Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher.
Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?
Some links on this page may take you to non-federal websites. Their policies may differ from this site.
-
The massive scale of plastic production and persistent plastic waste have intensified global efforts to develop sustainable bioplastics. Algal bioplastics, produced directly from whole algal biomass, are inherently biodegradable and do not rely on agricultural feedstocks, positioning them as a versatile and accessible alternative to commercially dominant bioplastics such as polylactic acid (PLA). To guide their advancement, a comprehensive evaluation of environmental impacts, material performance, and end-of-life behavior is needed. Here, we conduct a life cycle assessment to quantify cradle-to-gate environmental impacts of lab-scale algal bioplastics made from sugar kelp across eight impact categories and benchmark them against lab-scale PLA. To support transparent optimization, we perform hotspot analyses with alternative processing and energy scenarios while investigating data variability and sensitivity to quantify uncertainty in early design. Algal bioplastics exhibit on average 47% lower environmental impacts than the lab-scale PLA baseline (33–75% across eight categories), with comparable stiffness, improved flame resistance, and 94–99% biodegradability in seawater after 120 days as quantified by biochemical oxygen demand. By providing transparent data and methods and an in-depth discussion of limitations and challenges, we establish a comprehensive foundation for algal bioplastic design, supporting future innovation and scale-up of this emerging sustainable material class.more » « lessFree, publicly-accessible full text available February 2, 2027
-
Abstract Urban firestorms are a growing hazard in fire-prone regions worldwide due to increasingly dry vegetation and expanding populations at the wildland-urban interface. In January 2025, the city of Los Angeles, California (USA), experienced an unprecedented fire disaster that destroyed over 16,000 structures and caused 31 fatalities. The event was driven by a rare “jet-forced Santa Ana” wind subtype featuring an amplified upper-level ridge over the West Coast and retrograding trough over the central/eastern U.S., producing extreme northerly flow, large-scale subsidence, and mountain wave activity that impeded aerial fire suppression. While the extreme surface winds were not unprecedented, their occurrence ahead of the first winter rain was uncommon. Despite accurate multi-day forecasts, response systems were overwhelmed. Our analysis shows how upper-level atmospheric support can drive surface fire weather, compounding hazard in even well-developed areas. This underscores the importance of aligning long-range prediction with operational preparedness and communication strategies in California’s variable hydroclimate.more » « lessFree, publicly-accessible full text available December 1, 2026
-
Plastic pollution is impacting global ecosystem health. Bioplastics made from unprocessed biomass, including whole or fragmented tissues, are one potential solution. They are biodegradable and exhibit competitive mechanical performance. Seaweed and microalgae have gained popularity over the last decade as bioplastic feedstocks due to their abundance and ease of cultivation. To grasp the complexity of transforming biomatter into bioplastics and to optimise their performance, it is essential to develop processing–structure–property relationships. Transmission electron microscopy can be used to observe the morphology of bioplastics; however, current infiltration techniques are designed for biomaterials in their natural state, and harsh reagents can cause artefacts in bioplastic structure. This paper examines four different fixation methods for Spirulina bioplastics and investigates the impact of fixative, contrasting, dehydration, and resin embedding on Spirulina ultrastructure before and after bioplastic transformation. Our study suggests that the key to preserving bioplastic morphology is to prepare the specimen for electron microscopy by exposing it to gas‐phase infiltration.more » « lessFree, publicly-accessible full text available July 1, 2027
-
Unaltered biological matter (biomatter) can be harnessed to fabricate cohesive, sustainable bioplastics. However, controlling the material properties of these bioplastics is challenging, as the contributions of different macromolecular building blocks to processability and performance are unknown. To deconvolute the roles of different classes of biomolecules, we developed experimental and computational methods to construct and analyze biomatter analogs composed of carbohydrates, proteins, and lipids. These analogs are intended to improve fundamental understanding of biomatter plastics. Spectroscopic analyses of biomatter analogs suggest that cohesion depends on protein aggregation during thermomechanical processing. Molecular dynamics simulations confirm that alterations to protein conformation and hydrogen bonding are likely the primary mechanisms underlying the formation of a cohesive, proteinaceous matrix. Simulations also corroborate experimental measurements highlighting the importance of hydrogen bonding and self-assembly between specific, small-molecule constituents. These conclusions may enable the engineering of next-generation biomatter plastics with improved performance.more » « less
