This paper presents a comprehensive analysis of the impact of intra-pair PN skew compensation in printed circuit board (PCB) strip line (SL) traces, for a high-speed 224 Gbps lane for the first time. The study investigates the effects of skew compensation placement both with and without via discontinuities. Detailed evaluations are performed in both time and frequency domains, examining critical parameters such as time-domain reflectometry (TDR), input impedance, return loss, insertion loss, and common-mode S -parameters. The findings reveal that, in a simple strip line trace without via discontinuities, the location of skew compensation has negligible influence on signal margins. However, when via discontinuities are introduced, the impact becomes significant on signal margins and common-mode conversion. This highlights the crucial role of skew compensation placement in high-speed designs, where increasingly tight performance margins and reduced PCB dimensions exacerbate signal integrity challenges. The results underscore the importance of careful design considerations to optimize performance in modern high-speed interconnects.
more »
« less
Method of Termination with Absorbers for Far-End Crosstalk Measurements
The increasing demand for higher data rates in modern electronic systems has heightened the challenges of maintaining signal integrity, particularly in addressing farend crosstalk (FEXT). This paper presents a novel approach using absorber-based terminations to perform signal integrity measurements in high-speed PCB designs. The performance of magnetically and electrically loaded absorber materials is evaluated against traditional 50Ω terminations with performance parameters such as S-parameters, Time-Domain reflectometry (TDR), and induced far-end crosstalk voltage. Simulations and experimental measurements demonstrate that electrically loaded absorbers can achieve performance characteristics comparable to high-quality terminations, particularly for reflections and impedance matching. The results indicate that absorbers offer a cost-effective and adaptable solution for termination applications, with the potential for fast application on existing PCB layouts. However, challenges remain in ensuring consistent pressure for optimal performance. The findings in this paper underlines the feasibility of absorbers for terminations.
more »
« less
- Award ID(s):
- 1916535
- PAR ID:
- 10696601
- Publisher / Repository:
- IEEE
- Date Published:
- ISBN:
- 979-8-3315-0874-6
- Page Range / eLocation ID:
- 561 to 566
- Subject(s) / Keyword(s):
- Voltage measurement Impedance measurement Layout Crosstalk Reflectometry Reflection Scattering parameters Time-domain analysis Signal integrity Load modeling Termination Method Far-end Crosstalk Performance Parameters Printed Circuit Board Time Domain Reflectometry Parasite Rise Time Picosecond Peak Voltage SMA Connector Active Impedance Crosstalk Far-end crosstalk FEXT Absorber Termination
- Location:
- Raleigh, NC, USA
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
This paper proposes a novel multi-objective inverse optimization method for high-speed interconnects based on a cascaded deep neural network (DNN) structure, which can efficiently optimize characteristic impedance, insertion loss, and far-end crosstalk (FEXT) simultaneously. Parameter optimization for high-speed interconnects is essential to the signal integrity and electrical performance of complex designs such as multilayer printed circuit boards (PCBs) and chiplets. Conventional optimization approaches often rely on numerous optimization iterations, which is highly time-consuming, especially in highdimensional parameter spaces. This paper proposes a novel DNNbased method by cascading an inverse-prediction network and a forward-prediction network to achieve multi-objective optimization for characteristic impedance, insertion loss, and FEXT by optimizing the trace width, trace spacing, and pair-topair distance. Further, by incorporating an integer programming technique, parameter optimization of multilayer PCBs, including the PCB stackup and design parameters of each signal layer, can be accomplished in seconds, much more efficiently than the conventional optimization approaches.more » « less
-
Modern high-frequency electronic systems demand precise characterization and modeling techniques to ensure signal integrity and electromagnetic compatibility. This thesis presents three core studies focused on real-world challenges in high-speed and power electronics: EMI mitigation using 3D printed absorbers, wideband liquid dielectric charac- terization, and accurate transformer modeling. The first study demonstrates a targeted approach to mitigating electromagnetic in- terference (EMI) in a commercial router. By using holography imaging to identify radiation hotspots, custom absorber structures were designed with commercially available materials, fabricated via 3D printing, and applied directly to emission sources. Radiated emission tests in a reverberation chamber showed up to 9 dB reduction in EMI, validating the method’s effectiveness for practical applications. The second study proposes a wideband method (up to 30 GHz) to characterize liquid dielectrics using a differential microstrip line and the Djordjevic-Sarkar model. Dielectric constant (DK) and dissipation factor (Df) were extracted by comparing S-parameters of air and liquid-immersed conditions between measurement and simulation results. Experi- mental validation with PAO4 and DC-15 liquids showed strong agreement with traditional cavity resonance methods, with DK deviations under 1.5%. The third study addresses transformer modeling across 100 kHz to 30 MHz by developing an equivalent circuit model that accurately captures winding effects, parasitic capacitance, and leakage inductance. The approach incorporates an optimized coupling coefficient based on physical parameters. Validation with air-core inductors demonstrated high model accuracy, with an average relative error of 2.2%.more » « less
-
This paper presents an enhanced closed-form approach for modeling and optimizing high-frequency PCB vias, implemented in Python and validated against industrystandard tools such as ADS and HFSS. The model incorporates resistance alongside inductance and capacitance to capture frequency-dependent losses and integrates non-functional pads (NFPs), demonstrating significant improvements in signal integrity by reducing reflections and enhancing return loss, particularly at 100 GHz. The methodology extends the frequency range of previous models from 100 GHz to 150 GHz, ensuring compatibility with next-generation standards like PCIe Gen 6. Validation results show insertion loss deviations under 3 dB and consistent return loss across the frequency range. The Python-based implementation offers a scalable and efficient solution for multilayer via designs, significantly reducing computational time compared to HFSS. This work provides a robust framework for high-speed PCB via modeling, with applications in academic research and industry, and includes future extensions to model differential signal vias.more » « less
-
ABSTRACT Thin CdTe photovoltaic device efficiencies show significant improvement with the incorporation of a CdSeTe alloy layer deposited between a MgZnO emitter and CdTe absorber. CdTe and CdSeTe/CdTe devices fabricated by close-space sublimation with a total absorber thickness of 1.5 µm are studied using microscopy measurements and show minimal diffusion of Se into the CdTe. Current loss analysis shows that the CdSeTe layer is the primary absorber in the CdSeTe/CdTe structure, and fill factor loss analysis shows that ideality-factor reduction is the dominant mechanism of fill factor loss. Improvement in the CdSeTe/CdTe absorber quality compared to CdTe is also reflected in spectral and time-resolved photoluminescence measurements. Current density vs. voltage measurements show an increase in current density of up to 2 mA/cm 2 with the addition of CdSeTe due to a band gap shift from 1.5 to 1.42 eV for CdTe and CdSeTe/CdTe absorbers respectively. Voltage deficit is lower with the incorporation of the CdSeTe layer, corroborated by improved electroluminescence intensity. The addition of CdSeTe into CdTe device structures has increased device efficiencies from 14.7% to 15.6% for absorbers with a total thickness less than two microns.more » « less
An official website of the United States government

