Search for: All records

We present the results of millimetre-wave spectroscopic observations and spectral surveys of the following short-period comets: 21P/Giacobini-Zinner in September 2018, 41P/Tuttle-Giacobini-Kresák in April 2017, and 64P/Swift-Gehrels and 38P/Stephan-Oterma in December 2018, carried out with the Institut de RadioAstronomie Millimétrique (IRAM) 30-m radio telescope at wavelengths between 1 and 3 mm. Comet 21P was also observed in November 1998 with the IRAM 30-m, James Clerk Maxwell Telescope, and the Caltech submillimeter Observatory radio telescopes at wavelengths from 0.8 to 3 mm. The abundances of the following molecules have been determined in those comets: HCN, CH 3 OH, CS, H 2 CO, CH 3 CN, and H 2 S in comet 21P; HCN and CH 3 OH in 41P; HCN, CH 3 OH, and CS in 64P; and CH 3 OH in 38P. The last three comets, classified as carbon-chain typical from visible spectro-photometry, are relatively rich in methanol (3.5–5% relative to water). On the other hand, comet 21P, classified as carbon-chain depleted, shows abundances relative to water which are low for methanol (1.7%), very low for H 2 S (0.1%), and also relatively low for H 2 CO (0.16%) and CO (<2.5%). Observations of comet 21P do not show any change in activity and composition between the 1998 and 2018 perihelions. Sensitive upper limits on the abundances of other molecules such as CO, HNCO, HNC, or SO are also reported for these comets. 

Inertial confinement fusion approaches involve the creation of high-energy-density states through compression. High gain scenarios may be enabled by the beneficial heating from fast electrons produced with an intense laser and by energy containment with a high-strength magnetic field. Here, we report experimental measurements from a configuration integrating a magnetized, imploded cylindrical plasma and intense laser-driven electrons as well as multi-stage simulations that show fast electrons transport pathways at different times during the implosion and quantify their energy deposition contribution. The experiment consisted of a CH foam cylinder, inside an external coaxial magnetic field of 5 T, that was imploded using 36 OMEGA laser beams. Two-dimensional (2D) hydrodynamic modelling predicts the CH density reaches 9.0   g cm − 3 , the temperature reaches 920 eV and the external B-field is amplified at maximum compression to 580 T. At pre-determined times during the compression, the intense OMEGA EP laser irradiated one end of the cylinder to accelerate relativistic electrons into the dense imploded plasma providing additional heating. The relativistic electron beam generation was simulated using a 2D particle-in-cell (PIC) code. Finally, three-dimensional hybrid-PIC simulations calculated the electron propagation and energy deposition inside the target and revealed the roles the compressed and self-generated B-fields play in transport. During a time window before the maximum compression time, the self-generated B-field on the compression front confines the injected electrons inside the target, increasing the temperature through Joule heating. For a stronger B-field seed of 20 T, the electrons are predicted to be guided into the compressed target and provide additional collisional heating. This article is part of a discussion meeting issue ‘Prospects for high gain inertial fusion energy (part 2)’. 

Computing demands for large scientific experiments, such as the CMS experiment at the CERN LHC, will increase dramatically in the next decades. To complement the future performance increases of software running on central processing units (CPUs), explorations of coprocessor usage in data processing hold great potential and interest. Coprocessors are a class of computer processors that supplement CPUs, often improving the execution of certain functions due to architectural design choices. We explore the approach of Services for Optimized Network Inference on Coprocessors (SONIC) and study the deployment of this as-a-service approach in large-scale data processing. In the studies, we take a data processing workflow of the CMS experiment and run the main workflow on CPUs, while offloading several machine learning (ML) inference tasks onto either remote or local coprocessors, specifically graphics processing units (GPUs). With experiments performed at Google Cloud, the Purdue Tier-2 computing center, and combinations of the two, we demonstrate the acceleration of these ML algorithms individually on coprocessors and the corresponding throughput improvement for the entire workflow. This approach can be easily generalized to different types of coprocessors and deployed on local CPUs without decreasing the throughput performance. We emphasize that the SONIC approach enables high coprocessor usage and enables the portability to run workflows on different types of coprocessors.