-
Four species of Hawaiian macroalgae are utilized to make bioplastics and algae-bound wood particleboards without chemical processing or extraction, and their species-specific chemical composition and biomaterial performance are characterized.more » « lessFree, publicly-accessible full text available May 13, 2027
-
We report a detailed study of the synthesis, composition, magnetic structure, and transport properties of a quasi-one-dimensional antiferromagnet FeBi4S7 that contains chains of edge-sharing FeS6 octahedra. High-resolution powder X-ray diffraction (PXRD) analysis, aided by variation of synthetic conditions, suggests that the true formula of the material is Fe1.2Bi3.8S7, due to the minor substitution of Fe into Bi sites. This finding is in agreement with crystal structure refinement from neutron powder diffraction data as well as with the small band gap of 0.23 eV determined from electrical transport measurements. Analysis of the neutron diffraction pattern collected below the antiferromagnetic ordering temperature of 64 K revealed ferromagnetic coupling between the Fe moments in the chains of FeS6 octahedra. The overall ordering, however, is antiferromagnetic due to the antiparallel arrangement of moments on neighboring chains. The collinear spin arrangement is described by a k-vector (1, 0, 1/2), which indicates doubling of the unit cell in the c direction and the loss of the C-centering translation as compared to the nuclear cell. The ferromagnetic nature of the sulfidebridged chains of Fe2+ ions in FeBi4S7, in contrast to the antiferromagnetic coupling between Fe moments in compounds with similar structural fragments, can be justified by the analysis of metric parameters that characterize the Fe−S bonding in these materials.more » « less
-
Abstract Vapor‐based deposition techniques are emerging approaches for the design of carbon‐supported metal powder electrocatalysts with tailored catalyst entities, sizes, and dispersions. Herein, a pulsed CVD (Pt‐pCVD) approach is employed to deposit different Pt entities on mesoporous N‐doped carbon (MPNC) nanospheres to design high‐performance hydrogen evolution reaction (HER) electrocatalysts. The influence of consecutive precursor pulse number (50‐250) and deposition temperature (225–300 °C) are investigated. The Pt‐pCVD process results in highly dispersed ultrasmall Pt clusters (≈1 nm in size) and Pt single atoms, while under certain conditions few larger Pt nanoparticles are formed. The best MPNC‐Pt‐pCVD electrocatalyst prepared in this work (250 pulses, 250 °C) reveals a Pt HER mass activity of 22.2 ± 1.2 A mg−1Ptat ‐50 mV versus the reversible hydrogen electrode (RHE), thereby outperforming a commercially available Pt/C electrocatalyst by 40% as a result of the increased Pt utilization. Remarkably, after optimization of the Pt electrode loading, an ultrahigh Pt mass activity of 56 ± 2 A mg−1Ptat ‐50 mV versus RHE is found, which is among the highest Pt mass activities of Pt single atom and cluster‐based electrocatalysts reported so far.more » « less
-
Abstract Flavodoxins (Flds) mediate the flux of electrons between oxidoreductases in diverse metabolic pathways. To investigate whether Flds can support electron transfer to a sulfite reductase (SIR) that evolved to couple with a ferredoxin, we evaluated the ability of Flds to transfer electrons from a ferredoxin‐NADP reductase (FNR) to a ferredoxin‐dependent SIR using growth complementation of anEscherichia colistrain with a sulfur metabolism defect. We show that Flds from cyanobacteria complement this growth defect when coexpressed with an FNR and an SIR that evolved to couple with a plant ferredoxin. When we evaluated the effect of peptide insertion on Fld‐mediated electron transfer, we observed a sensitivity to insertions within regions predicted to be proximal to the cofactor and partner binding sites, while a high insertion tolerance was detected within loops distal from the cofactor and within regions of helices and sheets that are proximal to those loops. Bioinformatic analysis showed that natural Fld sequence variability predicts a large fraction of the motifs that tolerate insertion of the octapeptide SGRPGSLS. These results represent the first evidence that Flds can support electron transfer to assimilatory SIRs, and they suggest that the pattern of insertion tolerance is influenced by interactions with oxidoreductase partners.more » « less
-
Parents’ questions are an effective strategy for fostering the development of young children’s science understanding and discourse. However, this work has not yet distinguished whether the frequency of questions about scientific content differs between mothers and fathers, despite some evidence from other contexts (i.e., book reading) showing that fathers ask more questions than mothers. The current study compared fathers’ and mothers’ questions to their four- to six-year-old children ( N = 49) while interacting with scientific stimuli at a museum research exhibit. Results indicated that fathers asked significantly more questions than mothers, and fathers’ questions were more strongly related to children’s scientific discourse. Results are discussed in terms of the importance of adult questions for the development of children’s scientific understanding as well as broadening research to include interlocutors other than mothers.more » « less
An official website of the United States government
