Search for: All records

The Venusian clouds originate from the binary condensation of H2SO4 and H2O. The two components strongly interact with each other via chemistry and cloud formation. Previous works adopted sophisticated microphysical approaches to understand the clouds. Here, we show that the observed vapour and cloud distributions on Venus can be well explained by a semi-analytical model. Our model assumes local thermodynamical equilibrium for water vapour but not for sulphuric acid vapour, and includes the feedback of cloud condensation and acidity to vapour distributions. The model predicts strong supersaturation of the H2SO4 vapour above 60 km, consistent with our recent cloud condensation model. The semi-analytical model is 100 times faster than the condensation model and 1000 times faster than the microphysical models. This allows us to quickly explore a large parameter space of the sulphuric acid gas-cloud system. We found that the cloud mass loading in the upper clouds has an opposite response of that in the lower clouds to the vapour mixing ratios in the lower atmosphere. The transport of water vapour influences the cloud acidity in all cloud layers, while the transport of sulphuric acid vapour only dominates in the lower clouds. This cloud model is fast enough to be coupled with the climate models and chemistry models to understand the cloudy atmospheres of Venus and Venus-like extra-solar planets.

 

Abstract The Van Allen Probes Electric Fields and Waves (EFW) instrument provided measurements of electric fields and spacecraft floating potentials over a wide dynamic range from DC to 6.5 kHz near the equatorial plane of the inner magnetosphere between 600 km altitude and 5.8 Re geocentric distance from October 2012 to November 2019. The two identical instruments provided data to investigate the quasi-static and low frequency fields that drive large-scale convection, waves induced by interplanetary shock impacts that result in rapid relativistic particle energization, ultra-low frequency (ULF) MHD waves which can drive radial diffusion, and higher frequency wave fields and time domain structures that provide particle pitch angle scattering and energization. In addition, measurements of the spacecraft potential provided a density estimate in cold plasmas ( $<20~\text{eV}$ < 20 eV ) from 10 to $3000~\text{cm}^{-3}$ 3000 cm − 3 . The EFW instrument provided analog electric field signals to EMFISIS for wave analysis, and it received 3d analog signals from the EMFISIS search coil sensors for inclusion in high time resolution waveform data. The electric fields and potentials were measured by current-biased spherical sensors deployed at the end of four 50 m booms in the spacecraft spin plane (spin period $\sim11~\text{sec}$ ∼ 11 sec ) and a pair of stacer booms with a total tip-tip separation of 15 m along the spin axis. Survey waveform measurements at 16 and/or 32 S/sec (with a nominal uncertainty of 0.3 mV/m over the prime mission) were available continuously while burst waveform captures at up to 16,384 S/sec provided high frequency waveforms. This post-mission paper provides the reader with information useful for accessing, understanding and using EFW data. Selected science results are discussed and used to highlight instrument capabilities. Science quantities, data quality and error sources, and analysis routines are documented. 

A comprehensive study of the local and nonlocal amplitudes contributing to the decayB⁰→K^*0(→K⁺π⁻)μ⁺μ⁻is performed by analysing the phase-space distribution of the decay products. The analysis is based onppcollision data corresponding to an integrated luminosity of 8.4 fb⁻¹collected by the LHCb experiment. This measurement employs for the first time a model of both one-particle and two-particle nonlocal amplitudes, and utilises the complete dimuon mass spectrum without any veto regions around the narrow charmonium resonances. In this way it is possible to explicitly isolate the local and nonlocal contributions and capture the interference between them. The results show that interference with nonlocal contributions, although larger than predicted, only has a minor impact on the Wilson Coefficients determined from the fit to the data. For the local contributions, the Wilson Coefficient$$ {\mathcal{C}}_9 $$$C_9$, responsible for vector dimuon currents, exhibits a 2.1σdeviation from the Standard Model expectation. The Wilson Coefficients$$ {\mathcal{C}}_{10} $$$C_{10}$,$$ {\mathcal{C}}_9^{\prime } $$$C_9^{\prime }$and$$ {\mathcal{C}}_{10}^{\prime } $$$C_{10}^{\prime }$are all in better agreement than$$ {\mathcal{C}}_9 $$$C_9$with the Standard Model and the global significance is at the level of 1.5σ. The model used also accounts for nonlocal contributions fromB⁰→ K^*0[τ⁺τ⁻→ μ⁺μ⁻] rescattering, resulting in the first direct measurement of thebsττvector effective-coupling$$ {\mathcal{C}}_{9\tau } $$$C_{9\tau }$.

 

A search for hidden-charm pentaquark states decaying to a range of${\mathrm{\Sigma }}_c\overline{D}$and${\mathrm{\Lambda }}_c^{+}\overline{D}$final states, as well as doubly charmed pentaquark states to${\mathrm{\Sigma }}_{c}D$and${\mathrm{\Lambda }}_c^{+}D$, is made using samples of proton-proton collision data corresponding to an integrated luminosity of$5.7{\mathrm{fb}}^{-1}$recorded by the LHCb detector at$\sqrt{s}=13\mathrm{TeV}$. Since no significant signals are found, upper limits are set on the pentaquark yields relative to that of the${\mathrm{\Lambda }}_c^{+}$baryon in the${\mathrm{\Lambda }}_c^{+}\to p{K}^{-}{\pi }^{+}$decay mode. The known pentaquark states are also investigated, and their signal yields are found to be consistent with zero in all cases.

