%AXie, Jiayin [Department of Mechanical Engineering, Stony Brook University, Stony Brook, NY 11794]%ABi, Chenghao [School of Mechanical Engineering, Purdue University, West Lafayette, IN 47907]%ACappelleri, David [School of Mechanical Engineering, Purdue University, West Lafayette, IN 47907]%AChakraborty, Nilanjan [Department of Mechanical Engineering, Stony Brook University, Stony Brook, NY 11794]%BJournal Name: Journal of Mechanisms and Robotics; Journal Volume: 13; Journal Issue: 4 %D2021%I %JJournal Name: Journal of Mechanisms and Robotics; Journal Volume: 13; Journal Issue: 4 %K %MOSTI ID: 10309215 %PMedium: X %TDynamic Simulation-Guided Design of Tumbling Magnetic Microrobots %XAbstract The design of robots at the small scale is a trial-and-error based process, which is costly and time-consuming. There are few dynamic simulation tools available to accurately predict the motion or performance of untethered microrobots as they move over a substrate. At smaller length scales, the influence of adhesion and friction, which scales with surface area, becomes more pronounced. Thus, rigid body dynamic simulators, which implicitly assume that contact between two bodies can be modeled as point contact, are not suitable. In this paper, we present techniques for simulating the motion of microrobots where there can be intermittent and non-point contact between the robot and the substrate. We use these techniques to study the motion of tumbling microrobots of different shapes and select shapes that are optimal for improving locomotion performance. Simulation results are verified using experimental data on linear velocity, maximum climbable incline angle, and microrobot trajectory. Microrobots with improved geometry were fabricated, but limitations in the fabrication process resulted in unexpected manufacturing errors and material/size scale adjustments. The developed simulation model can incorporate these limitations and emulate their effect on the microrobot’s motion, reproducing the experimental behavior of the tumbling microrobots, further showcasing the effectiveness of having such a dynamic model. %0Journal Article