Search for: All records

As a treatment for the widely spread cardiovascular diseases (CVD), bypass vascular grafts have room for improvement in terms of mechanical property match with native arteries. A 3D‐printed nozzle is presented, featuring unique internal structures, to extrude artificial vascular grafts with a flower‐mimicking geometry. The multilayer‐structured graft wall allows the inner and outer layers to interfere sequentially during lateral expansion, replicating the nonlinear elasticity of native vessels. Both experiment and simulation results verify the necessity and benefit of the flower‐mimicking structure in obtaining the self‐toughening behavior. The gelation study of natural polymers and the utilization of sacrificial phase enables the smooth extrusion of the multiphase conduit, where computer‐assisted image analysis is employed to quantify manufacturing fidelity. The cell viability tests demonstrate the cytocompatibility of the gelatin methacryloyl (GelMA)/sodium alginate grafts, suggesting potential for further clinical research with further developments. This study presents a feasible approach for fabricating bypass vascular grafts and inspires future treatments for CVD. 

Our polyvinyl alcohol feedstock was prepared through carbic anhydride functionalization, UV curing during direct ink writing, and base treatment. The scaffold exhibited mechanical properties similar to pelvic floor tissue. 

Abstract Functionally gradient materials emulate nature's ability to seamlessly blend properties through variations in material composition, unlocking advanced engineering applications such as biomedical devices and high‐performance composites. Additive manufacturing, particularly stereolithography, enables sophisticated 3D geometries with diverse materials. However, current stereolithography‐based multi‐material 3D printing is constrained by time‐intensive material switching and compromised interfacial properties. To overcome these challenges, we present dynamic fluid‐assisted micro continuous liquid interface production (DF‐µCLIP), a high‐speed multi‐material 3D printing platform that integrates varying compositions in a fully continuous fashion. By utilizing the polymerization‐free “dead zone”, vliquid resins are seamlessly replenished within a resin bath equipped with dynamic fluidic channels and a synchronized material supply system. DF‐µCLIP achieves ultra‐fast printing speeds of 90 mm/hour with 7.4 µ m pixel‐1 resolution while enabling on‐the‐fly material transitions. This strategy enhances mechanical strength at multi‐material interface through entangled polymer networks and promotes seamless material transitions between distinct materials ilike fragile hydrogels and rigid polymers, addressing interfacial failure caused by mismatch of swelling behavior. Additionally, dynamic material replenishment with real‐time composition control enables continuous gradient printing instead of the conventional step‐wise controlled gradient. Demonstrations include polymers with gradient color transitions and gradient carbon nanotube (CNT) composites with seamlessly varying conductivity. 

Abstract Nanoparticles form long‐range micropatterns via self‐assembly or directed self‐assembly with superior mechanical, electrical, optical, magnetic, chemical, and other functional properties for broad applications, such as structural supports, thermal exchangers, optoelectronics, microelectronics, and robotics. The precisely defined particle assembly at the nanoscale with simultaneously scalable patterning at the microscale is indispensable for enabling functionality and improving the performance of devices. This article provides a comprehensive review of nanoparticle assembly formed primarily via the balance of forces at the nanoscale (e.g., van der Waals, colloidal, capillary, convection, and chemical forces) and nanoparticle‐template interactions (e.g., physical confinement, chemical functionalization, additive layer‐upon‐layer). The review commences with a general overview of nanoparticle self‐assembly, with the state‐of‐the‐art literature review and motivation. It subsequently reviews the recent progress in nanoparticle assembly without the presence of surface templates. Manufacturing techniques for surface template fabrication and their influence on nanoparticle assembly efficiency and effectiveness are then explored. The primary focus is the spatial organization and orientational preference of nanoparticles on non‐templated and pre‐templated surfaces in a controlled manner. Moreover, the article discusses broad applications of micropatterned surfaces, encompassing various fields. Finally, the review concludes with a summary of manufacturing methods, their limitations, and future trends in nanoparticle assembly.