Search for: All records

There is a trade-off between the sparseness of an absorber array and its sound absorption imposed by wave physics. Here, near-perfect absorption (99% absorption) is demonstrated when the spatial period of monopole-dipole resonators is close to one working wavelength (95% of the wavelength). The condition for perfect absorption is to render degenerate monopole-dipole resonators critically coupled. Frequency domain simulations, eigenfrequency simulations, and the coupled mode theory are utilized to demonstrate the acoustic performances and the underlying physics. The sparse-resonator-based sound absorber could greatly benefit noise control with air flow and this study could also have implications for electromagnetic wave absorbers. 

Metamaterials have offered unprecedented potentials for wave manipulations. However, their applications in underwater acoustic wave control have remained largely unexplored. This is because of the limited material choices and the lack of reliable fabrication techniques for the complicated structures. Herein, a metamaterial with microlattice structures as the building blocks is proposed for underwater operations. By designing the building blocks of the metamaterial and assembling them in a layered fashion, anisotropy is embedded in the structure, which results along different effective sound speeds in orthogonal directions. The designed metamaterial is fabricated by metal additive manufacturing using aluminum and steel. Experiments are performed using a resonator tube to evaluate its performance in water. An anisotropy ratio of around 2 is achieved, which is in good agreement with numerical simulations. The proposed metamaterial provides an effective means for underwater sound control with reduced fabrication difficulties and increased service life. 

Abstract Metasurfaces open up unprecedented potential for wave engineering using subwavelength sheets. However, a severe limitation of current acoustic metasurfaces is their poor reconfigurability to achieve distinct functions on demand. Here a programmable acoustic metasurface that contains an array of tunable subwavelength unit cells to break the limitation and realize versatile two‐dimensional wave manipulation functions is reported. Each unit cell of the metasurface is composed of a straight channel and five shunted Helmholtz resonators, whose effective mass can be tuned by a robust fluidic system. The phase and amplitude of acoustic waves transmitting through each unit cell can be modulated dynamically and continuously. Based on such mechanism, the metasurface is able to achieve versatile wave manipulation functions, by engineering the phase and amplitude of transmission waves in the subwavelength scale. Through acoustic field scanning experiments, multiple wave manipulation functions, including steering acoustic waves, engineering acoustic beams, and switching on/off acoustic energy flow by using one design of metasurface are visually demonstrated. This work extends the metasurface research and holds great potential for a wide range of applications including acoustic imaging, communication, levitation, and tweezers. 

Abstract Surface acoustic waves (SAWs) that propagate on the surface of a solid at MHz frequencies are widely used in sensing, communication, and acoustic tweezers. However, their properties are difficult to be tuned electrically, and current devices suffer from complicated configurations, complicated tuning mechanisms, or small ranges of tunability. Here a structure featuring a thin‐film transistor configuration is proposed to achieve electrically tunable SAW propagation based on conductivity tuning. When a DC gate voltage is applied, the on‐site conductivity of the piezoelectric substrate is modulated, which leads to velocity and amplitude tuning of SAWs. The use of carbon nanotubes and crystalline nanocellulose as the channel and gate materials results in high tuning capacity and low gate voltage requirement. The tunability is manifested by a 2.5% phase velocity tuning and near 10 dB on/off switching of the signals. The proposed device holds the potential for the next generation SAW‐based devices.