Note: When clicking on a Digital Object Identifier (DOI) number, you will be taken to an external site maintained by the publisher.
Some full text articles may not yet be available without a charge during the embargo (administrative interval).
What is a DOI Number?
Some links on this page may take you to non-federal websites. Their policies may differ from this site.
-
Large Eddy Simulations of flow over monochromatic waves reveal two robust signatures in the spatio-temporal spectra: (i) a reduction in the scale-dependent convective velocity, manifested as changes in spectral tilt, which are most pronounced for slow waves, and (ii) discrete energy peaks at the wavenumber of the wave with harmonics that decay approximately exponentially with height. The fundamental wave-induced peak persists up to heights on the order of the peak wavelength. These observations are used to inform the extension of a spatio-temporal spectral modeling framework developed for canonical wall-turbulence to represent turbulence over ocean waves. The model consists of a linear random–advection framework for wall-turbulence augmented by a wave component constrained by the wave phase speed, wavenumber harmonics, and their vertical decay. The resulting model is fully parameterized by canonical wall turbulence inputs and basic wave parameters, i.e., requires no numerical simulation calibration. Comparisons against simulations show that the model reproduces the spectral tilt, Doppler broadening, and the amplitude and frequency shift of the fundamental wave-induced peak observed in LES data. These results suggest that the model provides a compact, physics-inspired description of wind–wave turbulence with direct relevance to weather forecasting and offshore engineering design.more » « lessFree, publicly-accessible full text available May 1, 2027
-
Electric power systems are rapidly evolving into deeply digital, cyber-physical infrastructures in which large fleets of distributed energy resources must be coordinated as system-level flexibility across multiple spatial and temporal scales. Despite growing distributed energy resource deployment, existing grid and market architectures lack scalable, interoperable mechanisms to reliably translate device-level flexibility into grid-aware services, creating risks to reliability, affordability, and resilience at high penetration. We propose that scalable and reliable coordination of distributed energy resource-based flexibility in future power systems is fundamentally an architectural problem that can be addressed through laminar cyber-physical design using minimal, standardized interoperability interfaces that link device autonomy with system-level objectives. To assess this claim, we present and discuss a layered cyber-physical systems architecture and explicate its implementation through standards-based interfaces, Flexibility Functions, hierarchical control, and case studies spanning U.S. and Danish regulatory, market, and operational contexts. Empirical evidence from New York’s Grid of the Future proceedings, Danish Smart Energy Operating System pilots, and operational aggregator deployments demonstrates that such architecture enables predictable, grid-aware flexibility while preserving device autonomy, interoperability, reliability, and quality of service. These results support a cross-Atlantic research agenda centered on joint testbeds, harmonized interoperability mechanisms, and coordinated policy experiments to accelerate the deployment of resilient, scalable, and flexible clean energy systems.more » « lessFree, publicly-accessible full text available May 1, 2027
-
Abstract A new model to evaluate the equivalent hydrodynamic length or surface roughness,z0, of ocean waves is developed and tested. The proposed Surface Wave-Aerodynamic Roughness Length (SWARL) model requires maps of the wave surface height at consecutive times and the airflow characteristic Reynolds number as inputs. Pressure drag is accounted for by approximating the relative velocity in a frame moving with the local wave phase speed assuming ideal inviscid ramp flow. Drag from viscous and unresolved ripples is modeled using the standard equilibrium model. The SWARL model is tested using over 300 datasets for monochromatic and broad-spectrum wave surfaces. The model-predictedz0and drag coefficients are compared to measured values, as well as commonly used wave parameterization methods found in the literature. For datasets with well-characterized surfaces, the proposed model shows significantly better agreement with data compared to prior models. For data that did not include a full characterization of the wave fields (typically field data), the model yields predictions with accuracy similar to prior models. Results highlight that including detailed flow physics and extensive wavefield characterization in the modeling ofz0can provide significant improvements in roughness-length-based modeling of air–sea interactions. Significance StatementThis paper introduces a new method to predict the surface drag force of wind over ocean waves, a key parameter for weather forecasting, climate modeling, and offshore engineering. Drag is typically quantified by a roughness length (a measure of the resistance to the wind at the wind-wave interface due to moving surface waves), which conventional methods estimate using empirical formulas or assumptions that fail to capture the dynamics accurately. Our model predicts the roughness length based on geometric knowledge about the moving surface. It performs well on both simple and complex wave shapes, showing significantly better agreement with data than traditional approaches. By improving drag predictions, this method can enhance simulations of hurricane evolution, climate modeling, and offshore wind farm design.more » « lessFree, publicly-accessible full text available March 1, 2027
-
Analytical wake models provide a computationally efficient means to predict velocity distributions in wind turbine wakes in the atmospheric boundary layer (ABL). Most existing models are developed for neutral atmospheric conditions and correspondingly neglect the effects of buoyancy and Coriolis forces that lead to veer, i.e., changes in the wind direction with height. Both veer and changes in thermal stratification lead to lateral shearing of the wake behind a wind turbine, which affects the power output of downstream turbines. Here we develop an analytical engineering wake model for a wind turbine in yaw in ABL flows including Coriolis and thermal stratification effects. The model combines the new analytical representation of ABL vertical structure based on coupling Ekman and surface layer descriptions developed in Narasimhan et al. [Boundary Layer Meteorol. 190, 16 (2024)] with the vortex sheet-based wake model for yawed turbines proposed in Bastankhah et al. [J. Fluid Mech. 933, A2 (2022)], as well as a new method to predict the wake expansion rate based on the Townsend-Perry logarithmic scaling of streamwise velocity variance. The proposed wake model's predictions show good agreement with large-eddy simulation results, capturing the effects of wind veer and yawing, including the curled and sheared wake structures across various states of the ABL, ranging from neutrally to strongly stably stratified atmospheric conditions. The model significantly improves power loss predictions from wake interactions, especially in strongly stably stratified conditions where wind veer effects dominate.more » « less
