An official website of the United States government
Abstract Direct ethanol fuel cells have been widely investigated as nontoxic and low-corrosive energy conversion devices with high energy and power densities. It is still challenging to develop high-activity and durable catalysts for a complete ethanol oxidation reaction on the anode and accelerated oxygen reduction reaction on the cathode. The materials’ physics and chemistry at the catalytic interface play a vital role in determining the overall performance of the catalysts. Herein, we propose a Pd/Co@N-C catalyst that can be used as a model system to study the synergism and engineering at the solid-solid interface. Particularly, the transformation of amorphous carbon to highly graphitic carbon promoted by cobalt nanoparticles helps achieve the spatial confinement effect, which prevents structural degradation of the catalysts. The strong catalyst-support and electronic effects at the interface between palladium and Co@N-C endow the electron-deficient state of palladium, which enhances the electron transfer and improved activity/durability. The Pd/Co@N-C delivers a maximum power density of 438 mW cm −2 in direct ethanol fuel cells and can be operated stably for more than 1000 hours. This work presents a strategy for the ingenious catalyst structural design that will promote the development of fuel cells and other sustainable energy-related technologies.
more »
« less
This content will become publicly available on February 20, 2027
Modular multi-interface nanocrystals for enhanced ethanol oxidation electrocatalysis
Electrochemical processes that utilize biomass-derived ethanol as a source of electrons and protons offer a sustainable energy strategy, yet their practical implementation is limited by sluggish ethanol oxidation reaction (EOR) kinetics and catalyst poisoning. Here, we report a modular multi-interface nanocrystal catalyst comprising core/shell Co 2 P/Pd and Pd-Au heterostructured interfaces that exhibit complementary functions for the enhanced EOR catalysis. The Co 2 P/Pd interface boosts Pd atom utilization and lowers the kinetic barriers for ethanol-to-acetate conversion, while the Pd-Au interface effectively alleviates CO poisoning caused by C–C bond cleavage of ethanol. In-depth analyses using in situ attenuated total reflectance-surface-enhanced infrared absorption spectroscopy, differential electrochemical mass spectrometry, and density functional theory calculations elucidate the mechanistic roles of these interfaces. The optimized Co 2 P/Pd-Au 0.08 nanorods achieve an excellent mass activity, underscoring the potential of modular, multi-interface nanocrystals for advancing EOR catalysis and offering a generalizable strategy for broader catalytic innovations.
more »
« less
- Award ID(s):
- 2002158
- PAR ID:
- 10697472
- Publisher / Repository:
- CellPress
- Date Published:
- Journal Name:
- Matter
- Volume:
- 9
- Issue:
- 3
- ISSN:
- 2590-2385
- Page Range / eLocation ID:
- 102615
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Rational design and synthesis of efficient catalysts for electrochemical CO 2 reduction is a critical step towards practical CO 2 electrolyzer systems. In this work, we report a strategy to tune the catalytic property of a metallic Pd catalyst by coating its surface with a polydiallyldimethyl ammonium (PDDA) polymer layer. The resulting PDDA-functionalized Pd/C catalysts exhibit an enhanced CO faradaic efficiency of ∼93% together with a current density of 300 mA cm −2 at −0.65 V versus reversible hydrogen electrode in comparison to non-functionalized and commercial Pd/C catalysts. X-ray photoelectron spectroscopy analysis reveals that the improvement can be attributed to the electron transfer from the quaternary ammonium groups of PDDA to Pd nanoparticles, weakening the CO binding energy on Pd. The weak CO adsorption on Pd was further confirmed by the CO temperature programmed desorption measurement and operando attenuated total reflection-Fourier-transform infrared analysis. Therefore, the incorporation of electron-donating groups could be an effective strategy to decrease the CO binding energy of a metallic catalyst for a high CO selectivity in CO 2 electroreduction.more » « less
-
Acetic acid (AA), an important commodity chemical, is produced via methanol carbonylation, emitting one ton of CO₂ per ton of product. As a sustainable alternative, we report the electrochemical oxidation of bioethanol to selectively produce AA using a novel Pdsingle bondSn alloy catalyst with nanodendritic morphology supported on nickel foam (PdSn@NF). The catalyst was synthesized via electrodeposition, and the presence of ammonium chloride in the deposition bath was found to critically affect the Pd-to-Sn ratio and, consequently, the catalyst performance. The vital role of catalyst structure, surface composition, and morphology on the activity and selectivity of PdSn@NF towards the EOR was revealed by X-ray diffractometry, emission spectroscopy, and electron microscopy. Specifically, the nanodendritic morphology of the PdSn@NF resulted in the formation of highly active undercoordinated sites, while in situ Raman spectroscopy suggested that Sn helps mitigate CO poisoning – likely a result of a lowered d-band center. Due to the strong synergy between the structural and electronic properties of PdSn@NF, ~100 % faradaic efficiency (FE) to AA at 400 mA cm−2 was achieved with lab-grade ethanol (LGE) in an H-type cell. In continuous flow operation, the FE declined due to product accumulation on active sites; however, this was mitigated by employing current pulses to remove surface-bound products. An optimized pulsing protocol restored ~100 % FE of AA for LGE and achieved ~94 % FE with bioethanol at 400 mA cm−2 despite the presence of fermentation impurities. This study underscores the promise of PdSn@NF as a highly selective and industrially relevant electrocatalyst for sustainable AA production.more » « less
-
Pd nanoparticles anchored on Nb-doped TiO 2 with functionalized carbon support (denoted as Pd/Nb–TiO 2 –C) is synthesized through a controllable hydrolysis and impregnation method. The as-synthesized catalyst is characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Pd nanoparticles exhibit a uniform distribution with an average particle size of 3 nm. The electrochemical performance is tested by cyclic voltammetry (CV) and chronoamperometry (CA). Compared with Pd supported by functionalized carbon (Pd/C), Pd/Nb–TiO 2 –C demonstrates 15.7% higher metallic Pd content, 23% higher electrochemical active surface area, 75% higher current density in ethanol electro-oxidation, 5% higher durability, and better tolerance of carbonaceous species. The performance enhancement is attributed to the increased conductivity from Nb-doping and the synergistic effect between Pd and TiO 2 .more » « less
-
Multi-component materials are a new trend in catalyst development for electrochemical CO 2 reduction. Understanding and managing the chemical interactions within a complex catalyst structure may unlock new or improved reactivity, but is scientifically challenging. We report the first example of capping ligand-dependent metal–oxide interactions in Au/SnO 2 structures for electrocatalytic CO 2 reduction. Cetyltrimethylammonium bromide capping on the Au nanoparticles enables bifunctional CO 2 reduction where CO is produced at more positive potentials and HCOO − at more negative potentials. With citrate capping or no capping, the Au–SnO 2 interactions steer the selectivity toward H 2 evolution at all potentials. Using electrochemical CO oxidation as a probe reaction, we further confirm that the metal–oxide interactions are strongly influenced by the capping ligand.more » « less