 

A measurement is performed of Higgs bosons produced with high transverse momentum (p_T) via vector boson or gluon fusion in proton-proton collisions. The result is based on a data set with a center-of-mass energy of 13 TeV collected in 2016–2018 with the CMS detector at the LHC and corresponds to an integrated luminosity of 138 fb⁻¹. The decay of a high-p_THiggs boson to a boosted bottom quark-antiquark pair is selected using large-radius jets and employing jet substructure and heavy-flavor taggers based on machine learning techniques. Independent regions targeting the vector boson and gluon fusion mechanisms are defined based on the topology of two quark-initiated jets with large pseudorapidity separation. The signal strengths for both processes are extracted simultaneously by performing a maximum likelihood fit to data in the large-radius jet mass distribution. The observed signal strengths relative to the standard model expectation are$$ {4.9}_{-1.6}^{+1.9} $$${4.9}_{-1.6}^{+1.9}$and$$ {1.6}_{-1.5}^{+1.7} $$${1.6}_{-1.5}^{+1.7}$for the vector boson and gluon fusion mechanisms, respectively. A differential cross section measurement is also reported in the simplified template cross section framework.

 

This paper describes theCombinesoftware package used for statistical analyses by the CMS Collaboration. The package, originally designed to perform searches for a Higgs boson and the combined analysis of those searches, has evolved to become the statistical analysis tool presently used in the majority of measurements and searches performed by the CMS Collaboration. It is not specific to the CMS experiment, and this paper is intended to serve as a reference for users outside of the CMS Collaboration, providing an outline of the most salient features and capabilities. Readers are provided with the possibility to runCombineand reproduce examples provided in this paper using a publicly available container image. Since the package is constantly evolving to meet the demands of ever-increasing data sets and analysis sophistication, this paper cannot cover all details ofCombine. However, the online documentation referenced within this paper provides an up-to-date and complete user guide.

 

A search is reported for charge-parity$$CP$$$\mathrm{CP}$violation in$${{{\textrm{D}}}^{{0}}} \rightarrow {{\textrm{K}} _{\text {S}}^{{0}}} {{\textrm{K}} _{\text {S}}^{{0}}} $$${\text{D}}^0\to {\text{K}}_{\text{S}}^0{\text{K}}_{\text{S}}^0$decays, using data collected in proton–proton collisions at$$\sqrt{s} = 13\,\text {Te}\hspace{-.08em}\text {V} $$$\sqrt{s}=13\text{Te}\text{V}$recorded by the CMS experiment in 2018. The analysis uses a dedicated data set that corresponds to an integrated luminosity of 41.6$$\,\text {fb}^{-1}$$${\text{fb}}^{-1}$, which consists of about 10 billion events containing a pair of b hadrons, nearly all of which decay to charm hadrons. The flavor of the neutral D meson is determined by the pion charge in the reconstructed decays$${{{\textrm{D}}}^{{*+}}} \rightarrow {{{\textrm{D}}}^{{0}}} {{{\mathrm{\uppi }}}^{{+}}} $$$\text{D}_{}^{\ast +}\to {\text{D}}^0{\pi }^{+}$and$${{{\textrm{D}}}^{{*-}}} \rightarrow {\overline{{\textrm{D}}}^{{0}}} {{{\mathrm{\uppi }}}^{{-}}} $$$\text{D}_{}^{\ast -}\to {\overline{\text{D}}}^0{\pi }^{-}$. The$$CP$$$\mathrm{CP}$asymmetry in$${{{\textrm{D}}}^{{0}}} \rightarrow {{\textrm{K}} _{\text {S}}^{{0}}} {{\textrm{K}} _{\text {S}}^{{0}}} $$${\text{D}}^0\to {\text{K}}_{\text{S}}^0{\text{K}}_{\text{S}}^0$is measured to be$$A_{CP} ({{\textrm{K}} _{\text {S}}^{{0}}} {{\textrm{K}} _{\text {S}}^{{0}}} ) = (6.2 \pm 3.0 \pm 0.2 \pm 0.8)\%$$$A_{\mathrm{CP}}\left({\text{K}}_{\text{S}}^0{\text{K}}_{\text{S}}^0\right)=(6.2\pm 3.0\pm 0.2\pm 0.8)\%$, where the three uncertainties represent the statistical uncertainty, the systematic uncertainty, and the uncertainty in the measurement of the$$CP$$$\mathrm{CP}$asymmetry in the$${{{\textrm{D}}}^{{0}}} \rightarrow {{\textrm{K}} _{\text {S}}^{{0}}} {{{\mathrm{\uppi }}}^{{+}}} {{{\mathrm{\uppi }}}^{{-}}} $$${\text{D}}^0\to {\text{K}}_{\text{S}}^0{\pi }^{+}{\pi }^{-}$decay. This is the first$$CP$$$\mathrm{CP}$asymmetry measurement by CMS in the charm sector as well as the first to utilize a fully hadronic final state.