More Like this

1. Comparative Study of Polymer-Grafted BaTiO3 Nanoparticles Synthesized Using Normal ATRP as Well as ATRP and ARGET-ATRP with Sacrificial Initiator with a Focus on Controlling the Polymer Graft Density and Molecular Weight

   https://doi.org/10.3390/molecules28114444  

   Apata, Ikeoluwa E.; Tawade, Bhausaheb V.; Cummings, Steven P.; Pradhan, Nihar; Karim, Alamgir; Raghavan, Dharmaraj (June 2023, Molecules)

   Structurally well-defined polymer-grafted nanoparticle hybrids are highly sought after for a variety of applications, such as antifouling, mechanical reinforcement, separations, and sensing. Herein, we report the synthesis of poly(methyl methacrylate) grafted- and poly(styrene) grafted-BaTiO3 nanoparticles using activator regeneration via electron transfer (ARGET ATRP) with a sacrificial initiator, atom transfer radical polymerization (normal ATRP), and ATRP with sacrificial initiator, to understand the role of the polymerization procedure in influencing the structure of nanoparticle hybrids. Irrespective of the polymerization procedure adopted for the synthesis of nanoparticle hybrids, we noticed PS grafted on the nanoparticles showed moderation in molecular weight and graft density (ranging from 30,400 to 83,900 g/mol and 0.122 to 0.067 chain/nm2) compared to PMMA-grafted nanoparticles (ranging from 44,620 to 230,000 g/mol and 0.071 to 0.015 chain/nm2). Reducing the polymerization time during ATRP has a significant impact on the molecular weight of polymer brushes grafted on the nanoparticles. PMMA-grafted nanoparticles synthesized using ATRP had lower graft density and considerably higher molecular weight compared to PS-grafted nanoparticles. However, the addition of a sacrificial initiator during ATRP resulted in moderation of the molecular weight and graft density of PMMA-grafted nanoparticles. The use of a sacrificial initiator along with ARGET offered the best control in achieving lower molecular weight and narrow dispersity for both PS (37,870 g/mol and PDI of 1.259) and PMMA (44,620 g/mol and PDI of 1.263) nanoparticle hybrid systems. 

   more » « less
2. Versatile synthesis of siloxane‐based graft copolymers with tunable grafting density

   https://doi.org/10.1002/pol.20230615  

   D'Ambra, Colton A; Czuczola, Michael; Getty, Patrick T; Murphy, Elizabeth A; Abdilla, Allison; Biswas, Souvagya; Mecca, Jodi M; Bekemeier, Thomas D; Swier, Steven; Hawker, Craig J; et al (January 2024, Journal of Polymer Science)

   Abstract A versatile synthetic platform is reported that affords high molecular weight graft copolymers containing polydimethylsiloxane (PDMS) backbones and vinyl‐based polymer side chains with excellent control over molecular weight and grafting density. The synthetic approach leverages thiol‐ene click chemistry to attach an atom‐transfer radical polymerization (ATRP) initiator to a variety of commercially available poly(dimethylsiloxane‐co‐methylvinylsiloxane) backbones (PDMS‐co‐PVMS), followed by controlled radical polymerization with a wide scope of vinyl monomers. Selective degradation of the siloxane backbone with tetrabutylammonium fluoride confirmed the controlled nature of side‐chain growth via ATRP, yielding targeted side‐chain lengths for copolymers containing up to 50% grafting density and overall molecular weights in excess of 1 MDa. In addition, by using a mixture of thiols, grafting density and functionality can be further controlled by tuning initiator loading along the backbone. For example, solid‐state fluorescence of the graft copolymers was achieved by incorporating a thiol‐containing fluorophore along the siloxane backbone during the thiol‐ene click reaction. This simple synthetic platform provides facile control over the properties of a wide variety of grafted copolymers containing flexible PDMS backbones and vinyl polymer side chains. 

   more » « less
3. Stochastic Bullvalene Architecture Modulates Structural Rigidity in π‐Rich Macromolecules

   https://doi.org/10.1002/anie.202301695  

   Pomfret, Meredith N.; Sun, Peiguan B.; Huang, Zheng; Freund, Anna C.; Miyoshi, Toshikazu; Golder, Matthew R. (May 2023, Angewandte Chemie International Edition)

   Abstract The synthesis and processing of π‐rich polymers found in novel electronics and textiles is difficult because chain stiffness leads to low solubility and high thermal transitions. The incorporation of “shape‐shifting” molecular cages into π‐rich backbone provides an ensemble of structural kinks to modulate chain architecture via a self‐contained library of valence isomers. In this work, we report the synthesis and characterization of (bullvalene‐ co ‐phenylene)s that feature smaller persistence lengths than a prototypical rigid rod polymer, poly( p‐ phenylene). By varying the amount of bullvalene incorporation within a poly( p‐ phenylene) chain (0–50 %), we can tune thermal properties and solution‐state conformation. These features are caused by stochastic bullvalene isomers within the polymer backbone that result in kinked architectures. Synthetically, bullvalene incorporation offers a facile method to decrease structural rigidity within π‐rich materials without concomitant crystallization. VT NMR experiments confirm that these materials remain dynamic in solution, offering the opportunity for future stimuli‐responsive applications. 

