Abstract This study presented the use of SrTiO3/Y2O3nanoparticles for the reinforcement of dental poly(methyl methacrylate) (PMMA) to enhance its mechanical properties important for everyday use of denture base materials. The average crystallite size of prepared nanoparticles was 19.9 nm. The influence of 0.5, 1.0, and 1.5 wt% SrTiO3/Y2O3loading on absorbed impact energy, microhardness and tensile properties was investigated. Scanning electron microscopy of the composite fracture surface revealed multiple toughening mechanisms, with agglomerates directly included in the crack pinning, indicating improvement in mechanical performance. Dynamic mechanical analysis proved that agglomerates improved the elastic behavior of PMMA and confirmed the absence of a residual monomer. After the incorporation of SrTiO3/Y2O3, the mechanical properties of composites showed a high increase compared to neat PMMA. The optimal concentration of nanoparticles was 1 wt%, for which the microhardness, modulus of elasticity, and absorbed impact energy were higher by 218.4%, 65.8% and 135.6%, respectively. With such a high increase, this research showed that SrTiO3/Y2O3represents an efficient filler which use does not have to be limited to dental materials. HighlightsSrTiO3/Y2O3hybrid nanoparticles were prepared.PMMA‐SrTiO3/Y2O3composite showed increase in impact resistance up to 135.4%.Elastic behavior of PMMA was improved.With 1 wt% of SrTiO3/Y2O3, microhardness increased by 218.4%.
more »
« less
This content will become publicly available on January 1, 2027
Strong paramagnetic correlation in a matrix of spin crossover molecules plus polyaniline
To investigate the paramagnetic correlation lengths by XMCD, in a polyaniline plus a spin crossover molecular complex, dilute concentrations of magnetic nickel cobaltite (NiCo2O4) nanoparticles were added to the bimolecular mixture.
more »
« less
- PAR ID:
- 10702755
- Publisher / Repository:
- Royal Society of Chemistry
- Date Published:
- Journal Name:
- Journal of Materials Chemistry C
- ISSN:
- 2050-7526
- Subject(s) / Keyword(s):
- paramagnetic, spin crossover
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract In this report, a facile wet chemical method using acetonitrile combined with thermal annealing was used to prepare Li2S‐P2S5(LPS) based glass‐ceramic electrolytes with (1 wt%, 3 wt%, and 5 wt% Ce2S3) and without Ce2S3doping. The crystal structure, ionic conductivity, and chemical stability of Li7P3S11glass‐ceramic electrolytes were examined at varying temperatures (250–350°C). The results indicated that the highest ionic conductivity of 3.15 × 10−4S cm−1for pure Li7P3S11was observed at a temperature of 325°C. By incorporating 1 wt% Ce2S3and subjecting it to a heat treatment at 250°C, the glass ceramic electrolyte attained a remarkable ionic conductivity of 7.7 × 10−4(S cm−1) at 25°C. Furthermore, it exhibited a stable and extensive electrochemical potential range, reaching up to 5 volts when compared to the Li/Li+reference electrode. By tuning the glass transition and crystallization temperature, cerium doping seems to make Li7P3S11more chemically stable, compared to its original 70Li2S‐30P2S5counterpart. According to Raman and X‐ray photoelectron spectroscopy analyses, cerium doping inhibits the decomposition of highly conductive P2S74‐(pyro‐thiophosphate) to PS43−and P2S64−. Doped LPS has a greater crystallinity and more uniform microstructure than pure LPS, according to XRD, Raman spectroscopy, and scanning electron microscopy analysis. Consequently, Li7P2.9Ce0.1S11electrolyte shows great potential as a solid‐state electrolyte for constructing high‐performance sulfide‐based all‐solid‐state batteries.more » « less
