More Like this

1. From the ashes of VEI: Decoding explosivity, mass eruption rate and hazards in real time

   https://doi.org/10.22541/essoar.176967627.71453176/v1  

   Sahagian, Dork (January 2026, AGU)

   Ash-producing volcanic eruptions are a major natural hazard. The explosivity of these eruptions has been described for decades by a semi-quantitative “Volcanic Explosivity Index (VEI)” based on a number of interdependent factors (eruption duration, volume of ejected material, eruptive column height, tropospheric and stratospheric injection, and many qualitative descriptors), most of which could only be assessed after eruption had ceased. The utility of this semi-quantitative index has been questioned since then, yet its common usage persists. We suggest that if VEI is to be used in the future, it may as well be an index that can be determined in real time during an eruption, and one that strictly reflects eruption intensity. We find that the same value for the “traditional” Volcanic Explosivity Index of past eruptions can be estimated in real time during an eruption, based solely on eruption column height. This approach is not intended to replace the traditional VEI scale or supplant more detailed mechanistic approaches to mass eruption rate (MER); rather it can be used to provide a more immediate way of calculating the VEI and linking to MER, in real time while an eruption is taking place. As such, if the easily observed height can be measured, both MER and VEI can be estimated. This may facilitate emergency response by aviation, hazard management, and others to mitigate societal impact of hazardous eruptions. This scheme can be inverted to use volume-based VEI of ancient eruptions to roughly retrodict unobserved column height for key historic and pre-historic eruptions. Further, ash particle morphology reflects explosivity in terms of decompression rate at the vent of unobserved eruptions. With sufficiently rapid decompression, this could result in an observable bi-modal bubble size distribution. The morphology of ash particles reveals a threshold between VEI 3 and 4, above which there is sufficiently rapid decompression to trigger a second nucleation event near the vent. 

   more » « less
2. Bacterial Community Structure Modulates Soil Phosphorus Turnover at Early Stages of Primary Succession

   https://doi.org/10.1029/2024GB008174  

   Wang, Yuhan; Bing, Haijian; Moorhead, Daryl L; Hou, Enqing; Wu, Yanhong; Wang, Jipeng; Duan, Chengjiao; Cui, Qingliang; Zhang, Zhiqin; Zhu, He; et al (October 2024, Global Biogeochemical Cycles)

   Abstract Microbes are the drivers of soil phosphorus (P) cycling in terrestrial ecosystems; however, the role of soil microbes in mediating P cycling in P‐rich soils during primary succession remains uncertain. This study examined the impacts of bacterial community structure (diversity and composition) and its functional potential (absolute abundances of P‐cycling functional genes) on soil P cycling along a 130‐year glacial chronosequence on the eastern Tibetan Plateau. Bacterial community structure was a better predictor of soil P fractions than P‐cycling genes along the chronosequence. After glacier retreat, the solubilization of inorganic P and the mineralization of organic P were significantly enhanced by increased bacterial diversity, changed interspecific interactions, and abundant species involved in soil P mineralization, thereby increasing P availability. Although 84% of P‐cycling genes were associated with organic P mineralization, these genes were more closely associated with soil organic carbon than with organic P. Bacterial carbon demand probably determined soil P turnover, indicating the dominant role of organic matter decomposition processes in P‐rich alpine soils. Moreover, the significant decrease in the complexity of the bacterial co‐occurrence network and the taxa‐gene‐P network at the later stage indicates a declining dominance of the bacterial community in driving soil P cycling with succession. Our results reveal that bacteria with a complex community structure have a prominent potential for biogeochemical P cycling in P‐rich soils during the early stages of primary succession. 

   more » « less
3. Phosphorus chemistry in plant charcoal: interplay between biomass composition and thermal condition

   https://doi.org/10.1071/WF23096  

   Wu, Yudi; Pae, Lois M; Huang, Rixiang (January 2024, International Journal of Wildland Fire)

