Search for: All records

Abstract Hydrogels are widely used in tissue engineering but conventional homogeneous polymerization often creates dense matrices that hinder cell migration and restrict extracellular matrix production. The motivation of this project was to overcome these limitations by developing a heterogeneously crosslinkable hydrogel platform that enables both cell migration and matrix deposition. We present a two-step heterogeneous polymerization approach that introduces spatial variations in matrix density, producing tunable, cell-sized pores that promote migration, proliferation, and matrix synthesis. As an implementation, gelatin was pre-assembled into microribbon-like building blocks using a Dynamic Molding process, methacrylated to introduce crosslinkable groups, chemically modified, washed, and freeze-dried. Upon rehydration, the ribbons formed a moldable paste that could be mixed with cells and photo-crosslinked into scaffolds with in situ–formed, cell-sized pores. The main novelty of this method is the introduction of chemical modifications with methacrylic anhydride (MAA), acetic anhydride (AceA), and succinic anhydride (SucA), which enable a controlled two-step heterogeneous polymerization and allow independent tuning of scaffold microstructure, mechanics, and degradation. AceA reduced crosslink density and accelerated degradation, whereas SucA promoted swelling, enhanced mechanical strength, and slowed degradation. Cell studies revealed that SucA-modified scaffolds supported superior adhesion and proliferation compared to AceA-modified and unmodified controls. Such work may significantly impact the design of next-generation scaffolds by providing a versatile platform that integrates structural, mechanical, and biochemical control for regenerative medicine applications. 

A new version of the US National Science Foundation National Center forAtmospheric Research (NSF NCAR) thermosphere-ionosphere-electrodynamicsgeneral circulation model (TIEGCM) has been developed and released. Thispaper describes the changes and improvements of the new version 3.0since its last major release (2.0) in 2016. These include: 1) increasingthe model resolution in both the horizontal and vertical dimensions, aswell as the ionospheric dynamo solver; 2) upward extension of the modelupper boundary to enable more accurate simulations of the topsideionosphere and neutral density in the lower exosphere; 3) improvedparameterization for thermal electron heating rate; 4) resolvingtransport of minor species N(2D); 5) treating helium as a major species;6) parameterization for additional physical processes, such as SAPS andelectrojet turbulent heating; 7) including parallel ion drag in theneutral momentum equation; 8) nudging of prognostic fields near thelower boundary from external data; 9) modification to the NO reactionrate and auroral heating rate; 10) outputs of diagnostic analysis termsof the equations; 11) new functionalities enabling model simulations ofcertain recurrent phenomena, such as solar flares and eclipse. Wepresent examples of the model validation during a moderate storm andcompare simulation results by turning on/off new functionalities todemonstrate the related new model capabilities. Furthermore, the modelis upgraded to comply with the new computer software environment at NSFNCAR for easy installation and run setup and with new visualizationtools. Finally, the model limitations and future development plans arediscussed. 

Abstract The gold standard to measure arterial health is vasodilation in response to nitric oxide. Vasodilation is generally measured via pressure myography of arteries isolated from animal models. However, animal arteries can be difficult to obtain and may have limited relevance to human physiology. It is, therefore, critical to engineer human cell-based arterial models capable of contraction. Vascular smooth muscle cells (SMCs) must be circumferentially aligned around the vessel lumen to contract the vessel, which is challenging to achieve in a soft blood vessel model. In this study, we used gelatin microribbons to circumferentially align SMCs inside a hydrogel channel. To accomplish this, we created tunable gelatin microribbons of varying stiffnesses and thicknesses and assessed how SMCs aligned along them. We then wrapped soft, thick microribbons around a needle and encapsulated them in a gelatin methacryloyl hydrogel, forming a microribbon-lined channel. Finally, we seeded SMCs inside the channel and showed that they adhered best to fibronectin and circumferentially aligned in response to the microribbons. Together, these data show that tunable gelatin microribbons can be used to circumferentially align SMCs inside a channel. This technique can be used to create a human artery-on-a-chip to assess vasodilation via pressure myography, as well as to align other cell types for 3Din vitromodels. 

Abstract Motivated by numerous lower atmosphere climate model hindcast simulations, we performed simulations of the Earth's atmosphere from the surface up through the thermosphere‐ionosphere to reveal for the first time the century scale changes in the upper atmosphere from the 1920s through the 2010s using the Whole Atmosphere Community Climate Model—eXtended (WACCM‐X v. 2.1). We impose solar minimum conditions to get a clear indication of the effects of the long‐term forcing from greenhouse gas increases and changes of the Earth's magnetic field and to avoid the requirement for careful removal of the 11‐year solar cycle as in some previous studies using observations and models. These previous studies have shown greenhouse gas effects in the upper atmosphere but what has been missing is the time evolution with actual greenhouse gas increases throughout the last century, including the period of less than 5% increase prior to the space age and the transition to the over 25% increase in the latter half of the 20th century. Neutral temperature, density, and ionosphere changes are close to those reported in previous studies. Also, we find high correlation between the continuous carbon dioxide rate of change over this past century and that of temperature in the thermosphere and the ionosphere, attributed to the shorter adjustment time of the upper atmosphere to greenhouse gas changes relative to the longer time in the lower atmosphere. Consequently, WACCM‐X future scenario projections can provide valuable insight in the entire atmosphere of future greenhouse gas effects and mitigation efforts. 

Herein, we report an effective strategy to maximize the antimicrobial activity of CuWO 4 /CuS hybrid composites, prepared by simply mixing CuWO 4 and CuS nanopowders with varying weight ratios in phosphate buffered saline solution by ultrasound. The tested bacteria included Gram negative (G − ) pathogenic bacteria Salmonella typhi , Gram positive (G + ) pathogenic bacteria Staphylococcus aureus , and G + bacteria Bacillus subtilis . The as-prepared composites exhibited much enhanced antibacterial efficiency compared with individual CuWO 4 and CuS nanopowders under white light irradiation. The checkerboard array analysis revealed that the combination of 8 μg mL −1 CuWO 4 and 2 μg mL −1 CuS was the most efficient and generated the optimal synergistic effect, showing a complete killing effect on all the tested bacteria from 3 strains with ∼5.8 log cell reduction. The significantly enhanced catalytic efficiency can be ascribed to the formation of a type-II heterojunction between CuWO 4 and CuS, which can effectively improve the charge separation efficiency and increase the light absorption. Moreover, the hybrid composites prepared by ultrasound-assisted physical mixing can effectively increase the interface area, which greatly facilitates the charge mobility and transfer in the interfaces between CuWO 4 and CuS. This study offers new insights into the integration of different semiconductors to optimize their synergistic effect on antimicrobial activities for water disinfection.