-
Abstract Reactions oftrans‐[Rh(CO)(Cl){P{(CH2)14}3P2(Rh–P2)}] (1) with ZnPh2, MeLi, or NaBH4give the chloride‐substitution productstrans‐[Rh(CO)(Ph){P{(CH2)14}3P2(Rh–P2)}] (3, 89 %),trans‐[Rh(CO)(Me){P{(CH2)14}3P2(Rh–P2)}] (94 %, 92 % purity), andtrans‐[Rh(CO)(H2BH2){P{(CH2)14}3P2(Rh–P2)}] (5, 99 %). The crystal structures of3,5, and the corresponding (fortuitously obtained) bromide complex are determined, and the ability of the X–Rh–CO moieties to rotate is interpreted in terms of their effective radii and the void space within the dibridgehead diphosphine cage. Reaction of1and excess PMe3gives the diphosphine substitution producttrans‐[Rh(CO)(Cl)(PMe3)2] (89 %) and the dibridgehead diphosphine P[(CH2)14]3P (58 %). Complex5serves as a catalyst precursor for the hydroformylation of 1‐octene (neat or THF, 60 °C, 75 psig 1:1 CO/H2). The locus of catalysis with respect to the diphosphine cage is discussed.more » « less
-
The crystal structures of the polyynestrans,trans‐(C6F5)(p‐tol3P)2Pt(C≡C)14Pt(Pp‐tol3)2(C6F5) (PtC28Pt) andtrans,trans‐(C6F5)(Me3P)2Pt(C≡C)4Pt(PMe3)2(C6F5) (Pt*C8Pt*) are described. The former is available by a reported oxidative homocoupling and the latter by a fourfold Pp‐tol3/PMe3substitution. The former represents the longest conjugated polyyne structurally characterized to date, and “near misses” involving higher homologs are detailed. The difference between the average C≡C and CC bond lengths (bond length alternation (BLA)) ofPtC28Pt(1.217 and 1.338 Å;BLA(avg) 0.121 Å) is diminished relative to those ofPt*C8Pt*(1.240 and 1.370 Å; BLA(avg) 0.130 Å) or the Pp‐tol3analog (1.231 and 1.358 Å; BLA(avg) 0.127 Å). Implications for the electronic structure of the sp carbon allotrope carbyne are discussed. In both new structures, all platinum–platinum vectors run parallel, but there are two distinct sets, offset by ≈14 and ≈5 sp carbon atoms, respectively. Within a set, the chains are well separated, butPtC28Ptexhibits 3.47 Å van der Waals contacts between sets. Considering all literature data, still higher polyynes are viewed as more challenging to crystallographically characterize, but not impossible.more » « less
-
Abstract Membrane trafficking is regulated by phosphoinositides (PI) and their modification. The endolysosomal pathway is controlled by PI3P, PI(4,5)P2and PI(3,5)P2, whereas a role for PI(3,4,5)P3is less clear. We report that yeast vacuoles produce PI(3,4,5)P3through Vps34 activity. In vitro assays showed that dioctanoyl (C8) PI(3,4,5)P3or the PI(3,4,5)P3-binding domain Grp1-PH blocked fusion. Furthermore, modifying endogenous PI(3,4,5)P3with the phosphatase PTEN abolished fusion. Fluorescence microscopy showed that PI(3,4,5)P3was present at the plasma membrane and the vertex microdomains of vacuoles. PI(3,4,5)P3staining was blocked by PTEN, C8-PI(3,4,5)P3, the Vps34 inhibitor SAR405 and aVPS34temperature sensitive mutation. Importantly, blocking or eliminating PI(3,4,5)P3prevented the vertex enrichment of Ypt7 and the HOPS subunit Vps33. Finally, we show that the SNARE Vam7 binds PI(3,4,5)P3and that both Grp1-PH and PTEN displaced it from membranes to block trans-SNARE pairing. Our results demonstrate that vacuolar PI(3,4,5)P3coordinates vertex assembly and SNARE function.more » « less
An official website of the United States government
