐metathesis and cyclooctatetraene to form (semi)conductive yet poorly soluble poly(acetylene). This platform represents a valuable synthetic tool for the rapid generation of functional block copolymers with potential applications in soft robotics and electronics.  more » « less
Award ID(s):
2045336
PAR ID:
10676845
Author(s) / Creator(s):
 ;  ;  ;  ;  
Publisher / Repository:
Wiley
Date Published:
Journal Name:
Journal of Polymer Science
Volume:
63
Issue:
16
ISSN:
2642-4150
Page Range / eLocation ID:
3379 to 3385
Subject(s) / Keyword(s):
Sponsoring Org:
National Science Foundation
More Like this
  1. Degradable polymers made via ring-opening metathesis polymerization (ROMP) hold tremendous promise as eco-friendly materials. However, most of the ROMP monomers are derived from petroleum resources, which are typically considered less sustainable compared to biomass. Herein, we present a synthetic strategy to degradable polymers by harnessing alternating ROMP of biomass-based cyclic olefin monomers including exo-oxanorbornenes and cyclic enol ethers. A library of well-defined poly(enol ether)s with modular structures, tunable glass transition temperatures, and controlled molecular weights was achieved, demonstrating the versatility of this approach. Most importantly, the resulting copolymers exhibit high degrees of alternation, rendering their backbones fully degradable under acidic conditions. 
    more » « less
  2. Vinyl ethers are commonly used to deactivate Grubbs catalysts and terminate ring opening metathesis polymerization (ROMP) by forming Fischer carbene species with attenuated metathesis reactivity. However, we recently demonstrated that a cyclic enol ether, 2,3-dihydrofuran (DHF), can in fact be homopolymerized or copolymerized with norbornene derivatives. 1,5-Cyclooctadiene (COD) and cyclooctene (COE) consist of an important class of ROMP monomers, and we describe here a study of their copolymerization with DHF. Addition of DHF greatly suppressed the ROMP activity of COD and COE and resulted in significant alkene isomerization of COD. Chloranil was found to be an effective additive to prevent undesired isomerization and promote copolymerization. As a result, high molecular weight COD/COE and DHF copolymers were synthesized. Hydrolysis of the enol ether main chain linkages yields polyalkenamers with alcohol and aldehyde end groups. This study encourages further exploration of the in situ formed Ru Fischer carbene species in ROMP to access degradable polymers. 
    more » « less
  3. Abstract In an effort to synthesize chemically recyclable thermoplastic elastomers, a redox‐switchable catalytic system was developed to synthesize triblock copolymers containing stiff poly(lactic acid) (PLA) end blocks and a flexible poly(tetrahydrofuran‐co‐cyclohexene oxide) (poly(THF‐co‐CHO) copolymer as the mid‐block. The orthogonal reactivity induced by changing the oxidation state of the iron‐based catalyst enabled the synthesis of the triblock copolymers in a single reaction flask from a mixture of monomers. The triblock copolymers demonstrated improved flexibility compared to poly(l‐lactic acid) (PLLA) and thermomechanical properties that resemble thermoplastic elastomers, including a rubbery plateau in the range of −60 to 40 °C. The triblock copolymers containing a higher percentage of THF versus CHO were more flexible, and a blend of triblock copolymers containing PLLA and poly(d‐lactic acid) (PDLA) end‐blocks resulted in a stereocomplex that further increased polymer flexibility. Besides the low cost of lactide and THF, the sustainability of this new class of triblock copolymers was also supported by their depolymerization, which was achieved by exposing the copolymers sequentially to FeCl3and ZnCl2/PEG under reactive distillation conditions. 
    more » « less
  4. Copolymerization of cyclopentene (CP) and 4-phenylcyclopentene (4PCP) at a full range of comonomer feed ratios are reported using Ru-based ring-opening metathesis polymerization (ROMP) yielding homogenous copolymers analogous to poly(styrene-ran-1,4-butadiene), and poly(ethylene-ran-styrene) copolymers following hydrogenation under mild conditions. In all cases, total monomer conversions of 86–92% yielded copolymers with compositions within 4% of monomer feeds. Analysis of equilibrium copolymerization thermodynamics, rarely performed on two cycloolefin monomers with low ring strain energies, provides rational design strategies for negotiating two monomers with different equilibrium monomer concentrations. Inverse-gated decoupled 13C NMR analysis of dyad sequences on the resulting copolymer microstructures concludes a near-random distribution of comonomer units. The copolymers produced from ROMP have number average molar masses up to 60 kg mol-1, moderate dispersities (1.5 ± 0.1), and high trans olefin content (86 ± 2%) while glass transitions temperatures follow the Fox equation and span the full range between homopolymer extremities of PCP (–96 °C) and P4PCP (17 °C). Unlike most pre-vulcanized elastomers, these materials undergo facile chemical recycling to monomer, producing complete ring closing metathesis depolymerization (RCMD) of the polymer back to the CP comonomers. Quantitative olefin hydrogenation produced perfectly linear polyethylene with 4–16% of the backbone carbons containing a phenyl pendant, analogous to ES copolymers with up to 71.5% w/w styrene units but with random distribution of the aromatic pendants. Thermal properties of these materials are discussed, which span from semi-crystalline to amorphous, and with Tg values notably less than the reported ES copolymer analogs at similar composition. 
    more » « less
  5. null (Ed.)
    Plastic production continually increases its share of global oil consumption. Thermoplastic elastomers (TPEs) are a necessary component of many industries, from automotive and construction to healthcare and medical devices. To reduce the environmental burden of TPE production on the world, we developed two new ABA triblock copolymers synthesized through cationic reversable addition–fragmentation chain transfer (RAFT) polymerization from renewable monomers. Using poly(isobutyl vinyl ether) (PIBVE) as the soft block and either poly( p -methoxystyrene) (PMOS) or poly(2,3-dihydrofuran) (PDHF) as the hard blocks, we produced triblock copolymers with varying volume fractions and characterized their material properties. PDHF-PIBVE-PDHF is sourced almost entirely from simple alcohols and exhibits mechanical properties comparable to those of commercial TPEs. This effort demonstrates the utility of cationic RAFT for the production of sustainable TPEs. 
    more » « less