Search for: All records

Abstract Baryon number conservation is not guaranteed by any fundamental symmetry within the standard model, and therefore has been a subject of experimental and theoretical scrutiny for decades. So far, no evidence for baryon number violation has been observed. Large underground detectors have long been used for both neutrino detection and searches for baryon number violating processes. The next generation of large neutrino detectors will seek to improve upon the limits set by past and current experiments and will cover a range of lifetimes predicted by several Grand Unified Theories. In this White Paper, we summarize theoretical motivations and experimental aspects of searches for baryon number violation in neutrino experiments. 

Abstract SBND is the near detector of the Short-Baseline Neutrino program at Fermilab. Its location near to the Booster Neutrino Beam source and relatively large mass will allow the study of neutrino interactions on argon with unprecedented statistics. This paper describes the expected performance of the SBND photon detection system, using a simulated sample of beam neutrinos and cosmogenic particles. Its design is a dual readout concept combining a system of 120 photomultiplier tubes, used for triggering, with a system of 192 X-ARAPUCA devices, located behind the anode wire planes. Furthermore, covering the cathode plane with highly-reflective panels coated with a wavelength-shifting compound recovers part of the light emitted towards the cathode, where no optical detectors exist. We show how this new design provides a high light yield and a more uniform detection efficiency, an excellent timing resolution and an independent 3D-position reconstruction using only the scintillation light. Finally, the whole reconstruction chain is applied to recover the temporal structure of the beam spill, which is resolved with a resolution on the order of nanoseconds. 

ProtoDUNE Single-Phase (ProtoDUNE-SP) is a 770-ton liquid argon time projection chamber that operated in a hadron test beam at the CERN Neutrino Platform in 2018. We present a measurement of the total inelastic cross section of charged kaons on argon as a function of kaon energy using 6 and $7\mathrm{GeV}/c$beam momentum settings. The flux-weighted average of the extracted inelastic cross section at each beam momentum setting was measured to be $380\pm 26\mathrm{mbarns}$for the $6\mathrm{GeV}/c$setting and $379\pm 35\mathrm{mbarns}$for the $7\mathrm{GeV}/c$setting. Published by the American Physical Society2024 

A<sc>bstract</sc> A comprehensive study of the local and nonlocal amplitudes contributing to the decayB⁰→K^*0(→K⁺π⁻)μ⁺μ⁻is performed by analysing the phase-space distribution of the decay products. The analysis is based onppcollision data corresponding to an integrated luminosity of 8.4 fb⁻¹collected by the LHCb experiment. This measurement employs for the first time a model of both one-particle and two-particle nonlocal amplitudes, and utilises the complete dimuon mass spectrum without any veto regions around the narrow charmonium resonances. In this way it is possible to explicitly isolate the local and nonlocal contributions and capture the interference between them. The results show that interference with nonlocal contributions, although larger than predicted, only has a minor impact on the Wilson Coefficients determined from the fit to the data. For the local contributions, the Wilson Coefficient$$ {\mathcal{C}}_9 $$ $C_9$, responsible for vector dimuon currents, exhibits a 2.1σdeviation from the Standard Model expectation. The Wilson Coefficients$$ {\mathcal{C}}_{10} $$ $C_{10}$,$$ {\mathcal{C}}_9^{\prime } $$ $C_9^{\prime }$and$$ {\mathcal{C}}_{10}^{\prime } $$ $C_{10}^{\prime }$are all in better agreement than$$ {\mathcal{C}}_9 $$ $C_9$with the Standard Model and the global significance is at the level of 1.5σ. The model used also accounts for nonlocal contributions fromB⁰→ K^*0[τ⁺τ⁻→ μ⁺μ⁻] rescattering, resulting in the first direct measurement of thebsττvector effective-coupling$$ {\mathcal{C}}_{9\tau } $$ $C_{9\tau }$. 

The Module-0 Demonstrator is a single-phase 600 kg liquid argon time projection chamber operated as a prototype for the DUNE liquid argon near detector. Based on the ArgonCube design concept, Module-0 features a novel 80k-channel pixelated charge readout and advanced high-coverage photon detection system. In this paper, we present an analysis of an eight-day data set consisting of 25 million cosmic ray events collected in the spring of 2021. We use this sample to demonstrate the imaging performance of the charge and light readout systems as well as the signal correlations between the two. We also report argon purity and detector uniformity measurements and provide comparisons to detector simulations. 

