Search for: All records

Abstract In this paper, we review scientific opportunities and challenges related to detection and reconstruction of low-energy (less than 100 MeV) signatures in liquid argon time-projection chamber (LArTPC) neutrino detectors. LArTPC neutrino detectors designed for performing precise long-baseline oscillation measurements with GeV-scale accelerator neutrino beams also have unique sensitivity to a range of physics and astrophysics signatures via detection of event features at and below the few tens of MeV range. In addition, low-energy signatures are an integral part of GeV-scale accelerator neutrino interaction final-states, and their reconstruction can enhance the oscillation physics sensitivities of LArTPC experiments. New physics signals from accelerator and natural sources also generate diverse signatures in the low-energy range, and reconstruction of these signatures can increase the breadth of Beyond the Standard Model scenarios accessible in LArTPC-based searches. A variety of experimental and theory-related challenges remain to realizing this full range of potential benefits. Neutrino interaction cross-sections and other nuclear physics processes in argon relevant to sub-hundred-MeV LArTPC signatures are poorly understood, and improved theory and experimental measurements are needed; pion decay-at-rest sources and charged particle and neutron test beams are ideal facilities for improving this understanding. There are specific calibration needs in the low-energy range, as well as specific needs for control and understanding of radiological and cosmogenic backgrounds. Low-energy signatures, whether steady-state or part of a supernova burst or larger GeV-scale event topology, have specific triggering, DAQ and reconstruction requirements that must be addressed outside the scope of conventional GeV-scale data collection and analysis pathways. Novel concepts for future LArTPC technology that enhance low-energy capabilities should also be explored to help address these challenges. 

Linking South and North America via a South Atlantic high-performance Research & Education Network (REN) with the nations of Africa’s researchers, students, and knowledge sharing communities has become an increasingly strategic priority. Africa offers research and education communities with unique biological, environmental, geological, anthropological, and cultural resources. Research challenges in atmospheric and geosciences, materials sciences, tropical diseases, biology, astronomy, and other disciplines will benefit by enhancing the technological and social connections between the research and education communities of the U.S., Brazil / Latin America, and Africa. For many years, we have seen the dramatic benefits of high-performance networking in all areas of science and engineering. The Americas Africa Research and eduCation Lightpaths (AARCLight) project (NSF OAC-1638990) provided support for a grant to plan, design, and define a strategy for high capacity research and education network connectivity between the U.S. and West Africa. The study indicated a high level of enthusiasm to engage in collaborative research between the U.S., Brazil, and the African communities. There is collaborative interest in sharing network infrastructure resources in the US at AMPATH in Miami, in Fortaleza and Sao Paulo, Brazil where RedClara and ANSP connect at SouthernLight, and in Cape Town, South Africa. There is strong evidence of multiple ongoing domain science projects between the U.S., Brazil, and Africa that would benefit from a new South Atlantic link. The results of this planning grant successfully supported the need to light a 100G pathway using the South Atlantic Cable System (SACS) connecting to AmLight-ExP in Fortaleza, Brazil, and via the West African Cable System (WACS) cable to the Cape Town, South Africa open exchange point. Based on these findings, AmLight-ExP , a high-performance R&E network supported by a consortium of participants and funding from the NSF is the steward of the SACS 100G link. With collaborative support from UbuntuNet Alliance, RNP, SANReN, and others, AmLight is taking steps to make this first South Atlantic R&E network path available to connect all three continents. This critical infrastructure establishes a new South Atlantic route to integrate with AmLight-ExP, adding resiliency to the global R&E network fabric by adding a new path to Africa and Europe from the southern hemisphere. The SACS cable, shown on Figure 1 as a purple dashed line between Fortaleza, Brazil, and Luanda, Angola, is the first east - west subsea cable in the South Atlantic. We will leverage network infrastructure in the southern hemisphere that is available to the R&E community including spectrum on Monet committed to the AmLight-ExP linking Miami, Fortaleza and São Paulo; a 100G Ethernet link on SACS; TENET’s capacity on WACS; the R&E exchange point in Cape Town-ZAOXI operated by SANReN (South African National Research Network) and TENET connected to WACS and the Ubuntunet Alliance Network connecting East Africa; and the South America eXchange R&E exchange point (SAX) in Fortaleza, operated by RNP and connected via AmLight-ExP via Monet to São Paulo and Miami. The paper will present 1) the key partners in the AmLight-SACS collaboration, 2) the activation plan, 3) how the network will be instrumented for performance measurements, and to capture data for network analytics, and 4) science drivers that will benefit from the use of a South Atlantic network route between the U.S., South America and West Africa. 

