Oxidation of isoprene, the biogenic volatile organic compound with the highest emissions globally, is a large source of secondary organic aerosol (SOA) in the atmosphere. Organosulfates, particularly methyltetrol sulfates formed from acid-driven reactions of the oxidation product isoprene epoxydiol (IEPOX) onto particulate sulfate, are important contributors to SOA mass. To date, most studies have focused on organosulfate formation on ammonium sulfate particles at low pH. However, recent work has shown that sea spray aerosol (SSA) in the accumulation mode (~100 nm) is often quite acidic (pH ~ 2). Marine biota are well-established sources of isoprene, with annual global oceanic fluxes of isoprene estimated to range from 1-12 Tg, and IEPOX-derived organosulfates have been identified in marine environments. Herein, we demonstrate that substantial SOA, including organosulfates, are formed on acidic sodium sulfate particles, representative of marine aerosol heterogeneously reacting with H2SO4 to form Na2SO4. We compare SOA formed from the reactive uptake of IEPOX onto particulate sulfate and find that the cation (sodium vs. ammonium) impacts the physical properties and chemical composition of the SOA formed. Additionally, we investigate the formation of SOA derived from sodium sulfate based on key properties including particle acidity and the extent of exposure to oxidation via OH radicals. Our results suggest that isoprene-derived SOA formed on aged SSA is potentially an important, but underappreciated, source of SOA and organosulfates in marine and coastal regions and could modify SOA budgets and composition in these environments.
more »
« less
Unexpected Stereochemical Specificity for Organosulfates Formed from Isoprene-Epoxide Ring Opening Reactions as a Function of Aerosol Acidity.
10AC.5 Unexpected Stereochemical Specificity for Organosulfates Formed from Isoprene-Epoxide Ring Opening Reactions as a Function of Aerosol Acidity. ANDREW P. AULT, Madeline Cooke, N. Cazimir Armstrong, Cara Waters, Qiyuan Zhao, Scarlet Aguilar-Martinez, Yuzhi Chen, Ziying Lei, Zhenfa Zhang, Avram Gold, Paul Zimmerman, Jason Surratt, University of Michigan Chirality is a central property of organic molecules that plays a key role in chemical properties and biological impacts of molecules with only a slight difference at a single stereocenter within a molecule. In secondary organic aerosol (SOA) species with different stereoisomers are assumed to be present equally within racemic mixtures, unless there is an initial stereospecificity of the condensing or reacting oxidized VOCs. Unexpectedly, we found that certain stereoisomers of organosulfates are formed preferentially from isoprene epoxydiols without initial stereospecificity. This surprising result is confirmed with computational chemistry showing a significant energy difference in the formation of certain stereoisomers. In addition, we see a pH-dependent shift in the mechanism of reaction from an SN1 dominating the lowest acidities studied to an increase in the concerted SN2 mechanism at higher pH values. These results were enabled through a combination of advanced analytical methodologies, specifically hydrophilic interaction liquid chromatography coupled with mass spectrometry (HILIC/ESI-HR-QTOFMS) that can separate the MTS diastereomers and computational chemistry studies using advanced sampling methods to explore the reaction mechanisms. Identifying this unexpected chirality from racemic precursors and connecting it to mechanisms occurring within atmospheric aerosols has broad importance for SOA chemical composition, physicochemical properties, and potentially human health after inhalation. Further studies are needed to determine the breadth of this chirality within aerosols and its potential implications.
more »
« less
- Award ID(s):
- 2304669
- PAR ID:
- 10689838
- Publisher / Repository:
- American Association for Aerosol Research
- Date Published:
- Subject(s) / Keyword(s):
- Location:
- Buffalo, NY
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Secondary organic aerosol (SOA) is a significant component of atmospheric fine particulate matter (PM2.5) globally that can form through multiphase chemistry of oxidized volatile organic compounds (VOC) leading to lower‐volatility particulate species. Condensed phase reactions of certain SOA constituents with inorganic sulfate derived from SO2 oxidation will lead to the formation of organosulfates, which can account for up to 10 – 15% of the organic mass within PM2.5. Despite the ubiquitous presence of atmospheric fine particulate organosulfates, our fundamental understanding of the molecular structure of organosulfates is limited, including for 2‐methyltetrol organosulfates (2‐MTSs), which are typically the single most abundant organosulfates measured in PM2.5, formed from isoprene oxidation products. As atmospheric aerosol pH varies widely (0 – 6), it is important to know whether organosulfates exist primarily in their protonated (ROSO3H) or deprotonated (ROSO3 ‐) forms. In this study, vibrational modes of synthetically‐pure 2‐MTSs were spectroscopically probed using Raman and infrared (IR) spectroscopies, supported by density functional theory (DFT) of the protonated and deprotonated structures. Vibrational bands at 1035 and 1059 cm‐1 were seen in both the IR and Raman spectra, and were associated with the ROSO3 ‐ anion by comparison to DFT calculations. Analysis of Raman spectra across a range of acidities (pH = 0 – 10) shows that 2‐MTSs are deprotonated (ROSO3 ‐) at those pH values. Additional DFT calculations for organosulfates derived from isoprene, α‐pinene, β‐caryophyllene, and toluene suggest that most organosulfates exist in their deprotonated form (ROSO3 ‐) in atmospheric particles. These charged species may have significant implications for our understanding of aerosol acidity and should be considered in thermodynamic model calculations.more » « less