-
The atmospheric boundary layer undergoes significant changes throughout a diurnal cycle, affecting wind turbine performance and wakes in wind farms. Wind farm large-eddy simulations (LES) under such conditions provide rich datasets to study the underlying dynamics and identify important trends. Here, we describe a comprehensive open dataset generated using LES of an eight-turbine wind farm consisting of four rows of two turbines. To avoid specifying either prescribed surface temperature or heat flux, a local one-dimensional soil heat conduction model is used with time-periodic solar surface heating, coupled to LES. After several days of low-resolution LES, an approximately time-periodic behavior is achieved, after which high-resolution LES is continued during a 24-h period. Analysis of the LES data reveals that wind turbine wakes have a significant impact on the temperature field and spatial surface heat flux patterns, exhibiting increased surface temperature behind the wind farm at night under the specific conditions of the simulation (dry unvegetated soil, clear sky). We observe that for a few morning hours the first row of wind turbines generates less power compared to the last row. Detailed analyses of the data using innovative web services facilitated data access tools reveal that during the morning transition, the presence of a low-level jet and the wind farm blockage effect combine to cause cooling and a reduction in wind speed at hub-height upstream of the wind farm. In addition, larger turbulence levels exist downstream in the wind farm, explaining the larger power production of downstream turbines.more » « less
-
Abstract Reliable characterization of wind turbine wakes in the presence of Atmospheric Boundary Layer (ABL) flows is crucial to accurately predict wind farm performance. Wind veering in the ABL shears the wake in the lateral direction, and wind veer strength depends on the thermal stability of the ABL. Analytical wake modeling approaches must capture these ABL effects to ensure correct prediction of the wake structure under varied atmospheric conditions. To this end, a new physics-based analytical wake model is developed in this study that is capable of predicting the shape of wakes influenced by wind veer and thermal stratification effects. This model combines a novel ABL wind field model with the Gaussian wake model. The new ABL wind model is capable of predicting both the streamwise and spanwise velocity components in conventionally neutral (CNBL) and stable (SBL) ABL flows. The analytical expressions for both of these horizontal velocity components adhere to Monin-Obukhov Similarity Theory (MOST) in the surface layer, while capturing wind veering in the outer layer of the ABL. Incorporating this ABL model with the Gaussian wake model predicts laterally deflected wake shapes in a fully predictive and self-consistent fashion for a wide range of atmospheric conditions. The results also demonstrate that the enhanced wake model gives improved predictions relative to Large Eddy Simulations of power losses due to wake interactions under strongly stably stratified atmospheric conditions, where wind veer effects are dominant.more » « less
-
We introduce an analytical model that describes the vertical structure of Ekman boundary layer flows coupled to the Monin-Obukhov Similarity Theory (MOST) surface layer repre- sentation, which is valid for conventionally neutral (CNBL) and stable (SBL) atmospheric conditions. The model is based on a self-similar profile of horizontal stress for both CNBL and SBL flows that merges the classic 3/2 power law profile with a MOST-consistent stress profile in the surface layer. The velocity profiles are then obtained from the Ekman momentum balance equation. The same stress model is used to derive a new self-consistent Geostrophic Drag Law (GDL). We determine the ABL height (h) using an equilibrium boundary layer height model and parameterize the surface heat flux for quasi-steady SBL flows as a function of a prescribed surface temperature cooling rate. The ABL height and GDL equations can then be solved together to obtain the friction velocity (u∗) and the cross-isobaric angle (α0) as a function of known input parameters such as the Geostrophic wind speed and surface roughness (z0). We show that the model predictions agree well with simulation data from the literature and newly generated Large Eddy Simulations (LES). These results indicate that the proposed model provides an efficient and relatively accurate self-consistent approach for predicting the mean wind velocity distribution in CNBL and SBL flows.more » « less
-
Abstract. This paper introduces JHTDB-wind (https://turbulence.idies.jhu.edu/datasets/windfarms, last access: 11 November 2025), a publicly accessible database containing large-eddy simulation (LES) data from wind farms. Building on the framework of the Johns Hopkins Turbulence Database (JHTDB), which hosts direct numerical simulation (DNS) and some LES datasets of canonical turbulent flows, JHTDB-wind stores the 4D space–time history of the flow and provides users the ability to access and query the data via a web-based virtual sensor interface. The initial dataset comprises LES results from a large wind farm with 10×6 turbines, modeled using a filtered actuator line method, under conventionally neutral atmospheric conditions. These data comprise 1 h (hour) of flow field data (velocity, pressure, potential temperature deviation, subgrid-scale (SGS) eddy viscosity, and turbine forces, approximately 15 TB (terabytes) and wind turbine data – including both turbine-level operational quantities and blade-level aerodynamic quantities (approximately 1.3 TB) – stored in Zarr and Parquet formats, respectively. Data retrieval is facilitated by the giverny Python package, allowing remote users to query the database in Python or MATLAB (C and Fortran support are available for flow field data). This paper details the simulation setup and demonstrates data access through examples that analyze wind farm flow structures and turbine performance. The framework is extensible to future datasets, including the JHTDB-wind diurnal cycle simulation analyzed in Xiao et al. (2025).more » « less
An official website of the United States government