   more » « less
4. Role of Surface-Grafted Polymers on Mechanical Reinforcement of Metal–Organic Framework–Polymer Composites

   https://doi.org/10.1021/acsapm.3c01195  

   Yang, Xiaozhou; Hu, Yongtao; Bonnett, Brittany L; Blosch, Sarah E; Cornell, Hannah D; Gibbons, Bradley; Santos, Claudio Amaya; Ilic, Stefan; Morris, Amanda J (October 2023, ACS Applied Polymer Materials)

   Utilizing metal–organic frameworks (MOFs) as reinforcing fillers for polymer composites is a promising strategy because of the low density, high specific modulus, and tunable aspect ratio (AR). However, it has not been demonstrated for the MOF-reinforced polymer composite using MOFs with high AR and polymer-grafted surface, both of which are extremely important factors for efficient load transfer and favorable particle–matrix interaction. To this end, we designed an MOF–polymer composite system using high AR MOF PCN-222 as the mechanical reinforcer. Moreover, we developed a synthetic route to graft poly(methyl methacrylate) (PMMA) from the surface of PCN-222 through surface-initiated atomic transfer radical polymerization (SI-ATRP). The successful growth of PMMA on the surface of PCN-222 was confirmed via proton nuclear magnetic resonance and infrared spectroscopy. Through thermogravimetric analysis, the grafting density was found to be 0.18 chains/nm2. The grafted polymer molecular weight was controlled ranging from 50.3 to 158 kDa as suggested by size exclusion chromatography. Finally, we fabricated MOF–polymer composite films by the doctor-blading technique and measured the mechanical properties through the tension mode of dynamic mechanical analysis. We found that the mechanical properties of the composites were improved with increasing grafted PMMA molecular weight. The maximum reinforcement, a 114% increase in Young’s modulus at 0.5 wt % MOF loading in comparison to pristine PMMA films, was achieved when the grafted molecular weight was higher than the matrix molecular weight, which was in good agreement with previous literature. Moreover, our composite presents the highest reinforcement measured via Young’s modulus at low weight loading among MOF-reinforced polymer composites due to the high MOF AR and enhanced interface. Our approach offers great potential for lightweight mechanical reinforcement with high AR MOFs and a generalizable grafting-from strategy for porphyrin-based MOFs. 

   more » « less
5. Revealing Deformation Mechanisms in Polymer-Grafted Thermoplastic Elastomers via In Situ Small-Angle X-ray Scattering

   https://doi.org/10.1021/acsami.3c09445  

   Torres, Vincent M.; Furton, Erik; Sevening, Jensen N.; Lloyd, Elisabeth C.; Fukuto, Masafumi; Li, Ruipeng; Pagan, Darren C.; Beese, Allison M.; Vogt, Bryan D.; Hickey, Robert J. (December 2023, ACS Applied Materials & Interfaces)

   The tunable properties of thermoplastic elastomers (TPEs), through polymer chemistry manipulations, enable these technologically critical materials to be employed in a broad range of applications. The need to “dial-in” the mechanical properties and responses of TPEs generally requires the design and synthesis of new macromolecules. In these designs, TPEs with nonlinear macromolecular architectures outperform the mechanical properties of their linear copolymer counterparts, but the differences in deformation mechanism providing enhanced performance are unknown. Here, in situ small-angle X-ray scattering (SAXS) measurements during uniaxial extension reveal distinct deformation mechanisms between a commercially available linear poly(styrene)-poly(butadiene)-poly(styrene) (SBS) triblock copolymer and the grafted SBS version containing grafted poly(styrene) (PS) chains from the poly(butadiene) (PBD) mid-block. The neat SBS (φSBS = 100%) sample deforms congruently with the macroscopic dimensions with the domain spacing between spheres increasing and decreasing along and traverse to the stretch direction, respectively. At high extensions, end segment pullout from the PS-rich domains is detected, which is indicated by a disordering of SBS. Conversely, the PS-grafted SBS that is 30 vol% SBS and 70% styrene (φSBS = 30%) exhibits a lamellar morphology and in situ SAXS measurements reveal an unexpected deformation mechanism. During deformation there are two simultaneous processes: significant lamellar domain rearrangement to preferentially orient the lamellae planes parallel to the stretch direction and crazing. The samples whiten at high strains as expected for crazing, which corresponds with the emergence of features in the two-dimensional SAXS pattern during stretching consistent with fibril-like structures that bridge the voids in crazes. The significant domain rearrangement in the grafted copolymers is attributed to the new junctions formed across multiple PS domains by the grafts of a single chain. The in situ SAXS measurements provide insights into the enhanced mechanical properties of grafted copolymers that arise through improved physical crosslinking that leads to nanostructured domain reorientation for self-reinforcement and craze formation where fibrils help to strengthen the polymer. 

   more » « less