An official website of the United States government
Abstract Metal‐coordinated hydrogels can form a percolated network with transient bonds due to metal ions‐functional group coordination. Each metal ion can link with more than one ligand, leading to intricate speciation of bonding modes. While the mechanics of transient gels made with four‐arm polymers are often studied, less is known about how increasing the number of arms affects the modulus. Using shear rheology, the modulus of hydrogels prepared from four‐, six‐, and eight‐armed poly(ethylene glycols), functionalized with histidine ligands that complex with nickel (II) ions is measured. These gels have matched polymer wt.% and varied pH to compare their moduli. It is considered whether the modulus can be described by established polymer network models by calculating the speciation of metal‐coordinated cross‐links and then incorporating it into a phantom network prediction. This study finds that 1) increasing the number of polymer arms increases the modulus, 2) the phantom network allows reasonable modulus approximation for four‐arm and six‐arm gels, and 3) the modulus of eight‐arm gels exceeds the phantom network prediction. Since polymer cores act as chemical cross‐links and metal‐coordinated cross‐links form network strands, it is possible that increasing the number of metal‐coordinated linkages per molecule reinforces the chemical cross‐link at the polymer core.
more »
« less
This content will become publicly available on April 14, 2027
Photoswitchable Cross-Linking in Polymer Gels: Effects on Surface Creasing and Network Relaxation during Swelling
Polymer gels with photoresponsive cross-links enable tunable mechanics and surface morphologies, making them promising for adaptive materials. While prior work on coumarin cross-linked gels has focused on photomediated events in dilute solution, their network-level mechanical responses remain unclear. Herein, we design PEG hydrogels with both permanent covalent and dynamic coumarin cross-links, allowing in situ modulation of cross-linking under wavelength-specific UV light. Real-time FTIR and dynamic mechanical analysis (DMA) show that postcure 365 nm irradiation drives rapid dimerization, increasing storage modulus by up to 69%, whereas cleavage of coumarin cross-links via 254 nm postcure irradiation has a more limited effect due to attenuation in bulk samples. Surface imaging reveals that dynamic cross-linking governs swelling-induced crease formation and evolution. Together, these results establish design principles for hydrogels with programmable mechanics and adaptive surface topographies, enabling light-addressable coatings, mechanically lockable soft actuators, and dynamic biomaterial interfaces.
more »
« less
- PAR ID:
- 10696425
- Publisher / Repository:
- American Chemical Society
- Date Published:
- Journal Name:
- Macromolecules
- Volume:
- 59
- Issue:
- 7
- ISSN:
- 0024-9297
- Page Range / eLocation ID:
- 4622 to 4635
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Recently, it has been recognized that natural extracellular matrix (ECM) and tissues are viscoelastic, while only elastic properties have been investigated in the past. How the viscoelastic matrix regulates stem cell patterning is critical for cell‐ECM mechano‐transduction. Here, this study fabricated different methacrylated hyaluronic acid (HA) hydrogels using covalent cross–linking, consisting of two gels with similar elasticity (stiffness) but different viscoelasticity, and two gels with similar viscoelasticity but different elasticity (stiffness). Meanwhile, a second set of dual network hydrogels are fabricated containing both covalent and coordinated cross–links. Human spinal cord organoid (hSCO) patterning in HA hydrogels and co‐culture with isogenic human blood vessel organoids (hBVOs) are investigated. The viscoelastic hydrogels promote regional hSCO patterning compared to the elastic hydrogels. More viscoelastic hydrogels can promote dorsal marker expression, while softer hydrogels result in higher interneuron marker expression. The effects of viscoelastic properties of the hydrogels become more dominant than the stiffness effects in the co‐culture of hSCOs and hBVOs. In addition, more viscoelastic hydrogels can lead to more Yes‐associated protein nuclear translocation, revealing the mechanism of cell‐ECM mechano‐transduction. This research provides insights into viscoelastic behaviors of the hydrogels during human organoid patterning with ECM‐mimicking in vitro microenvironments for applications in regenerative medicine.more » « less
-
Dynamic covalent cross-links impart hydrogels with viscoelastic and self-healing properties, motivating applications as biomimetic cell scaffolds and injectable materials. The long bond lifetime results in complex rheological behavior including shear thickening. We hypothesized that this behavior applies broadly across dynamic covalent hydrogels and can be engineered through reaction rate constants. Thus, we synthesized multiarm poly(ethylene glycol) (PEG) hydrogels with conjugate addition, boronate ester, or terpyridine-zinc cross-links, which tune bond dissociation kinetics and hydrogel relaxation times over four orders of magnitude. All formulations exhibited shear thickening, with the onset dictated by the relaxation time. Although multiple mechanisms may underlie this behavior, chain stretching is hypothesized to contribute to shear thickening, as the cross-linking concentration remained constant under shear and networks with more defects correlated with increased shear thickening. These molecular and structural drivers of shear thickening apply across dilute dynamic covalent tetra-PEG hydrogels, clarifying their suitability for applications under shear.more » « less
-
Hydrogels are soft water-rich materials with physical properties that can be easily tuned by modifying their network structure. For instance, increasing or decreasing the cross-linking density has a profound effect on their water absorption capabilities and mechanical strength. These physical changes are showcased in a new experiment for organic chemistry and polymer science teaching laboratories based on the practical green synthesis and characterization of lactose methacrylate derived hydrogels. Lactose, a disaccharide derived from dairy waste byproducts, is functionalized with photoreactive methacrylate groups using methacrylic anhydride. The resulting mixture is subsequently photoirradiated to generate a cross-linked hydrogel. Structure–property relationships are assessed through comparative studies of three hydrogels of varying compositions. Compression tests and swelling studies in different aqueous environments offer a guided-inquiry experience. Students determine a relationship between cross-linking density and the physical properties of the hydrogels. This experiment highlights the valorization of biomass and multiple green chemistry principles including use of renewable feedstocks, atom economy, energy efficiency, waste prevention, and water as a benign solvent. Learning outcomes for an organic chemistry laboratory course include introduction to disaccharide and cross-linked polymer structures, observable physical change dependency with cross-linking density, and laboratory methods for evaluating water absorption capacities. Objectives aligned with a polymer course are incorporating mechanical compression instrumentation, mechanistic understanding of light-induced free radical polymerizations, and an appreciation for the application of hydrogels to commercial products. Overall, the translation of a current literature publication to an inexpensive and versatile experiment engages students in a modern example of sustainable polymer chemistry.more » « less
-
We present a versatile one-pot synthesis method for creating surface-anchored orthogonal gradient networks using a small bi-functional gelator, 4-azidosulfonylphenethyltrimethoxysilane (4-ASPTMS). The sulfonyl azide (SAz) group of 4-ASPTMS is UV (≤254 nm) and thermally active (≥100 °C) and, thus, enables us to vary the cross-link density in orthogonal directions by controlling the activation of SAz groups via UV and temperature means. We deposit a thin layer (∼200 nm) of a mixture comprising ∼90% precursor polymer and ∼10% 4-ASPTMS in a silicon wafer. Upon UV irradiation or annealing the layers, SAz releases nitrogen by forming singlet and triplet nitrenes that concurrently react with any C–H bond in the vicinity leading to sulfonamide cross-links. Condensation among trimethoxy groups in the bulk connects 4-ASPTMS units and completes the cross-linking. Simultaneously, 4-ASPTMS near the substrate reacts with surface-bound –OH motifs that anchor the cross-linked polymer chains to the substrate. We demonstrate the generation of orthogonal gradient network coatings exhibiting cross-link density (or stiffness) gradients in orthogonal directions using such a simple process.more » « less
