Search for: All records

Photothermal CO₂reduction is one of the most promising routes to efficiently utilize solar energy for fuel production at high rates. However, this reaction is currently limited by underdeveloped catalysts with low photothermal conversion efficiency, insufficient exposure of active sites, low active material loading, and high material cost. Herein, we report a potassium‐modified carbon‐supported cobalt (K⁺−Co−C) catalyst mimicking the structure of a lotus pod that addresses these challenges. As a result of the designed lotus‐pod structure which features an efficient photothermal C substrate with hierarchical pores, an intimate Co/C interface with covalent bonding, and exposed Co catalytic sites with optimized CO binding strength, the K⁺−Co−C catalyst shows a record‐high photothermal CO₂hydrogenation rate of 758 mmol g_cat⁻¹ h⁻¹(2871 mmol g_Co⁻¹ h⁻¹) with a 99.8 % selectivity for CO, three orders of magnitude higher than typical photochemical CO₂reduction reactions. We further demonstrate with this catalyst effective CO₂conversion under natural sunlight one hour before sunset during the winter season, putting forward an important step towards practical solar fuel production.

Many metal coordination compounds catalyze CO₂electroreduction to CO, but cobalt phthalocyanine hybridized with conductive carbon such as carbon nanotubes is currently the only one that can generate methanol. The underlying structure–reactivity correlation and reaction mechanism desperately demand elucidation. Here we report the first in situ X‐ray absorption spectroscopy characterization, combined with ex situ spectroscopic and electrocatalytic measurements, to study CoPc‐catalyzed CO₂reduction to methanol. Molecular dispersion of CoPc on CNT surfaces, as evidenced by the observed electronic interaction between the two, is crucial to fast electron transfer to the active sites and multi‐electron CO₂reduction. CO, the key intermediate in the CO₂‐to‐methanol pathway, is found to be labile on the active site, which necessitates a high local concentration in the microenvironment to compete with CO₂for active sites and promote methanol production. A comparison of the electrocatalytic performance of structurally related porphyrins indicates that the bridging aza‐N atoms of the Pc macrocycle are critical components of the CoPc active site that produces methanol. In situ X‐ray absorption spectroscopy identifies the active site as Co(I) and supports an increasingly non‐centrosymmetric Co coordination environment at negative applied potential, likely due to the formation of a Co−CO adduct during the catalysis.

Many metal coordination compounds catalyze CO₂electroreduction to CO, but cobalt phthalocyanine hybridized with conductive carbon such as carbon nanotubes is currently the only one that can generate methanol. The underlying structure–reactivity correlation and reaction mechanism desperately demand elucidation. Here we report the first in situ X‐ray absorption spectroscopy characterization, combined with ex situ spectroscopic and electrocatalytic measurements, to study CoPc‐catalyzed CO₂reduction to methanol. Molecular dispersion of CoPc on CNT surfaces, as evidenced by the observed electronic interaction between the two, is crucial to fast electron transfer to the active sites and multi‐electron CO₂reduction. CO, the key intermediate in the CO₂‐to‐methanol pathway, is found to be labile on the active site, which necessitates a high local concentration in the microenvironment to compete with CO₂for active sites and promote methanol production. A comparison of the electrocatalytic performance of structurally related porphyrins indicates that the bridging aza‐N atoms of the Pc macrocycle are critical components of the CoPc active site that produces methanol. In situ X‐ray absorption spectroscopy identifies the active site as Co(I) and supports an increasingly non‐centrosymmetric Co coordination environment at negative applied potential, likely due to the formation of a Co−CO adduct during the catalysis.

Compositional engineering has been used to overcome difficulties in fabricating high-quality phase-pure formamidinium perovskite films together with its ambient instability. However, this comes alongside an undesirable increase in bandgap that sacrifices the device photocurrent. Here we report the fabrication of phase-pure formamidinium-lead tri-iodide perovskite films with excellent optoelectronic quality and stability. Incorporation of 1.67 mol% of 2D phenylethylammonium lead iodide into the precursor solution enables the formation of phase-pure formamidinium perovskite with an order of magnitude enhanced photoluminescence lifetime. The 2D perovskite spontaneously forms at grain boundaries to protect the formamidinium perovskite from moisture and suppress ion migration. A stabilized power conversion efficiency (PCE) of 20.64% (certified stabilized PCE of 19.77%) is achieved with a short-circuit current density exceeding 24 mA cm⁻²and an open-circuit voltage of 1.130 V, corresponding to a loss-in-potential of 0.35 V, and significantly enhanced operational stability.

The electrochemical carbon dioxide reduction reaction (CO₂RR) presents a viable approach to recycle CO₂gas into low carbon fuels. Thus, the development of highly active catalysts at low overpotential is desired for this reaction. Herein, a high‐yield synthesis of unique star decahedron Cu nanoparticles (SD‐Cu NPs) electrocatalysts, displaying twin boundaries (TBs) and multiple stacking faults, which lead to low overpotentials for methane (CH₄) and high efficiency for ethylene (C₂H₄) production, is reported. Particularly, SD‐Cu NPs show an onset potential for CH₄production lower by 0.149 V than commercial Cu NPs. More impressively, SD‐Cu NPs demonstrate a faradaic efficiency of 52.43% ± 2.72% for C₂H₄production at −0.993 ± 0.0129 V. The results demonstrate that the surface stacking faults and twin defects increase CO binding energy, leading to the enhanced CO₂RR performance on SD‐Cu NPs.

Although metal halide perovskite (MHP) light‐emitting diodes (LEDs) have demonstrated great potential in terms of electroluminescence efficiency, the operational stability of MHP LEDs currently remains the biggest bottleneck toward their practical usage. Well‐confined excitons/charge carriers in a dielectric/quantum well based on conventional spatial or potential confinement approaches substantially enhance radiative recombination in MHPs, but an increased surface‐to‐volume ratio and multiphase interfaces likely result in a high degree of surface or interface defect states, which brings about a critical environmentally/operationally vulnerable point on LED stability. Here, an effective solution is suggested to mitigate such drawbacks using strategically designed surface‐2D/bulk‐3D heterophased MHP nanograins for long‐term‐stable LEDs. The 2D surface‐functionalized MHP renders significantly reduced trap density, environmental stability, and an ion‐migration‐immune surface in addition to a fast radiative recombination owing to its spatially and potentially confined charge carriers, simultaneously. As a result, heterophased MHP LEDs show substantial improvement in operational lifetime (T₅₀: >200 h) compared to conventional pure 3D or quasi‐2D counterparts (T₅₀: < 0.2 h) as well as electroluminescence efficiency (surface‐2D/bulk‐3D: ≈7.70 ph per el% and pure 3D: ≈0.46 ph per el%).