Search for: All records

Microelectromechanical Systems (MEMS) energy harvesters have been extensively investigated over the past decade, but increasing power density and long-term reliability under high acceleration and low frequency are still major concerns. This study focused on the development of a low-frequency lead zirconate titanate (PZT) based energy harvester capable of operating at high acceleration >4 g with high power density performance. This study investigates the performance effects of altering the electrode configuration and poling configuration to maximize power density. The study investigated using four different types of electrode configuration consisting of long and short interdigitated electrodes (IDE) to operate in d 33 mode, and traditional parallel plate configuration to operate in d 31 mode. The results were numerically and experimentally validated. The results illustrate that the d 33 mode configuration was able to generate >3200 μW mm -3 with good reliability of up to 4 g. 

We report a new measurement of flux-integrated differential cross sections for charged-current (CC) muon neutrino interactions with argon nuclei that produce no final-state pions ( ${\nu }_{\mu }\mathrm{CC}0\pi$). These interactions are of particular importance as a topologically defined signal dominated by quasielasticlike interactions. This measurement was performed with the MicroBooNE liquid argon time projection chamber detector located at the Fermilab Booster Neutrino Beam and uses an exposure of $1.3\times {10}^{21}$protons on target collected between 2015 and 2020. The results are presented in terms of single- and double-differential cross sections as a function of the final-state muon momentum and angle. The data are compared with widely used neutrino event generators. We find good agreement with the single-differential measurements, while only a subset of generators are also able to adequately describe the data in double-differential distributions. This work facilitates comparison with Cherenkov detector measurements, including those located at the Booster Neutrino Beam. 

Abstract Most ionospheric models cannot sufficiently reproduce the observed electron density profiles in the E‐region ionosphere, since they usually underestimate electron densities and do not match the profile shape. Mitigation of these issues is often addressed by increasing the solar soft X‐ray flux which is ineffective for resolving data‐model discrepancies. We show that low‐resolution cross sections and solar spectral irradiances fail to preserve structure within the data, which considerably impacts radiative processes in the E‐region, and are largely responsible for the discrepancies between observations and simulations. To resolve data‐model inconsistencies, we utilize new high‐resolution (0.001 nm) atomic oxygen (O) and molecular nitrogen (N₂) cross sections and solar spectral irradiances, which contain autoionization and narrow rotational lines that allow solar photons to reach lower altitudes and increase the photoelectron flux. This work improves upon Meier et al. (2007,https://doi.org/10.1029/2006gl028484) by additionally incorporating high‐resolution N₂photoionization and photoabsorption cross sections in model calculations. Model results with the new inputs show increased O⁺production rates of over 500%, larger than those of Meier et al. (2007,https://doi.org/10.1029/2006gl028484) and total ion production rates of over 125%, while production rates decrease by ∼15% in the E‐region in comparison to the results obtained using the cross section compilation from Conway (1988,https://apps.dtic.mil/sti/pdfs/ADA193866.pdf). Low‐resolution molecular oxygen (O₂) cross sections from the Conway compilation are utilized for all input cases and indicate that is a dominant contributor to the total ion production rate in the E‐region. Specifically, the photoionization contributed from longer wavelengths is a main contributor at ∼120 km. 

Abstract The Michelson Interferometer for Global High-resolution Thermospheric Imaging (MIGHTI) was launched aboard NASA’s Ionospheric Connection (ICON) Explorer satellite in October 2019 to measure winds and temperatures on the limb in the upper mesosphere and lower thermosphere (MLT). Temperatures are observed using the molecular oxygen atmospheric band near 763 nm from 90–127 km altitude in the daytime and 90–108 km in the nighttime. Here we describe the measurement approach and methodology of the temperature retrieval, including unique on-orbit operations that allow for a better understanding of the instrument response. The MIGHTI measurement approach for temperatures is distinguished by concurrent observations from two different sensors, allowing for two self-consistent temperature products. We compare the MIGHTI temperatures against existing MLT space-borne and ground-based observations. The MIGHTI temperatures are within 7 K of these observations on average from 90–95 km throughout the day and night. In the daytime on average from 99–105 km, MIGHTI temperatures are higher than coincident observations by the Sounding of the Atmosphere using Broadband Emission Radiometry (SABER) instrument on NASA’s TIMED satellite by 18 K. Because the difference between the MIGHTI and SABER observations is predominantly a constant bias at a given altitude, conclusions of scientific analyses that are based on temperature variations are largely unaffected. 

This Letter presents an investigation of low-energy electron-neutrino interactions in the Fermilab Booster Neutrino Beam by the MicroBooNE experiment, motivated by the excess of electron-neutrino-like events observed by the MiniBooNE experiment. This is the first measurement to use data from all five years of operation of the MicroBooNE experiment, corresponding to an exposure of $1.11\times {10}^{21}$protons on target, a 70% increase on past results. Two samples of electron neutrino interactions without visible pions are used, one with visible protons and one without any visible protons. The MicroBooNE data show reasonable agreement with the nominal prediction, with $p$values $\ge 26.7\%$when the two ${\nu }_e$samples are combined, though the prediction exceeds the data in limited regions of phase space. The data are further compared to two empirical models that modify the predicted rate of electron-neutrino interactions in different variables in the simulation to match the unfolded MiniBooNE low energy excess. In the first model, this unfolding is performed as a function of electron neutrino energy, while the second model aims to match the observed shower energy and angle distributions of the MiniBooNE excess. This measurement excludes an electronlike interpretation of the MiniBooNE excess based on these models at $>99\%{\mathrm{CL}}_{\mathrm{s}}$in all kinematic variables. 

