Soft growing robots, commonly referred to as vine robots, have demonstrated a remarkable ability to interact safely and robustly with unstructured and dynamic environments. It is therefore natural to exploit contact with the environment for planning and design optimization tasks. Previous research has focused on planning under contact for passively deforming robots with preformed bends. However, adding active steering to these soft growing robots is necessary for successful navigation in more complex environments. To this end, we develop a unified modeling framework that integrates vine robot growth, bending, actuation, and obstacle contact. We extend the beam moment model to include the effects of actuation on kinematics under growth and then use these models to develop a fast parallel simulation framework. We validate our model and simulator with real robot experiments. To showcase the capabilities of our framework, we apply our model in a design optimization task to find designs for vine robots navigating through cluttered environments, identifying designs that minimize the number of required actuators by exploiting environmental contacts. We show the robustness of the designs to environmental and manufacturing uncertainties. Finally, we fabricate an optimized design and successfully deploy it in an obstacle-rich environment.
more »
« less
This content will become publicly available on March 1, 2027
Physical Coupling for Collaboration in Heterogeneous Robot Teams
Soft robots excel in adaptability, and rigid robots in precise, forceful actuation, yet each faces limitations that reduce performance in cluttered or constrained settings. We address these gaps by enabling physical coupling between a soft Vine robot and centimeter-scale RESCUE roller robots, allowing heterogeneous teams to work cooperatively to leverage each other’s strengths. Our approach improves mobility, enables power sharing, and communication through mechanical interfaces, modular chain formation, and high-speed recharging and data transfer via electrical contact using magnetic connectors. RESCUE rollers can form chains for collaborative locomotion and load distribution, and seamlessly integrate with the Vine robot to extend its workspace. In return, the Vine robot serves as a mobile power and communication hub, recharging rollers and relaying data to extend operational time. Experimental validation includes measurements of pushing and pulling strength in roller chains (Section III-A), Vine robot buckling under load (Section III-B), and demonstrations of Vine robot and RESCUE rollers interactions in a cluttered environment (Section IV-A), tight turning of the Vine robot using rollers (Section IV-B), and in-field recharging of RESCUE rollers (Section IV-C). This work advances cooperative strategies for heterogeneous robotic systems, enabling adaptable and resilient performance in challenging environments.
more »
« less
- PAR ID:
- 10707581
- Publisher / Repository:
- IEEE
- Date Published:
- Journal Name:
- IEEE Robotics and Automation Letters
- Volume:
- 11
- Issue:
- 3
- ISSN:
- 2377-3774
- Page Range / eLocation ID:
- 2881 to 2888
- Subject(s) / Keyword(s):
- Sponsoring Org:
- National Science Foundation
More Like this
-
-
null (Ed.)Soft, tip-extending devices, or “vine robots,” are a promising new paradigm for navigating cluttered and confined environments. Because they lengthen from their tips, there is little relative movement of the body with the environment, and the compressible nature of the device allows it to pass through orifices smaller than its diameter. However, the interaction between these devices and the environment is not well characterized. Here we present a comprehensive mathematical model that describes vine robot behavior during environmental interaction that provides a basis from which informed designs can be generated in future works. The model incorporates transverse and axial buckling modes that result from growing into obstacles with varying surface normals, as well as internal path-dependent and independent resistances to growth. Accordingly, the model is able to predict the pressure required to grow through a given environment due to the interaction forces it experiences. We experimentally validate both the individual components and the full model. Finally, we present three design insights from the model and demonstrate how they each improve performance in confined space navigation. Our work helps advance the understanding of tip-extending, vine robots through quantifying their interactions with the environment, opening the door for new designs and impactful applications in the realms of healthcare, research, search and rescue, and space exploration.more » « less
-
For robots to be useful for real-world applications, they must be safe around humans, be adaptable to their environment, and operate in an untethered manner. Soft robots could potentially meet these requirements; however, existing soft robotic architectures are limited by their ability to scale to human sizes and operate at these scales without a tether to transmit power or pressurized air from an external source. Here, we report an untethered, inflated robotic truss, composed of thin-walled inflatable tubes, capable of shape change by continuously relocating its joints, while its total edge length remains constant. Specifically, a set of identical roller modules each pinch the tube to create an effective joint that separates two edges, and modules can be connected to form complex structures. Driving a roller module along a tube changes the overall shape, lengthening one edge and shortening another, while the total edge length and hence fluid volume remain constant. This isoperimetric behavior allows the robot to operate without compressing air or requiring a tether. Our concept brings together advantages from three distinct types of robots—soft, collective, and truss-based—while overcoming certain limitations of each. Our robots are robust and safe, like soft robots, but not limited by a tether; are modular, like collective robots, but not limited by complex subunits; and are shape-changing, like truss robots, but not limited by rigid linear actuators. We demonstrate two-dimensional (2D) robots capable of shape change and a human-scale 3D robot capable of punctuated rolling locomotion and manipulation, all constructed with the same modular rollers and operating without a tether.more » « less
-
null (Ed.)Soft, tip-extending "vine" robots offer a unique mode of inspection and manipulation in highly constrained environments. For practicality, it is desirable that the distal end of the robot can be manipulated freely, while the body remains stationary. However, in previous vine robots, either the shape of the body was fixed after growth with no ability to manipulate the distal end, or the whole body moved together with the tip. Here, we present a concept for shape-locking that enables a vine robot to move only its distal tip, while the body is locked in place. This is achieved using two inextensible, pressurized, tip-extending, chambers that "grow" along the sides of the robot body, preserving curvature in the section where they have been deployed. The length of the locked and free sections can be varied by controlling the extension and retraction of these chambers. We present models describing this shape-locking mechanism and workspace of the robot in both free and constrained environments. We experimentally validate these models, showing an increased dexterous workspace compared to previous vine robots. Our shape-locking concept allows improved performance for vine robots, advancing the field of soft robotics for inspection and manipulation in highly constrained environments.more » « less
-
null (Ed.)Continuum robots have high degrees of freedom and the ability to safely move in constrained environments. One class of soft continuum robot is the “vine” robot. This type of robot extends from its tip by everting or unfurling new material, driven by internal body pressure. Most vine robot examples store new body material in a reel at their base, passing it through the core of the robot to the tip, and like many continuum robots, steer by selectively lengthening or shortening one side of the body. While this approach to steering and material storage lends itself to a fully soft device, it has three key limitations: (i) internal friction of material passing through the core of the robot limits its length in tortuous paths, (ii) body buckling as the robot's body material is re-spooled at the base can prevent retraction, and (iii) constant curvature steering limits the robot's poses and object approach angles in a given workspace. This letter presents a hybrid soft-rigid robotic system comprising a soft vine robot body and a rigid, mobile, internal steering-reeling mechanism (SRM); this SRM is equipped with a reel for material storage, a bending actuator for steering, and is capable of actuating the robot at any point along its length. This hybrid configuration increases reach along tortuous paths, allows retraction, and increases the workspace. We describe the motivation for the device, generate its mathematical models, present its methods of operation, and verify experimentally the models we developed and the performance improvements over previous vine robots.more » « less
An official website of the United States government