-
Oxidation of isoprene, the biogenic volatile organic compound with the highest emissions globally, is a large source of secondary organic aerosol (SOA) in the atmosphere. Organosulfates, particularly methyltetrol sulfates, formed from acid-driven reactions of isoprene epoxydiols (IEPOX), a key oxidation product, are important contributors to SOA mass. To date, most studies have focused on organosulfate formation on ammonium sulfate particles at low pH. However, recent work has shown sea spray aerosol (SSA) in the accumulation mode (~100 nm) is often quite acidic (pH ~ 2) and IEPOX-derived organosulfates have been identified in marine environments. Herein, we demonstrate that substantial SOA, including organosulfates, are formed on acidic sodium sulfate particles (pH = 1.3), representative of marine aerosol heterogeneously reacting with H2SO4 to form Na2SO4. For acidic sodium and ammonium sulfate particles, 31 and 28% (±1%), respectively, of inorganic sulfate is incorporated into organosulfate species, even though acidic particles with sodium versus ammonium as the primary cation formed 5% (±0.2) less SOA volume and 45% (±6%) less methyltetrol sulfates, suggesting other organosulfates may form. Even though both exhibited core-shell morphology after IEPOX uptake, physicochemical differences were observed via Raman microspectroscopy, with organosulfates identified in both the core and shell of acidic ammonium sulfate SOA particles, but only in the core for acidic sodium sulfate SOA via Raman microspectroscopy. Our results suggest that isoprene-derived SOA formed on aged SSA is potentially an important, but underappreciated, source of SOA and organosulfates in marine and coastal regions and could modify SOA budgets in these environments.more » « less
-
Isoprene epoxydiols (IEPOX), major atmospheric oxidation products of the abundant biogenic VOC isoprene, contribute extensively to secondary organic aerosol (SOA) formation in Earth’s troposphere in low-NOx regions. IEPOX undergoes acid-catalyzed multiphase chemical reactions with anthropogenically derived acidic sulfate aerosol particles, forming a variety of low-volatility and semivolatile SOA products. One class of low-volatility SOA products is organosulfates (OS), which result from inorganic sulfate covalently bonded with IEPOX upon its epoxide-ring opening reactions. However, the mass balance between inorganic sulfate OS has yet to be constrained by laboratory studies under varying aerosol acidity conditions representative of atmospheric aerosols. In this study, smog chamber experiments were conducted to constrain the mass balance between organic and inorganic sulfur. The SOA formed during these experiments were collected onto filters and subsequently chemically analyzed with ion chromatography (IC) and inductively coupled plasma interfaced to optical emission spectroscopy (ICP-OES) to determine the change in sulfur form before and after reaction with IEPOX. From our initial results, the percentage of inorganic sulfate converted to OS in IEPOX-derived SOA is approximately 47.1 to 50.2%. Methyltetrol sulfates, the most abundant form of OS found in atmospheric aerosols, will be quantified by HILIC/ESI-HR-QTOFMS, allowing for the first determination of the total mass fractions of oligomeric OS. This work will help atmospheric modelers in their predictions of SOA formation and sulfur mass balance in atmospheric aerosols, which has not been well constrained by models thus far. Ongoing work will include further constraining the effect of initial IEPOX: inorganic sulfate mass ratio at a fixed aerosol acidity on the particulate sulfur mass balance in chamber experiments.more » « less
-
ABSTRACT: Isoprene has the highest atmospheric emissions of any nonmethane hydrocarbon, and isoprene epoxydiols (IEPOX) are well-established oxidation products and the primary contributors forming isoprene-derived secondary organic aerosol (SOA). Highly acidic particles (pH 0−3) widespread across the lower troposphere enable acid-driven multiphase chemistry of IEPOX, such as epoxide ring-opening reactions forming methyltetrol sulfates through nucleophilic attack of sulfate (SO4 2−). Herein, we systematically demonstrate an unexpected decrease in SOA formation from IEPOX on highly acidic particles (pH < 1). While IEPOX-SOA formation is commonly assumed to increase at low pH when more [H+] is available to protonate epoxides, we observe maximum SOA formation at pH 1 and less SOA formation at pH 0.0 and 0.4. This is attributed to limited availability of SO4 2− at pH values below the acid dissociation constant (pKa) of SO42− and bisulfate (HSO4−). The nucleophilicity of HSO4− is 100× lower than SO42−, decreasing SOA formation and shifting particulate products from low-volatility organosulfates to higher-volatility polyols. Current model parameterizations predicting SOA yields for IEPOX-SOA do not properly account for the SO42−/HSO4 − equilibrium, leading to overpredictions of SOA formation at low pH. Accounting for this underexplored acidity-dependent behavior is critical for accurately predicting SOA concentrations and resolving SOA impacts on air quality.more » « less
An official website of the United States government

