An official website of the United States government
Due to their compliant mechanics, many soft and flexible robots are well-suited to operate in confined spaces that challenge traditional legged and wheeled robots. In particular, undulatory and peristaltic robots excel in enclosed tunnels and pipes, as their locomotion methods and compliance allow them to wriggle and squeeze through narrowings and gaps. However, these environments frequently contain features that are impassable with passive deformation alone, such as sharp turns and T-junctions. In this work, we developed the first closed-loop, peristaltic turning algorithm that scales turning angle based on contact force feedback in confined spaces. We verified the controller’s effectiveness using a dynamic model of a soft worm robot as our test platform. The model was sent through pipe bends with varying radii of curvature, diameters, and geometries, using both open-loop and closed-loop controllers. The different turning strategies were compared using speed and the cost of transport (COT) as the primary metrics. Our adaptive algorithm was the only turning method which maintained high speed performance across all bends tested. The model averaged just a 1.6% loss in speed compared to the best fixed turning angle strategy for each pipe curvature. Adaptive turning also allowed the model to traverse small radius of curvature (ROC) bends (0.5 and 0.6 m) in which the model became stuck when using straightline locomotion. Furthermore, of the controllers we tested, adaptive turning offered the lowest COT in most pipe bend geometries. We also showed that the controller could autonomously transition from left to right turns (and vice versa) and adjust to a spiral turn with a continuously changing ROC. A worm robot with this controller, these sensors, and turning capabilities would be well equipped for operation in a wide variety of unstructured and confined environments.
more »
« less
This content will become publicly available on October 6, 2026
A 3D model predicts behavior of a soft bodied worm robot performing peristaltic locomotion
The passive compliance of a soft worm-like body can be a key advantage for traversal of complex confined spaces, but in practice, the body’s stiffness and contact friction often require experimental adjustments. Here, for the first time, we develop a dynamic, 3D simulation that enables systematic testing of robot parameters (e.g. stiffness and friction) in different radius of curvature environments, which will help us better understand design trade-offs in creating soft robots that mimic worm-like locomotion. Specifically, we use the open-source physics engine MuJoCo because it is established for both biomechanical and robotic modeling, as well as multi-point contact dynamics, which are present in confined spaces. The model has sensory capabilities analogous to the stretch and tactile proprioception of an earthworm and is amenable to both feedforward and feedback control. After validating our model by comparing to our previous physical robot, we quantify locomotion performance over a range of friction coefficients, structural stiffnesses, and turning radii. We found that speed increased with friction coefficient on flat ground for higher stiffness models, but decreased with friction coefficient for lower stiffness models, both on flat ground and in pipe bends. For turning radii greater than 0.45 m, speed and stiffness also had a positive correlation, however, below the critical turning radius of 0.45 m, increasing stiffness had no appreciable influence on speed. This simulation can potentially be used to optimize designs for particular environments, to better understand the influence of passive vs. active control on individual and coupled segments, and perhaps offer a deeper understanding of how animals and robots can employ soft structures. For example, we can posit from our results that changing stiffness will not increase speed below the critical turning radius, meaning further experiments should focus on other parameters or actively controlled turning to improve speed through tighter turns.
more »
« less
- PAR ID:
- 10703496
- Publisher / Repository:
- IOP
- Date Published:
- Journal Name:
- Bioinspiration & Biomimetics
- Volume:
- 20
- Issue:
- 6
- ISSN:
- 1748-3182
- Page Range / eLocation ID:
- 066001
- Format(s):
- Medium: X
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
Abstract Soft, worm-like robots show promise in complex and constrained environments due to their robust, yet simple movement patterns. Although many such robots have been developed, they either rely on tethered power supplies and complex designs or cannot move external loads. To address these issues, we here introduce a novel, maggot-inspired, magnetically driven “mag-bot” that utilizes shape memory alloy-induced, thermoresponsive actuation and surface pattern-induced anisotropic friction to achieve locomotion inspired by fly larvae. This simple, untethered design can carry cargo that weighs up to three times its own weight with only a 17% reduction in speed over unloaded conditions thereby demonstrating, for the first time, how soft, untethered robots may be used to carry loads in controlled environments. Given their small scale and low cost, we expect that these mag-bots may be used in remote, confined spaces for small objects handling or as components in more complex designs.more » « less
-
Abstract Soft earthworm‐like robots that exhibit mechanical compliance can, in principle, navigate through uneven terrains and constricted spaces that are inaccessible to traditional legged and wheeled robots. However, unlike the biological originals that they mimic, most of the worm‐like robots reported to date contain rigid components that limit their compliance, such as electromotors or pressure‐driven actuation systems. Here, a mechanically compliant worm‐like robot with a fully modular body that is based on soft polymers is reported. The robot is composed of strategically assembled, electrothermally activated polymer bilayer actuators, which are based on a semicrystalline polyurethane with an exceptionally large nonlinear thermal expansion coefficient. The segments are designed on the basis of a modified Timoshenko model, and finite element analysis simulation is used to describe their performance. Upon electrical activation of the segments with basic waveform patterns, the robot can move through repeatable peristaltic locomotion on exceptionally slippery or sticky surfaces and it can be oriented in any direction. The soft body enables the robot to wriggle through openings and tunnels that are much smaller than its cross‐section.more » « less
-
Soft-bodied animals, such as earthworms, are capable of contorting their body to squeeze through narrow spaces, create or enlarge burrows, and move on uneven ground. In many applications such as search and rescue, inspection of pipes and medical procedures, it may be useful to have a hollow-bodied robot with skin separating inside and outside. Textiles can be key to such skins. Inspired by earthworms, we developed two new robots: FabricWorm and MiniFabricWorm. We explored the application of fabric in soft robotics and how textile can be integrated along with other structural elements, such as three-dimensional (3D) printed parts, linear springs, and flexible nylon tubes. The structure of FabricWorm consists of one third the number of rigid pieces as compared to its predecessor Compliant Modular Mesh Worm-Steering (CMMWorm-S), while the structure of MiniFabricWorm consists of no rigid components. This article presents the design of such a mesh and its limitations in terms of structural softness. We experimentally measured the stiffness properties of these robots and compared them directly to its predecessors. FabricWorm and MiniFabricWorm are capable of peristaltic locomotion with a maximum speed of 33 cm/min (0.49 body-lengths/min) and 13.8 cm/min (0.25 body-lengths/min), respectively.more » « less
-
Recent studies on dynamic legged locomotion have focused on incorporating passive compliant elements into robot legs which can help with energy efficiency and stability, enabling them to work in wide range of environments. In this work, we present the design and testing of a soft robotic foot capable of active stiffness control using granular jamming. This foot is designed and tested to be used on soft, flowable ground such as sand. Granular jamming feet enable passive foot shape change when in contact with the ground for adaptability to uneven surfaces, and can also actively change stiffness for the ability to apply sufficient propulsion forces. We seek to study the role of shape change and stiffness change in foot-ground interactions during foot-fall impact and shear. We have measured the acceleration during impact, surface traction force, and the force to pull the foot out of the medium for different states of the foot. We have demonstrated that the control of foot stiffness and shape using the proposed foot design leads to improved locomotion, specifically an approximately 52% reduced foot deceleration at the joints after impact, an approximately 63% reduced depth of penetration in the sand on impact, higher shear force capabilities for a constant depth above the ground, and an approximately 98% reduced pullout force compared to a rigid foot.more » « less