Linking South and North America via a South Atlantic high-performance Research & Education Network (REN) with the nations of Africa’s researchers, students, and knowledge sharing communities has become an increasingly strategic priority. Africa offers research and education communities with unique biological, environmental, geological, anthropological, and cultural resources. Research challenges in atmospheric and geosciences, materials sciences, tropical diseases, biology, astronomy, and other disciplines will benefit by enhancing the technological and social connections between the research and education communities of the U.S., Brazil / Latin America, and Africa. For many years, we have seen the dramatic benefits of high-performance networking in all areas of science and engineering. The Americas Africa Research and eduCation Lightpaths (AARCLight) project (NSF OAC-1638990) provided support for a grant to plan, design, and define a strategy for high capacity research and education network connectivity between the U.S. and West Africa. The study indicated a high level of enthusiasm to engage in collaborative research between the U.S., Brazil, and the African communities. There is collaborative interest in sharing network infrastructure resources in the US at AMPATH in Miami, in Fortaleza and Sao Paulo, Brazil where RedClara and ANSP connect at SouthernLight, and in Cape Town, South Africa. There is strong evidence of multiple ongoing domain science projects between the U.S., Brazil, and Africa that would benefit from a new South Atlantic link. The results of this planning grant successfully supported the need to light a 100G pathway using the South Atlantic Cable System (SACS) connecting to AmLight-ExP in Fortaleza, Brazil, and via the West African Cable System (WACS) cable to the Cape Town, South Africa open exchange point. Based on these findings, AmLight-ExP , a high-performance R&E network supported by a consortium of participants and funding from the NSF is the steward of the SACS 100G link. With collaborative support from UbuntuNet Alliance, RNP, SANReN, and others, AmLight is taking steps to make this first South Atlantic R&E network path available to connect all three continents. This critical infrastructure establishes a new South Atlantic route to integrate with AmLight-ExP, adding resiliency to the global R&E network fabric by adding a new path to Africa and Europe from the southern hemisphere. The SACS cable, shown on Figure 1 as a purple dashed line between Fortaleza, Brazil, and Luanda, Angola, is the first east - west subsea cable in the South Atlantic. We will leverage network infrastructure in the southern hemisphere that is available to the R&E community including spectrum on Monet committed to the AmLight-ExP linking Miami, Fortaleza, and São Paulo; a 100G Ethernet link on SACS; TENET’s capacity on WACS; the R&E exchange point in Cape Town-ZAOXI operated by SANReN (South African National Research Network) and TENET connected to WACS and the Ubuntunet Alliance Network connecting East Africa; and the South America eXchange R&E exchange point (SAX) in Fortaleza, operated by RNP and connected via AmLight-ExP via Monet to São Paulo and Miami. The paper will present 1) the key partners in the AmLight-SACS collaboration, 2) the activation plan, 3) how the network will be instrumented for performance measurements, and to capture data for network analytics, and 4) science drivers that will benefit from the use of a South Atlantic network route between the U.S., South America, and West Africa. 