Understanding electron neutrino interactions is crucial for measurements of neutrino oscillations and searches for new physics in neutrino experiments. We present the first measurement of the flux-averaged ${\nu }_e+{\overline{\nu }}_e$charged-current single charged-pion production cross section on argon using the MicroBooNE detector and data from the NuMI neutrino beam. The total cross section is measured to be $[0.93\pm 0.13(\mathrm{stat})\pm 0.27(\mathrm{syst}\left)\right]\times {10}^{-39}{\mathrm{cm}}^2/\mathrm{nucleon}$at a mean ${\nu }_e+{\overline{\nu }}_e$energy of 730 MeV. Differential cross sections are also reported in electron energy, electron and pion angles, and electron-pion opening angle. 

Abstract We have observed electron impact fluorescence from CO₂to excite the Cameron bands (CBs), CO (a³Π →X¹Σ⁺; 180–280 nm), the first-negative group (1NG) bands, CO⁺(B²Σ⁺→X²Σ⁺; 180–320 nm), the fourth-positive group (4PG) bands, CO (A¹Π →X¹Σ⁺; 111–280 nm), and the UV doublet, CO₂⁺( $\tilde{B}{}^2{\mathrm{\Sigma }}_u^{+}\to \tilde{X}{}^2{\mathrm{\Pi }}_g;$288.3 and 289.6 nm) in the ultraviolet (UV). This wavelength range matches the spectral region of past and present spacecraft equipped to observe UV dayglow and aurora emissions from the thermospheres (100–300 km) of Mars and Venus. Our large vacuum system apparatus is able to measure the emission cross sections of the strongest optically forbidden UV transitions found in planetary spectra. Based on our cross-sectional measurements, previous CB emission cross-sectional errors exceed a factor of 3. The UV doublet lifetime is perturbed through $\tilde{B}{}^2{\mathrm{\Sigma }}_u^{+}-\tilde{A}{}^2{\mathrm{\Pi }}_u$spin–orbit coupling. Forward modeling codes of the Mars dayglow have not been accurate in the mid-UV due to systematic errors in these two emission cross sections. We furnish absolute emission cross sections for several band systems over electron energies 20–100 eV for CO₂. We present a CB lifetime, which together with emission cross sections, furnish a set of fundamental physical constants for electron transport codes such as AURIC (Atmospheric Ultraviolet Radiance Integrated Code). AURIC and Trans-Mars are used in the analysis of UV spectra from the Martian dayglow and aurora. 

We investigate the expected precision of the reconstructed neutrino direction using a ${\nu }_{\mu }$-argon quasielasticlike event topology with one muon and one proton in the final state and the reconstruction capabilities of the MicroBooNE liquid argon time projection chamber. This direction is of importance in the context of DUNE sub-GeV atmospheric oscillation studies. MicroBooNE allows for a data-driven quantification of this resolution by investigating the deviation of the reconstructed muon-proton system orientation with respect to the well-known direction of neutrinos originating from the Booster Neutrino Beam with an exposure of $1.3\times {10}^{21}$protons on target. Using simulation studies, we derive the expected sub-GeV DUNE atmospheric-neutrino reconstructed simulated spectrum by developing a reweighting scheme as a function of the true neutrino energy. We further report flux-integrated single- and double-differential cross section measurements of charged-current ${\nu }_{\mu }$quasielasticlike scattering on argon as a function of the muon-proton system angle using the full MicroBooNE data sets. We also demonstrate the sensitivity of these results to nuclear effects and final state hadronic reinteraction modeling. 

Abstract Global pollinator declines threaten food production and natural ecosystems. The drivers of declines are complicated and driven by numerous factors such as pesticide use, loss of habitat, rising pathogens due to commercial bee keeping and climate change. Halting and reversing pollinator declines will require a multidisciplinary approach and international cooperation. Here, we summarize 20 presentations given in the symposium ‘Protecting pollinators and our food supply: Understanding and managing threats to pollinator health’ at the 19th Congress of the International Union for the Study of Social Insects in San Diego, 2022. We then synthesize the key findings and discuss future research areas such as better understanding the impact of anthropogenic stressors on wild bees. 

Neutrino-nucleus cross section measurements are needed to improve interaction modeling to meet the precision needs of neutrino experiments in efforts to measure oscillation parameters and search for physics beyond the Standard Model. We review the difficulties associated with modeling neutrino-nucleus interactions that lead to a dependence on event generators in oscillation analyses and cross section measurements alike. We then describe data-driven model validation techniques intended to address this model dependence. The method relies on utilizing various goodness-of-fit tests and the correlations between different observables and channels to probe the model for defects in the phase space relevant for the desired analysis. These techniques shed light on relevant mismodeling, allowing it to be detected before it begins to bias the cross section results. We compare more commonly used model validation methods which directly validate the model against alternative ones to these data-driven techniques and show their efficacy with fake data studies. These studies demonstrate that employing data-driven model validation in cross section measurements represents a reliable strategy to produce robust results that will stimulate the desired improvements to interaction modeling. Published by the American Physical Society2025