This content will become publicly available on March 1, 2027

Title: Hole-doping reduces the coercive field in ferroelectric hafnia
Ferroelectric hafnia (Hf⁢O2) holds promise for next-generation memory and logic applications because of its CMOS compatibility. However, the high coercive field required for polarization switching in Hf⁢O2 remains a critical challenge for efficient device operations. Using first-principles calculations and phenomenological modeling, we predict that hole-doping can reduce the coercive field from 8 MV/cm in undoped hafnia to 6 MV/cm in hafnia doped with 0.2 holes per formula unit (f.u.). In the absence of doping, the reversal of polarization of the 𝑃⁢𝑐⁢𝑎⁢21 phase is preferred through the nonpolar, tetragonal 𝑃⁢42/𝑛⁢𝑚⁢𝑐 phase. This switching pathway involves the coupling of three hard distortion modes that render undoped hafnia as an improper ferroelectric. The overall energy barrier through this pathway remains unchanged (∼80 meV/f.u.) upon hole-doping. However, the introduction of holes hardens the polar Γ−2 distortion mode that connects the polar 𝑃⁢𝑐⁢𝑎⁢21 phase to the nonpolar, orthorhombic Pbcm phase, and reduces the energy barrier from 180 meV/f.u. in undoped hafnia to 80 meV/f.u. at 0.2 holes/f.u. The activation of the latter switching pathway through the Pbcm phase can lead to a reversal in the polarization direction. Overall, hole-doping makes the switching pathway through the Pbcm phase competitive, and renders hafnia as a proper ferroelectric with a lower coercive field.  more » « less
Award ID(s):
2145797 2122070
PAR ID:
10693122
Author(s) / Creator(s):
; ; ;
Publisher / Repository:
APS
Date Published:
Journal Name:
Physical Review Materials
Volume:
10
Issue:
3
ISSN:
2475-9953
Subject(s) / Keyword(s):
Sponsoring Org:
National Science Foundation
More Like this
  1. The recent observation of ferroelectricity in the metastable phases of binary metal oxides, such as HfO2, ZrO2, Hf0.5Zr0.5O2, and Ga2O3, has garnered a lot of attention. These metastable ferroelectric phases are typically stabilized using epitaxial strain, alloying, or defect engineering. Here, we propose that hole doping plays a key role in the stabilization of polar phases in binary metal oxides. Using first-principles density-functional-theory calculations, we show that holes in these oxides mainly occupy one of the two oxygen sublattices. This hole localization, which is more pronounced in the polar phase than in the nonpolar phase, lowers the electrostatic energy of the system, and makes the polar phase more stable at sufficiently large concentrations. We demonstrate that this electrostatic mechanism is responsible for stabilization of the ferroelectric phase of HfO2 aliovalently doped with elements that introduce holes to the system, such as La and N. Finally, we show that spontaneous polarization in HfO2 is robust to hole doping, and a large polarization persists even under a high concentration of holes. 
    more » « less
  2. null (Ed.)
    Abstract Integration of ferroelectric materials into novel technological applications requires low coercive field materials, and consequently, design strategies to reduce the ferroelectric switching barriers. In this first principles study, we show that biaxial strain, which has a strong effect on the ferroelectric ground states, can also be used to tune the switching barrier of hybrid improper ferroelectric Ruddlesden–Popper oxides. We identify the region of the strain-tolerance factor phase diagram where this intrinsic barrier is suppressed, and show that it can be explained in relation to strain-induced phase transitions to nonpolar phases. 
    more » « less
  3. BiFeO3is a model multiferroic in which the ferroelectric polarization is coupled to ferroelastic lattice distortions, yet deterministic control of its domain structure remains limited by high switching fields and competing polarization variants. Here, we identify a mechanically assisted polarization switching pathway in epitaxial BiFeO3thin films that fundamentally alters the switching energetics. Using just out-of-plane electric fields, polarization reversal requires voltages of approximately 4 volts and stabilizes coexisting polarization states. In contrast, when mechanical pressure is applied concurrently, the positive coercive voltage can be substantially reduced, even to 0 volts, resulting in spontaneous switching. Piezoresponse force microscopy measurements reveal that applied mechanical pressure suppresses ferroelastic domain competition, indicating a decrease in the required electrical energy barrier associated with polarization rotation and domain wall motion. This frames the strain field from the AFM tip directly as an effective voltage that assists in ferroelectric switching. By directly coupling lattice distortions to polarization reversal, mechanically assisted switching provides a general framework for controlling coupled order parameters in multiferroic oxides, which can be directly applied in the device-level architecture, where a small mechanical pressure can help in achieving a lower switching energy of ferroelectric polarization. This work advances the fundamental understanding of electromechanical coupling in complex ferroics and establishes mechanical energy as a powerful tool for probing and manipulating ferroelastic-ferroelectric interactions. 
    more » « less
  4. Single crystals of BaTiO3 exhibit small switching fields and energies, but thin-film performance is considerably worse, thus precluding their use in next-generation devices. Here, we demonstrate high-quality BaTiO3 thin films with nearly bulk-like properties. Thickness scaling provides access to the coercive voltages (<100 mV) and fields (<10 kV cm−1) required for future applications and results in a switching energy of <2 J cm−3 (corresponding to <2 aJ per bit in a 10 × 10 × 10 nm3 device). While reduction in film thickness reduces coercive voltage, it does so at the expense of remanent polarization. Depolarization fields impact polar state stability in thicker films but fortunately suppress the coercive field, thus driving a deviation from Janovec–Kay–Dunn scaling and enabling a constant coercive field for films <150 nm in thickness. Switching studies reveal fast speeds (switching times of ~2 ns for 25-nm-thick films with 5-µm-diameter capacitors) and a pathway to subnanosecond switching. Finally, integration of BaTiO3 thin films onto silicon substrates is shown. We also discuss what remains to be demonstrated to enable the use of these materials for next-generation devices. 
    more » « less
  5. We report the observation of the smectic A F , a liquid crystal phase of the ferroelectric nematic realm. The smectic A F is a phase of small polar, rod-shaped molecules that form two-dimensional fluid layers spaced by approximately the mean molecular length. The phase is uniaxial, with the molecular director, the local average long-axis orientation, normal to the layer planes, and ferroelectric, with a spontaneous electric polarization parallel to the director. Polarization measurements indicate almost complete polar ordering of the ∼10 Debye longitudinal molecular dipoles, and hysteretic polarization reversal with a coercive field ∼2 × 10 5 V / m is observed. The SmA F phase appears upon cooling in two binary mixtures of partially fluorinated mesogens: 2N/DIO, exhibiting a nematic (N)–smectic Z A (SmZ A )–ferroelectric nematic (N F )–SmA F phase sequence, and 7N/DIO, exhibiting an N–SmZ A –SmA F phase sequence. The latter presents an opportunity to study a transition between two smectic phases having orthogonal systems of layers. 
    more » « less