© 2024 CERN, for the LHCb Collaboration2024CERN 

A search for the fully reconstructed$$ {B}_s^0 $$$B_s^0$→ μ⁺μ⁻γdecay is performed at the LHCb experiment using proton-proton collisions at$$ \sqrt{s} $$$\sqrt{s}$= 13 TeV corresponding to an integrated luminosity of 5.4 fb⁻¹. No significant signal is found and upper limits on the branching fraction in intervals of the dimuon mass are set$$ {\displaystyle \begin{array}{cc}\mathcal{B}\left({B}_s^0\to {\mu}^{+}{\mu}^{-}\gamma \right)<4.2\times {10}^{-8},& m\left({\mu}^{+}{\mu}^{-}\right)\in \left[2{m}_{\mu },1.70\right]\textrm{GeV}/{c}^2,\\ {}\mathcal{B}\left({B}_s^0\to {\mu}^{+}{\mu}^{-}\gamma \right)<7.7\times {10}^{-8},&\ m\left({\mu}^{+}{\mu}^{-}\right)\in \left[\textrm{1.70,2.88}\right]\textrm{GeV}/{c}^2,\\ {}\mathcal{B}\left({B}_s^0\to {\mu}^{+}{\mu}^{-}\gamma \right)<4.2\times {10}^{-8},& m\left({\mu}^{+}{\mu}^{-}\right)\in \left[3.92,{m}_{B_s^0}\right]\textrm{GeV}/{c}^2,\end{array}} $$$\begin{array}{cc}B\left(B_s^0\to {\mu }^{+}{\mu }^{-}\gamma \right)<4.2\times {10}^{-8},& m\left({\mu }^{+}{\mu }^{-}\right)\in \left(2m_{\mu },1.70\right)\mathrm{GeV}/c^2,\\ B\left(B_s^0\to {\mu }^{+}{\mu }^{-}\gamma \right)<7.7\times {10}^{-8},& m\left({\mu }^{+}{\mu }^{-}\right)\in \left(\mathrm{1.70,\; 2.88}\right)\mathrm{GeV}/c^2,\\ B\left(B_s^0\to {\mu }^{+}{\mu }^{-}\gamma \right)<4.2\times {10}^{-8},& m\left({\mu }^{+}{\mu }^{-}\right)\in \left(3.92,m_{B_s^0}\right)\mathrm{GeV}/c^2,\end{array}$

at 95% confidence level. Additionally, upper limits are set on the branching fraction in the [2m_μ,1.70] GeV/c²dimuon mass region excluding the contribution from the intermediateϕ(1020) meson, and in the region combining all dimuon-mass intervals.

 

The superτ-charm facility (STCF) is an electron–positron collider proposed by the Chinese particle physics community. It is designed to operate in a center-of-mass energy range from 2 to 7 GeV with a peak luminosity of 0.5 × 10³⁵cm⁻²·s⁻¹or higher. The STCF will produce a data sample about a factor of 100 larger than that of the presentτ-charm factory — the BEPCII, providing a unique platform for exploring the asymmetry of matter-antimatter (charge-parity violation), in-depth studies of the internal structure of hadrons and the nature of non-perturbative strong interactions, as well as searching for exotic hadrons and physics beyond the Standard Model. The STCF project in China is under development with an extensive R&D program. This document presents the physics opportunities at the STCF, describes conceptual designs of the STCF detector system, and discusses future plans for detector R&D and physics case studies.

 

The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software. 

The production of 𝜂 and 𝜂′ mesons is studied in proton-proton and proton-lead collisions collected with the LHCb detector. Proton-proton collisions are studied at center-of-mass energies of 5.02 and 13TeV and proton-lead collisions are studied at a center-of-mass energy per nucleon of 8.16TeV. The studies are performed in center-of-mass (c.m.) rapidity regions 2.5<𝑦c.m.<3.5 (forward rapidity) and −4.0<𝑦c.m.<−3.0 (backward rapidity) defined relative to the proton beam direction. The 𝜂 and 𝜂′ production cross sections are measured differentially as a function of transverse momentum for 1.5<𝑝T<10GeV and 3<𝑝T<10GeV, respectively. The differential cross sections are used to calculate nuclear modification factors. The nuclear modification factors for 𝜂 and 𝜂′ mesons agree at both forward and backward rapidity, showing no significant evidence of mass dependence. The differential cross sections of 𝜂 mesons are also used to calculate 𝜂/𝜋0 cross-section ratios, which show evidence of a deviation from the world average. These studies offer new constraints on mass-dependent nuclear effects in heavy-ion collisions, as well as 𝜂 and 𝜂′ meson fragmentation.