This content will become publicly available on August 7, 2027

Title: High temperature oxidation of a microwave plasma-synthesized high-entropy diboride
Not AvailableHigh-entropy diboride ceramics are promising for ultra-high-temperature applications. However, their oxidation mechanisms and kinetics require further investigation. This study reports a hydrogen-assisted microwave plasma (HAMP) synthesis route for high-entropy diboride, (Hf0.2Mo0.2Ta0.2Ti0.2Zr0.2)B2 from metal-oxide precursors. Atomic hydrogen generated in the microwave plasma promotes efficient reduction of the metal oxide precursors, enabling direct synthesis of a single-phase AlB2-type high-entropy diboride. Further densification by spark plasma sintering resulted in ∼95% relative density while maintaining a uniform elemental distribution. Oxidation behavior was investigated up to 1300°C using thermogravimetric analysis under continuous heating. The diboride exhibits continuous mass gain across oxidation ranges, attributed to development of a composite oxide scale. Kinetic analysis shows temperature-dependent shifts in oxidation mechanisms, supported by phase and microstructural characterization. Despite containing oxidation-sensitive elements, the diboride exhibits oxidation resistance comparable to HfB2. These findings highlight the role of multicomponent interactions and hydrogen-assisted plasma chemistry on oxidation behavior in high-entropy diborides.  more » « less
Award ID(s):
2203112 2116564
PAR ID:
10714336
Author(s) / Creator(s):
; ; ; ; ; ; ;
Publisher / Repository:
Elsevier Ltd.
Date Published:
Journal Name:
Journal of the European Ceramic Society
Volume:
47
Issue:
1
ISSN:
0955-2219
Page Range / eLocation ID:
118749
Subject(s) / Keyword(s):
High entropy diborides Hydrogen-assisted microwave plasma synthesis Thermogravimetric analysis Oxidation kinetics
Sponsoring Org:
National Science Foundation
More Like this
  1. A unique approach was used to synthesize the high entropy alloy MoNbTaVW via reduction of metal-oxide precursors in a microwave plasma. The metal-oxides underwent ball milling and consolidation before plasma annealing at 1800 °C for 1 h with hydrogen as feedgas. X-ray diffraction, scanning electron microscopy/energy dispersive x-ray analysis, and Vickers hardness testing reveal characteristics of the high-entropy alloy. This includes a predominantly single-phase body-centered cubic structure, homogeneous distribution of all five metals, and 6.8 ± 0.9 GPa hardness, comparable with other reports for the same five-metal high entropy alloy configuration. Localized microwave plasma particle sintering is evident from the microstructure. These results highlight the promising potential of microwave plasma as a fast, economical, and flexible processing tool for high entropy alloys. 
    more » « less
  2. null (Ed.)
    A novel approach is demonstrated for the synthesis of the high entropy transition metal boride (Ta, Mo, Hf, Zr, Ti)B2 using a single heating step enabled by microwave-induced plasma. The argon-rich plasma allows rapid boro-carbothermal reduction of a consolidated powder mixture containing the five metal oxides, blended with graphite and boron carbide (B4C) as reducing agents. For plasma exposure as low as 1800 °C for 1 h, a single-phase hexagonal AlB2-type structure forms, with an average particle size of 165 nm and with uniform distribution of the five metal cations in the microstructure. In contrast to primarily convection-based (e.g., vacuum furnace) methods that typically require a thermal reduction step followed by conversion to the single high-entropy phase at elevated temperature, the microwave approach enables rapid heating rates and reduced processing time in a single heating step. The high-entropy phase purity improves significantly with the increasing of the ball milling time of the oxide precursors from two to eight hours. However, further improvement in phase purity was not observed as a result of increasing the microwave processing temperature from 1800 to 2000 °C (for fixed ball milling time). The benefits of microwave plasma heating, in terms of allowing the combination of boro-carbothermal reduction and high entropy single-phase formation in a single heating step, are expected to accelerate progress in the field of high entropy ceramic materials. 
    more » « less
  3. We investigate the synthesis of the high entropy boride (HEB), MoNbTaVWB10, in a highly reactive environment facilitated by hydrogen feedgas in microwave plasma (MW plasma). Dissociation of molecular hydrogen to form copious amounts of atomic hydrogen allows efficient reduction of the metal oxide precursors with less excess boron needed for HEB formation than if an Ar-rich feedgas is used. This study demonstrates that hydrogen plasma promotes the hexagonal AlB2-type structure at temperatures as low as 1500C, achieving a predominantly single -phase structure at 1750C. In both environments, hardness and surface topography of the HEBs are measured, highlighting the enhanced effectiveness of the reactive feedgas in the synthesis process. XRD analysis confirms the enhanced reduction efficiency and phase purity facilitated by atomic hydrogen, while SEM/EDX reveals improved elemental uniformity and minimized vanadium sublimation. Compared to argon-rich plasma, hydrogen plasma results in larger grain sizes and reduced microstrain, underscoring its role in optimizing the microstructure and synthesis of HEBs. The findings show the advantages of a reactive synthesis environment for sustainable and efficient metallurgical process, enabling advanced material applications. 
    more » « less
  4. Microwave-induced plasma was used to anneal precursor powders containing five metal oxides with carbon and boron carbide as reducing agents, resulting in high entropy boride ceramics. Measurements of hardness, phase structure, and oxidation resistance were investigated. Plasma annealing for 45 min in the range of 1500–2000 °C led to the formation of predominantly single-phase (Hf, Zr, Ti, Ta, Mo)B2 or (Hf, Zr, Nb, Ta, Mo)B2 hexagonal structures characteristic of high entropy borides. Oxidation resistance for these borides was improved by as much as a factor of ten when compared to conventional commercial diborides. Vickers and nanoindentation hardness measurements show the indentation size effect and were found to be as much as 50% higher than that reported for the same high entropy boride configuration made by other methods, with average values reaching up to 38 GPa (for the highest Vickers load of 200 gf). Density functional theory calculations with a partial occupation method showed that (Hf, Zr, Ti, Ta, Mo)B2 has a higher hardness but a lower entropy forming ability compared to (Hf, Zr, Nb, Ta, Mo)B2, which agrees with the experiments. Overall, these results indicate the strong potential of using microwave-induced plasma as a novel approach for synthesizing high entropy borides. 
    more » « less
  5. Non-stoichiometric perovskite oxides have been studied as a new family of redox oxides for solar thermochemical hydrogen (STCH) production owing to their favourable thermodynamic properties. However, conventional perovskite oxides suffer from limited phase stability and kinetic properties, and poor cyclability. Here, we report a strategy of introducing A-site multi-principal-component mixing to develop a high-entropy perovskite oxide, (La1/6Pr1/6Nd1/6Gd1/6Sr1/6Ba1/6)MnO3 (LPNGSB_Mn), which shows desirable thermodynamic and kinetics properties as well as excellent phase stability and cycling durability. LPNGSB_Mn exhibits enhanced hydrogen production (∼77.5 mmol/mol-oxide) compared to (La2/3Sr1/3)MnO3 (∼53.5 mmol / mol-oxide) in a short 1 hour redox duration and high STCH and phase stability for 50 cycles. LPNGSB_Mn possesses a moderate enthalpy of reduction (252.51–296.32 kJ / mol-oxide), a high entropy of reduction (126.95–168.85 J / mol-oxide), and fast surface oxygen exchange kinetics. All A-site cations do not show observable valence changes during the reduction and oxidation processes. This research preliminarily explores the use of one A-site high-entropy perovskite oxide for STCH. 
    more » « less