Explore Research Products in the PAR
It may take a few hours for recently added research products to appear in PAR search results.


This content will become publicly available on April 24, 2027

Title: A strong, reversible, and conformal adhesive gel for diverse plants
Developing plant adhesives opens opportunities for studying and optimizing plant growth through precision pesticide and nutrient delivery, plant health monitoring, and human-plant interaction. However, diverse and changing topologies and chemical compositions of plants during growth present challenges in designing effective and universal adhesives. In this study, we address this challenge by developing a gel composite consisting of a biopolymer that enables dynamic covalent bonding with plant surfaces and cross-linked polyacrylamide, which provides adaptability. This composite gel demonstrates strong yet reversible adhesion on both hairy and nonhairy plant surfaces. Its adhesion strength exceeds that of previously reported noninvasive plant adhesives by an order of magnitude. This achievement enables localized and sustained drug delivery to plant tissues and allows for stable plant actuation via electrical stimulation, opening pathways for modulating sensitive plant systems.  more » « less
Award ID(s):
2011924
PAR ID:
10682343
Author(s) / Creator(s):
; ; ; ; ; ; ; ; ; ;
Publisher / Repository:
AAAS
Date Published:
Journal Name:
Science Advances
Volume:
12
Issue:
17
ISSN:
2375-2548
Format(s):
Medium: X
Sponsoring Org:
National Science Foundation
More Like this
  1. ; ; ; ; ; (, Advanced Functional Materials)
    NA (Ed.)
    Conductive adhesives are required for the integration of dissimilar material components to create soft electronic and robotic systems. Here, a heterogeneous liquid metal‐based conductive adhesive is developed that reversibly attaches to diverse surfaces with high stretchability (>100% strain), low modulus (<100 kPa), and strain‐invariant electrical conductivity. This SofT integrated composite with tacK through liquid metal (STICK‐LM) adhesive consists of a heterogeneous graded film with a liquid metal‐rich side that is embossed at prescribed locations for electrical conductivity and an electrically insulating adhesive side for integration. Adhesion behavior is tuned for adhesion energies > 70 Jm−2(≈ 25x enhancement over unmodified composites) and described with a viscoelastic analysis, providing design guidelines for controllable yet reversible adhesion in electrically conductive systems. The architecture of STICK‐LM adhesives provides anisotropic and heterogeneous electrical conductivity and enables direct integration into soft functional systems. This is demonstrated with deformable fuses for robotic joints, repositionable electronics that rapidly attach on curvilinear surfaces, and stretchable adhesive conductors with nearly constant electrical resistance. This study provides a methodology for electrically conductive, reversible adhesives for electrical and mechanical integration of multicomponent systems in emerging technologies. 
    more » « less
  2. ; ; ; (, Frontiers in Nanotechnology)
    Living organisms have evolved, over billions of years, to develop specialized biostructures with switchable adhesion for various purposes including climbing, perching, preying, sensing, and protecting. According to adhesion mechanisms, switchable adhesives can be divided into four categories: mechanically-based adhesion, liquid-mediated adhesion, physically-actuated adhesion and chemically-enhanced adhesion. Mimicking these biostructures could create smart materials with switchable adhesion, appealing for many engineering applications in robotics, sensors, advanced drug-delivery, protein separation, etc. Progress has been made in developing bioinspired materials with switchable adhesion modulated by external stimuli such as electrical signal, magnetic field, light, temperature, pH value, etc. This review will be focused on new advance in biomimetic design and synthesis of the materials and devices with switchable adhesion. The underlying mechanisms, design principles, and future directions are discussed for the development of high-performance smart surfaces with switchable adhesion. 
    more » « less
  3. ; ; ; (, Soft Matter)
    Hydrogel adhesion is a complex process that involves chain dynamics, thermodynamics, chemistry, and topology. Using fluorescent confocal microscopy in combination with fluorescent differential dynamic microscopy (fDDM), we have determined surface deformation and dynamics of cross-linked hyaluronic acid (HA) gels, equilibrated against 1–1000 mM NaCl solutions, at positively and negatively ionized surfaces. Due to the negative ionization of HA, the gels are repelled from negatively ionized glass surfaces creating a fluid separation layer and repulsion remains unaffected by salt concentration. At these interfaces, the gel network motion is slowed, as determined with fDDM in 167 mM ionic strength. To create positively ionized surfaces, poly-L-lysine is deposited on the glass surface. At higher salt concentrations, surface ionization has little effect, while in lower salt concentrations, the softer gels are compressed 4–6 times by the surface forces. In lower salt concentrations, the surface interactions are less screened and the gels are softer, leading to greater deformation. These results reveal that gel deformation and interfacial dynamics are governed by a delicate interplay between gel modulus, surface ionization, and ionic strength, underscoring the need for new theoretical models to predict soft gel behavior at interfaces and enabling the rational design of gel-based adhesives, coatings, and biointerfaces. 
    more » « less
  4. ; ; ; ; ; (, Science Advances)
    While controlling underwater adhesion is critical for designing biological adhesives and in improving the traction of tires, haptics, or adhesives for health monitoring devices, it is hindered by a lack of fundamental understanding of how the presence of trapped water impedes interfacial bonding. Here, by using well-characterized polycrystal diamond surfaces and soft, nonhysteretic, low–surface energy elastomers, we show a reduction in adhesion during approach and four times higher adhesion during retraction as compared to the thermodynamic work of adhesion. Our findings reveal how the loading phase of contact is governed by the entrapment of water by ultrasmall (10-nanometer-scale) surface features. In contrast, the same nanofeatures that reduce adhesion during approach serve to increase adhesion during separation. The explanation for this counterintuitive result lies in the incompressibility-inextensibility of trapped water and the work needed to deform the polymer around water pockets. Unlike the well-known viscoelastic contribution to adhesion, this science unlocks strategies for tailoring surface topography to enhance underwater adhesion. 
    more » « less
  5. ; ; (, Advanced Engineering Materials)
    In response to the urgent need for low‐carbon and energy‐efficient materials in the built environment, mycelium‐bound composites (MBCs), produced through fungal mycelium growth on organic waste, have emerged in the building market as sustainable alternatives to petroleum‐derived insulation and particleboards. However, the rough, hydrophobic mycelium surfaces of MBCs may pose practical challenges for installation, such as heat loss at panel–panel interfacial joints and limited compatibility with conventional fastening and adhesives. A biocompatible adhesive is therefore needed for seamless assemblies. Fungal biowelding, the innate ability of mycelium to grow across interfaces and bond materials together, holds promise as a biological interfacial adhesive. This review elucidates the interfacial bonding mechanisms of mycelium and examines how biowelding behaviors govern the fabrication of sustainable materials and engineered living composite systems. Future strategies for optimizing mycelium‐mediated adhesion and the potential use of biowelding as a bioadhesive are further discussed in the building and wood industries. By leveraging the adaptive growth, interfacial bonding, and biodegradability of mycelium, biowelding offers a regenerative adhesive solution toward circular construction systems. 
    more » « less
  • Citation Formats
  • MLA
  • APA
  • Chicago
  • BibTeX
  • Text Encoded Conversion
  • XML
  • Save / Share this Record
  • Send to Email