   Background Vegetation fire may change Phosphorus (P) cycling in terrestrial ecosystems through converting biomass into fire residues. Aim The aim of this study was to understand the chemistry and mobility of P in fire residues to help reveal P thermochemistry during biomass burning and post-fire P cycling. Methods A combination of sequential extraction, liquid 31P NMR and P K-edge XANES was used to obtain quantitative P speciation and explain P solubilisation behaviours of charcoal. Key results Despite varying diverse P species existing in raw biomass, only two P structural moieties – orthophosphate and pyrophosphate – were identified in charcoal. However, relative abundance of pyrophosphate differs greatly among charcoal samples from different biomass types, ranging between 0 and 40% of total extractable P. Although P K-edge XANES data indicates abundant soluble phosphate minerals, most P (70–90%) is likely occluded physically in the charcoal. The bicarbonate-extractable P (the Olsen-P) varies significantly and cannot be explained by surface P concentration or elemental stoichiometry alone. Conclusion and implications The results suggest the importance of starting biomass P speciation (i.e. molecular structure and complexation environment) and thermal conditions in controlling P speciation and availability in charcoal. The different P chemistry between charcoal and ash suggests the importance of fire types and severity in disturbing the P cycle. 

   more » « less
4. The L _p chord Minkowski problem

   https://doi.org/10.1515/ans-2022-0041  

   Xi, Dongmeng; Yang, Deane; Zhang, Gaoyong; Zhao, Yiming (January 2023, Advanced Nonlinear Studies)

   Abstract Chord measures are newly discovered translation-invariant geometric measures of convex bodies in R n {{\mathbb{R}}}^{n} , in addition to Aleksandrov-Fenchel-Jessen’s area measures. They are constructed from chord integrals of convex bodies and random lines. Prescribing the L p {L}_{p} chord measures is called the L p {L}_{p} chord Minkowski problem in the L p {L}_{p} Brunn-Minkowski theory, which includes the L p {L}_{p} Minkowski problem as a special case. This article solves the L p {L}_{p} chord Minkowski problem when p > 1 p\gt 1 and the symmetric case of 0 < p < 1 0\lt p\lt 1 . 

   more » « less
5. High species richness in the lichen genus Peltigera (Ascomycota, Lecanoromycetes): 34 species in the dolichorhizoid and scabrosoid clades of section Polydactylon, including 24 new to science

   https://doi.org/10.3767/persoonia.2023.51.01  

   Magain, N.; Miadlikowska, J.; Goffinet, B.; Goward, T.; Pardo-De la Hoz, C.J.; Jüriado, I.; Simon, A.; Mercado-Díaz, J.A.; Barlow, T.; Moncada, B.; et al (August 2023, Persoonia - Molecular Phylogeny and Evolution of Fungi)

   Applying molecular methods to fungi establishing lichenized associations with green algae or cyanobacteria has repeatedly revealed the existence of numerous phylogenetic taxa overlooked by classical taxonomic approaches. Here, we report taxonomical conclusions based on multiple species delimitation and validation analyses performed on an eight-locus dataset that includes world-wide representatives of the dolichorhizoid and scabrosoid clades in section Polydactylon of the genus Peltigera . Following the recommendations resulting from a consensus species delimitation approach and additional species validation analysis (BPP) performed in this study, we present a total of 25 species in the dolichorhizoid clade and nine in the scabrosoid clade, including respectively 18 and six species that are new to science and formally described. Additionally, one combination and three varieties (including two new to science) are proposed in the dolichorhizoid clade. The following 24 new species are described: P. appalachiensis , P. asiatica , P. borealis , P. borinquensis , P. chabanenkoae , P. clathrata , P. elixii , P. esslingeri , P. flabellae , P. gallowayi , P. hawaiiensis , P. holtanhartwigii , P. itatiaiae , P. hokkaidoensis , P. kukwae , P. massonii , P. mikado , P. nigriventris , P. orientalis , P. rangiferina , P. sipmanii , P. stanleyensis , P. vitikainenii and P. willdenowii ; the following new varieties are introduced: P. kukwae var. phyllidiata and P. truculenta var. austroscabrosa ; and the following new combination is introduced: P. hymenina var. dissecta . Each species from the dolichorhizoid and scabrosoid clades is morphologically and chemically described, illustrated, and characterised with ITS sequences. Identification keys are provided for the main biogeographic regions where species from the two clades occur. Morphological and chemical characters that are commonly used for species identification in the genus Peltigera cannot be applied to unambiguously recognise most molecularly circumscribed species, due to high variation of thalli formed by individuals within a fungal species, including the presence of distinct morphs in some cases, or low interspecific variation in others. The four commonly recognised morphospecies: P. dolichorhiza , P. neopolydactyla , P. pulverulenta and P. scabrosa in the dolichorhizoid and scabrosoid clades represent species complexes spread across multiple and often phylogenetically distantly related lineages. Geographic origin of specimens is often helpful for species recognition; however, ITS sequences are frequently required for a reliable identification. 

   more » « less