Search for: All records

The synthesis of the bidentate Mo complex tetrachlorido[6-(3’-butylimidazolium-1’-yl)-2-(3’’-butylimidazol-1’’-yl-2’’-idene-κC2)phenyl-κC1]molybdenum(IV) 3 was carried out using the metalation followed by transmetalation methodology. The transmetallation process led to a bidentate complex after reaction of DCM with HNMe2 formed an acidic ammonium ion that protonated the bidentate complex. Optimization of the synthetic methodology provided the tetrachlorido[6-(3’-butylimidazolium-1’-yl)-2-(3’’-butylimidazol-1’’-yl-2’’-idene-κC2)phenyl-κC1]molybdenum(IV) complex in high yield. The crystal structure of the bidentate complex, 3, is reported herein. Attempts to avoid the acidic reaction conditions with different solvents or starting materials produced the bis-ligated Mo complex bis[2,6-bis(3’-butylimidazol-1’-yl-2’-idene-κC2)phenyl-κC1]molybdenum(IV) dichloride based on MS analysis. Electronic and coordinative unsaturation in the resulting bidentate complex, 3, open new possibilities for coordination of incoming substrates while also allowing access to the pincer-like motif via oxidative addition. Access to the interconversion of a NHC to/from imidazolium opens new avenues of non-innocent ligand pathways for proton shuttling in reactions such as nitrogen reduction to ammonia. 

In contrast to the reported CCC-NHC pincer ligands that contain normal N-heterocyclic carbenes (NHC), herein we report an imidazole-based abnormal NHC (aNHC) pincer ligand, CCC-aNHC. The CCC-aNHC pincer Pt complex with two aNHC donors was synthesized via the in situ metalation and transmetalation methodology. The 1,3-phenylene(bis-2-phenyl-3-butyl imidazolium) diiodide salt was reacted with Zr(NMe2)4 to generate a CCC-aNHC pincer zirconium complex in situ. It was transmetalated to Pt using [Pt(COD)Cl2]. Electrospray ionization of the Pt pincer complex [(BuCa‑iCa‑iCBu)-PtI] in acetonitrile generated an intense peak at m/z = 696.2375, which was assigned to the dinitrogen adduct [M−I+N2]+ of the cationic CCC-aNHC pincer Pt(II) complex [(BuCa‑iCa‑iCBu)Pt− N2]+, representing a rare example of the platinum dinitrogen organometallic complex. The super electron-donating ability of the pincer ligands with abnormal NHC enabled the cationic CCC-aNHC pincer Pt(II) complex to selectively bind N2 over MeCN in a first-order analysis. A collision-induced dissociation (CID) study was conducted on the N2 and MeCN adducts, suggesting that more energy was required to dissociate N2 than MeCN. A computational study suggested that the N2 adduct was kinetically stable in the gas phase whereas the MeCN adduct was thermodynamically preferred. The computational results reconciled the mass spectral data experiment with an attempt to isolate the N2 adduct. DFT computation suggested that N2 dissociation is more challenging due to higher energy transition states, and there is a competitive pathway of N2 tumbling within the coordination sphere of the Pt. This tumbling path is not available from the MeCN ligand due to ligand structural differences. 

The reaction of RuHCl(PPh3)3 with GaMe3 gives rise to the arene complex [(η6-C6H6)Ru(PPh3)(PPh2-o-C6H4-GaClMe], 1, with the Ga atom making part of an in situ generated ambiphilic phosphinogallyl ligand in a five-membered ruthenagallacycle ring with a tetracoordinate gallium. In the presence of excess GaMe3, 1 forms complex [(η6-C6H6)Ru(PPh3)(PPh2-o-C6H4-GaMe][GaMe3Cl], 2 also bearing a phosphinogallyl ligand. Crystals suitable for single-crystal X-ray diffraction were obtained of complex 2′, [(η6-C6H6)Ru(PPh3)(PPh2-o-C6H4-GaMe][GaMe2Cl2], showing an ion pair with two Ga atoms in different coordination environments: the first with a coordination number of three makes part of a five-membered ruthenagallacyle ring, while the second Ga atom is a gallate anion. In both complexes 1 and 2, the Ga atom binds to Ru as a σ-acceptor Z-type ligand. DFT calculations are in good agreement with the experimental single crystal X-ray diffraction data and provide Ru-Ga Wiberg bond indexes of 0.38 and 0.50, for 1 and 2 respectively. In contrast, treatment of RuHCl(PPh3)3 with GaMeCl2 and of RuCl2(PPh3)3 with GaMe3 gives rise to gallate species [(η6-C6H6)Ru(PPh3)2H][GaMeCl3], 3, and [(η6-C6H6)Ru(PPh3)2Me][GaMe2Cl2], 4, respectively. 