A search for hidden-charm pentaquark states decaying to a range of ${\mathrm{\Sigma }}_c\overline{D}$and ${\mathrm{\Lambda }}_c^{+}\overline{D}$final states, as well as doubly charmed pentaquark states to ${\mathrm{\Sigma }}_{c}D$and ${\mathrm{\Lambda }}_c^{+}D$, is made using samples of proton-proton collision data corresponding to an integrated luminosity of $5.7{\mathrm{fb}}^{-1}$recorded by the LHCb detector at $\sqrt{s}=13\mathrm{TeV}$. Since no significant signals are found, upper limits are set on the pentaquark yields relative to that of the ${\mathrm{\Lambda }}_c^{+}$baryon in the ${\mathrm{\Lambda }}_c^{+}\to p{K}^{-}{\pi }^{+}$decay mode. The known pentaquark states are also investigated, and their signal yields are found to be consistent with zero in all cases. © 2024 CERN, for the LHCb Collaboration2024CERN 

A<sc>bstract</sc> A search for the fully reconstructed$$ {B}_s^0 $$ $B_s^0$→ μ⁺μ⁻γdecay is performed at the LHCb experiment using proton-proton collisions at$$ \sqrt{s} $$ $\sqrt{s}$= 13 TeV corresponding to an integrated luminosity of 5.4 fb⁻¹. No significant signal is found and upper limits on the branching fraction in intervals of the dimuon mass are set$$ {\displaystyle \begin{array}{cc}\mathcal{B}\left({B}_s^0\to {\mu}^{+}{\mu}^{-}\gamma \right)<4.2\times {10}^{-8},& m\left({\mu}^{+}{\mu}^{-}\right)\in \left[2{m}_{\mu },1.70\right]\textrm{GeV}/{c}^2,\\ {}\mathcal{B}\left({B}_s^0\to {\mu}^{+}{\mu}^{-}\gamma \right)<7.7\times {10}^{-8},&\ m\left({\mu}^{+}{\mu}^{-}\right)\in \left[\textrm{1.70,2.88}\right]\textrm{GeV}/{c}^2,\\ {}\mathcal{B}\left({B}_s^0\to {\mu}^{+}{\mu}^{-}\gamma \right)<4.2\times {10}^{-8},& m\left({\mu}^{+}{\mu}^{-}\right)\in \left[3.92,{m}_{B_s^0}\right]\textrm{GeV}/{c}^2,\end{array}} $$ $\begin{array}{cc}B\left(B_s^0\to {\mu }^{+}{\mu }^{-}\gamma \right)<4.2\times {10}^{-8},& m\left({\mu }^{+}{\mu }^{-}\right)\in \left(2m_{\mu },1.70\right)\mathrm{GeV}/c^2,\\ B\left(B_s^0\to {\mu }^{+}{\mu }^{-}\gamma \right)<7.7\times {10}^{-8},& m\left({\mu }^{+}{\mu }^{-}\right)\in \left(\mathrm{1.70,\; 2.88}\right)\mathrm{GeV}/c^2,\\ B\left(B_s^0\to {\mu }^{+}{\mu }^{-}\gamma \right)<4.2\times {10}^{-8},& m\left({\mu }^{+}{\mu }^{-}\right)\in \left(3.92,m_{B_s^0}\right)\mathrm{GeV}/c^2,\end{array}$ at 95% confidence level. Additionally, upper limits are set on the branching fraction in the [2m_μ,1.70] GeV/c²dimuon mass region excluding the contribution from the intermediateϕ(1020) meson, and in the region combining all dimuon-mass intervals. 

The LHCb upgrade represents a major change of the experiment. The detectors have been almost completely renewed to allow running at an instantaneous luminosity five times larger than that of the previous running periods. Readout of all detectors into an all-software trigger is central to the new design, facilitating the reconstruction of events at the maximum LHC interaction rate, and their selection in real time. The experiment's tracking system has been completely upgraded with a new pixel vertex detector, a silicon tracker upstream of the dipole magnet and three scintillating fibre tracking stations downstream of the magnet. The whole photon detection system of the RICH detectors has been renewed and the readout electronics of the calorimeter and muon systems have been fully overhauled. The first stage of the all-software trigger is implemented on a GPU farm. The output of the trigger provides a combination of totally reconstructed physics objects, such as tracks and vertices, ready for final analysis, and of entire events which need further offline reprocessing. This scheme required a complete revision of the computing model and rewriting of the experiment's software.