It can take a domain scientist weeks to set up a circuit, meeting for hours with IT administrators to figure out exactly what is needed, approvals from their own campus along with the remote campuses to set up a simple circuit to transfer data between campuses on an ongoing basis. Talking about networks may as well be a foreign language to many domain scientists. As such, we need to make it easier for domain scientists to allocate and configure resources for scientific applications without needing to understand the details of bandwidth, circuits, and port numbers. This session will discuss the challenges in supporting domain science applications across long distances and multiple management domains. We will discuss the AtlanticWave/SDX project and how it approaches this problem, making it possible for a domain scientist with little networking know-how to create paths across an intercontinental network while making network administrators' lives easier in the process. We will focus on the tools being developed to manage the network, along with a practical demonstration spanning multiple SDN switches. 

Sub-Saharan Africa is the fastest growing region of international Internet capacity in the world. Content in Sub-Saharan Africa is increasing: Microsoft is bringing two new data centers to South Africa, and Google and Akamai have been installing caches. The demand for content distribution within Sub-Saharan Africa is growing as the number of data centers and caches increase. Strategic placement of local compute, storage and networking is increasingly important in response to demands in local content distribution growth. Internet eXchange Points (IXPs) are resources that play a central role in interconnecting many networks. In addition, their role has been expanding in importance for bringing content closer to end users. For example, as content traffic continues to rise, IXPs are in the foreground of the peering issues between content providers and access networks. IXPs are considered a natural resource to evolve into a SDX, because they offer a physical location where multiple networks meet to exchange traffic and to peer (exchange routes). This paper presents a Software-Defined Exchange as a novel internetworking paradigm to facilitate content distribution. A SDX facilitates sharing of compute, storage and networking resources among multiple independent administrative domains, such as ISPs, CDNs, or NRENs. A survey of the most relevant SDX studies and use cases for a SDX, including content distribution, will be presented. Finally, deployment considerations and projects implementing SDXs will be discussed. 

To interconnect research facilities across wide geographic areas, network operators deploy science networks, also referred to as Research and Education (R&E) networks. These networks allow experimenters to establish dedicated network connections between research facilities for transferring large amounts of data. Recently, R&E networks have started using Software-Defined Networking (SDN) and Software Defined Exchanges (SDX) for deploying these connections. AtlanticWave/SDX is a response to the growing demand to support end-to-end network services spanning multiple SDN domains. However, requesting these services is a challenging task for domain-expert scientists, because the interfaces of the R&E networks have been developed by network operators for network operators. In this paper, we propose interfaces that allow domain expert scientists to reserve resources of the scientific network using abstractions that focus on their data transfer needs for scientific workflow management. Recent trends in the networking field pursue better interfaces for requesting network services (e.g., intent-based networking). Although intents are sufficient for the needs of network operations, they are not abstract enough in most cases to be used by domain-expert scientists. This is an issue we are addressing in the AtlanticWave/SDX design: network operators and domain-expert scientists will have their own interfaces focusing on their specific needs. 

Poster Abstract: To interconnect research facilities across wide geographic areas, network operators deploy science networks, also referred to as Research and Education (R&E) networks. These networks allow experimenters to establish dedicated network connections between research facilities for transferring large amounts of data. Recently, R&E networks have started using Software-Defined Networking (SDN) and Software Defined Exchanges (SDX) for deploying these connections. AtlanticWave/SDX is a response to the growing demand to support end-to-end network services spanning multiple SDN domains. However, requesting these services is a challenging task for domain-expert scientists, because the interfaces of the R&E networks have been developed by network operators for network operators. In this paper, we propose interfaces that allow domain expert scientists to reserve resources of the scientific network using abstractions that focus on their data transfer needs for scientific workflow management. Recent trends in the networking field pursue better interfaces for requesting network services (e.g., intent-based networking). Although intents are sufficient for the needs of network operations, they are not abstract enough in most cases to be used by domain-expert scientists. This is an issue we are addressing in the AtlanticWave/SDX design: network operators and domain expert scientists will have their own interfaces focusing on their specific needs.