The formation of dimer [(μ-Cl)Rh-(κ3(P,Si,Si)PhP(o-C6H4CH2SiiPr2)(o-C6H4CH2SiiPrnPr))]2 (Rh-3) with an n-propyl group on one of the silicon atoms as a minor product was affected by the reaction of [RhCl(COD)]2 with proligand PhP(o-C6H4CH2SiHiPr2)2, L1. The major product of the reaction was monomeric 14-electron Rh(III) complex [ClRh(κ3(P,Si,Si)PhP(o-C6H4CH2SiiPr2)2)] (Rh-1). Computations revealed that the monomer–dimer equilibrium is shifted toward the monomer with four isopropyl substituents on the two Si atoms of the ligand as in Rh-1; conversely, the dimer is favored with only one n-propyl as in Rh-3, and with less bulky alkyl substituents such as in [ClRh(κ3(P,Si,Si)PhP(o-C6H4CH2SiMe2)2]2 (Rh-2). Computations on the mechanism of formation of Rh-3 directly from [RhCl(COD)]2 are in agreement with the experimental findings and it is found to be less energetic than if stemming from Rh-1. Additionally, a Si–O–Si complex, [μ-Cl-Rh{κ3(P,Si,C)PPh(o-C6H4CH2SiiPrO SiiPr2CH-o-C6H4)}]2, Rh-4, is generated from the reaction of Rh-1 with adventitious water as a result of intramolecular C–H activation. 

Monoligated and bis-ligated CCC-NHC pincer Fe complexes with n-butyl substituents have been synthesized by the Zr metalation/transmetalation route. Both the direct metalation/transmetalation and transmetalation from the isolated (BuCiCiCBu)ZrNMe2Cl2, 3, yielded the octahedrally coordinated Fe(III) bis-ligated complex [(BuCiCiCBu)2Fe]Cl, 2a. Transmetalation from in situ and isolated (BuCiCiCBu)ZrCl3, 5, in the presence of excess TMSCl and 1 equiv of the Fe source yielded the monoligated (BuCiCiCBu)FeCl2, 4. Conditions that convert [(BuCiCiCBu)2Fe]+, 2, to (BuCiCiCBu)FeCl2, 4, complex have been found. Characterization included 1H NMR, UV−visible, femtosecond transient absorption spectroscopies, TDDFT computations, and mass spectroscopy along with X-ray crystallographic structure determinations. 

Catalyst-mediated hydrogenation of ketones via hydride transfer can be directly used in the synthesis of alcohols which can exhibit great potential in the practical synthesis of pharmaceuticals. The application of Ni-NHC complexes in the hydrogenation of ketones is still limited. In a pursuit to study the effect of Ni-NHC-based complexes in the reactivity towards hydrogenation, we have studied the catalytic efficiency of a pendent-type nickel complex [Ni(NHC)2](PF6)2 constructed from a benzimidazole moiety. The hydrogenation of 2-acetylpyridine was studied with respect to catalyst loading, reaction temperature, reaction time, and solvent medium. The complex was broadly characterized by X-ray crystallography, ESI-MS, NMR, UV-Vis, and IR spectral studies. 

The metalation/transmetalation strategy using [Zr(NMe2)4] as initial metalating reagent offers an efficient approach to the synthesis of CCC–NHC pincer complexes. Many CCC–NHC pincer complexes have been prepared via this methodology. As efficient as this methodology is, many questions remained as to the mechanism for the process, particularly the requirement of two equivalents of Rh per proligand for good yields. Previously, no intermediates have been reported to shed light on the mechanism. In the process of investigating an intermediate and the mechanism of the metalation/transmetalation methodology, a new mixed valent bimetallic CCC–NHC pincer Rh complex with two chloro ligands bridged between a [(CCC–NHC)Rh(III)] and a [Rh(I)(COD)] fragment was isolated and fully characterized. The investigation of the Rh(III)/Rh(I) bimetallic intermediate in the CCC–NHC pincer metalation/transmetalation methodology led to an improved stoichiometric synthesis of CCC–NHC pincer Rh complexes. It was found that switching the proligand from iodide to chloride counterion obviated the need for an extra equivalent of Rh. The iodide bridged Rh(III)/Rh(I) intermediate was much more stable and prevented further reaction in comparison to the chloride congener. When it was switched to only chloride present the reaction quickly gave efficient, complete transmetalation with only a 1:1 ratio of proligand:Rh.